Hi,
I am using JRuby (trunk) and wrote a bunch of specifications for my
code. Everything works fine so far.
Now I am trying to integrate RCov in my test run. I have installed
RCov without the C extensions. I tried it with a simple script and it
worked (pretty slow, but it doesn?t matter).
But when I add the rcov options to my Rake task, RCov is not invoke
properly!
Rakefile:
Spec::Rake::SpecTask.new(''specs'') do |t|
t.spec_files = FileList[''spec/**/*.rb'']
t.rcov = true
t.rcov_opts = [''--exclude'', ''spec'']
t.verbose = true
end
Output:
...
Finished in 11.376 seconds
187 examples, 0 failures, 10 pending
Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov
Started
Finished in 0.0080 seconds.
0 tests, 0 assertions, 0 failures, 0 errors
Why is rcov started at the end of the test run?
On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de> wrote:> Hi, > > I am using JRuby (trunk) and wrote a bunch of specifications for my > code. Everything works fine so far. > Now I am trying to integrate RCov in my test run. I have installed > RCov without the C extensions. I tried it with a simple script and it > worked (pretty slow, but it doesn?t matter). > But when I add the rcov options to my Rake task, RCov is not invoke > properly! > > Rakefile: > Spec::Rake::SpecTask.new(''specs'') do |t| > t.spec_files = FileList[''spec/**/*.rb''] > t.rcov = true > t.rcov_opts = [''--exclude'', ''spec''] > t.verbose = true > end > > Output: > ... > Finished in 11.376 seconds > > 187 examples, 0 failures, 10 pending > Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > Started > > Finished in 0.0080 seconds. > > 0 tests, 0 assertions, 0 failures, 0 errors >This is Test::Unit output> Why is rcov started at the end of the test run?Did you mean: Why is Test::Unit started at the end of the RSpec run? I''m not sure exactly what you''re asking. Aslak> _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
This is not Test::Unit output! As you can see I created a Rake task to run my specs and tried to integrate rcov as described on http://rspec.info/documentation/tools/rcov.html RSpec works as expected (187 examples, 0 failures, 10 pending) but I am missing the RCov report. Am 17.03.2008 um 15:43 schrieb aslak hellesoy:> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de > > wrote: >> Hi, >> >> I am using JRuby (trunk) and wrote a bunch of specifications for my >> code. Everything works fine so far. >> Now I am trying to integrate RCov in my test run. I have installed >> RCov without the C extensions. I tried it with a simple script and it >> worked (pretty slow, but it doesn?t matter). >> But when I add the rcov options to my Rake task, RCov is not invoke >> properly! >> >> Rakefile: >> Spec::Rake::SpecTask.new(''specs'') do |t| >> t.spec_files = FileList[''spec/**/*.rb''] >> t.rcov = true >> t.rcov_opts = [''--exclude'', ''spec''] >> t.verbose = true >> end >> >> Output: >> ... >> Finished in 11.376 seconds >> >> 187 examples, 0 failures, 10 pending >> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >> Started >> >> Finished in 0.0080 seconds. >> >> 0 tests, 0 assertions, 0 failures, 0 errors >> > > This is Test::Unit output > >> Why is rcov started at the end of the test run? > > Did you mean: Why is Test::Unit started at the end of the RSpec run? > > I''m not sure exactly what you''re asking. > > Aslak > >> _______________________________________________ >> rspec-users mailing list >> rspec-users at rubyforge.org >> http://rubyforge.org/mailman/listinfo/rspec-users >>
On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de> wrote:> This is not Test::Unit output!The following text - taken from your first email - is Test::Unit output. It is not RCov or RSpec output. ------------8<------------ Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov Started Finished in 0.0080 seconds. 0 tests, 0 assertions, 0 failures, 0 errors ------------8<------------> As you can see I created a Rake task to run my specs and tried to > integrate rcov as described on http://rspec.info/documentation/tools/rcov.html > RSpec works as expected (187 examples, 0 failures, 10 pending) but I > am missing the RCov report. >In your first email you asked: Why is rcov started at the end of the test run? I got confused about what you mean by "test run" (that usually mean Test::Unit run - and you do have Test::Unit output). Are you trying to figure out what order things are happening in, or are you trying to figure out why you''re not getting an RCov report? Aslak> > Am 17.03.2008 um 15:43 schrieb aslak hellesoy: > > > > > On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de > > > wrote: > >> Hi, > >> > >> I am using JRuby (trunk) and wrote a bunch of specifications for my > >> code. Everything works fine so far. > >> Now I am trying to integrate RCov in my test run. I have installed > >> RCov without the C extensions. I tried it with a simple script and it > >> worked (pretty slow, but it doesn?t matter). > >> But when I add the rcov options to my Rake task, RCov is not invoke > >> properly! > >> > >> Rakefile: > >> Spec::Rake::SpecTask.new(''specs'') do |t| > >> t.spec_files = FileList[''spec/**/*.rb''] > >> t.rcov = true > >> t.rcov_opts = [''--exclude'', ''spec''] > >> t.verbose = true > >> end > >> > >> Output: > >> ... > >> Finished in 11.376 seconds > >> > >> 187 examples, 0 failures, 10 pending > >> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > >> Started > >> > >> Finished in 0.0080 seconds. > >> > >> 0 tests, 0 assertions, 0 failures, 0 errors > >> > > > > This is Test::Unit output > > > >> Why is rcov started at the end of the test run? > > > > Did you mean: Why is Test::Unit started at the end of the RSpec run? > > > > I''m not sure exactly what you''re asking. > > > > Aslak > > > >> _______________________________________________ > >> rspec-users mailing list > >> rspec-users at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/rspec-users > >> > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
Ok, so the question is then why I don?t get an RCov report? Sorry for the "test run". Better call it an RSpec run? Am 17.03.2008 um 16:10 schrieb aslak hellesoy:> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de > > wrote: >> This is not Test::Unit output! > > The following text - taken from your first email - is Test::Unit > output. It is not RCov or RSpec output. > > ------------8<------------ > Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > Started > > Finished in 0.0080 seconds. > > 0 tests, 0 assertions, 0 failures, 0 errors > ------------8<------------ > >> As you can see I created a Rake task to run my specs and tried to >> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html >> RSpec works as expected (187 examples, 0 failures, 10 pending) but I >> am missing the RCov report. >> > > In your first email you asked: Why is rcov started at the end of the > test run? > I got confused about what you mean by "test run" (that usually mean > Test::Unit run - and you do have Test::Unit output). > > Are you trying to figure out what order things are happening in, or > are you trying to figure out why you''re not getting an RCov report? > > Aslak > >> >> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: >> >> >> >>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de >>>> wrote: >>>> Hi, >>>> >>>> I am using JRuby (trunk) and wrote a bunch of specifications for my >>>> code. Everything works fine so far. >>>> Now I am trying to integrate RCov in my test run. I have installed >>>> RCov without the C extensions. I tried it with a simple script >>>> and it >>>> worked (pretty slow, but it doesn?t matter). >>>> But when I add the rcov options to my Rake task, RCov is not invoke >>>> properly! >>>> >>>> Rakefile: >>>> Spec::Rake::SpecTask.new(''specs'') do |t| >>>> t.spec_files = FileList[''spec/**/*.rb''] >>>> t.rcov = true >>>> t.rcov_opts = [''--exclude'', ''spec''] >>>> t.verbose = true >>>> end >>>> >>>> Output: >>>> ... >>>> Finished in 11.376 seconds >>>> >>>> 187 examples, 0 failures, 10 pending >>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>>> Started >>>> >>>> Finished in 0.0080 seconds. >>>> >>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>> >>> >>> This is Test::Unit output >>> >>>> Why is rcov started at the end of the test run? >>> >>> Did you mean: Why is Test::Unit started at the end of the RSpec run? >>> >>> I''m not sure exactly what you''re asking. >>> >>> Aslak >>> >>>> _______________________________________________ >>>> rspec-users mailing list >>>> rspec-users at rubyforge.org >>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>> >> >> _______________________________________________ >> rspec-users mailing list >> rspec-users at rubyforge.org >> http://rubyforge.org/mailman/listinfo/rspec-users >>
On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de> wrote:> Ok, so the question is then why I don?t get an RCov report? Sorry for > the "test run". Better call it an RSpec run? >RSpec run is much clearer, thanks :-) I''m looking into the problem, but I''m struggling to install RCov into JRuby. I get the following error: $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov Building native extensions. This could take a while... extconf.rb:1: no such file to load -- mkmf (LoadError) ERROR: Error installing rcov: ERROR: Failed to build gem native extension. /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov Gem files will remain installed in /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for inspection. Results logged to /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/rcovrt/gem_make.out How did you install rcov bypassing the building of the C extensions? Aslak> > Am 17.03.2008 um 16:10 schrieb aslak hellesoy: > > > > > On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de > > > wrote: > >> This is not Test::Unit output! > > > > The following text - taken from your first email - is Test::Unit > > output. It is not RCov or RSpec output. > > > > ------------8<------------ > > Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > > Started > > > > Finished in 0.0080 seconds. > > > > 0 tests, 0 assertions, 0 failures, 0 errors > > ------------8<------------ > > > >> As you can see I created a Rake task to run my specs and tried to > >> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html > >> RSpec works as expected (187 examples, 0 failures, 10 pending) but I > >> am missing the RCov report. > >> > > > > In your first email you asked: Why is rcov started at the end of the > > test run? > > I got confused about what you mean by "test run" (that usually mean > > Test::Unit run - and you do have Test::Unit output). > > > > Are you trying to figure out what order things are happening in, or > > are you trying to figure out why you''re not getting an RCov report? > > > > Aslak > > > >> > >> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: > >> > >> > >> > >>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de > >>>> wrote: > >>>> Hi, > >>>> > >>>> I am using JRuby (trunk) and wrote a bunch of specifications for my > >>>> code. Everything works fine so far. > >>>> Now I am trying to integrate RCov in my test run. I have installed > >>>> RCov without the C extensions. I tried it with a simple script > >>>> and it > >>>> worked (pretty slow, but it doesn?t matter). > >>>> But when I add the rcov options to my Rake task, RCov is not invoke > >>>> properly! > >>>> > >>>> Rakefile: > >>>> Spec::Rake::SpecTask.new(''specs'') do |t| > >>>> t.spec_files = FileList[''spec/**/*.rb''] > >>>> t.rcov = true > >>>> t.rcov_opts = [''--exclude'', ''spec''] > >>>> t.verbose = true > >>>> end > >>>> > >>>> Output: > >>>> ... > >>>> Finished in 11.376 seconds > >>>> > >>>> 187 examples, 0 failures, 10 pending > >>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > >>>> Started > >>>> > >>>> Finished in 0.0080 seconds. > >>>> > >>>> 0 tests, 0 assertions, 0 failures, 0 errors > >>>> > >>> > >>> This is Test::Unit output > >>> > >>>> Why is rcov started at the end of the test run? > >>> > >>> Did you mean: Why is Test::Unit started at the end of the RSpec run? > >>> > >>> I''m not sure exactly what you''re asking. > >>> > >>> Aslak > >>> > >>>> _______________________________________________ > >>>> rspec-users mailing list > >>>> rspec-users at rubyforge.org > >>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>> > >> > >> _______________________________________________ > >> rspec-users mailing list > >> rspec-users at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/rspec-users > >> > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
1. Download http://eigenclass.org/static/rcov/rcov-0.8.1.2.tar.gz and extract the archive 2. jruby -S setup.rb all --without-ext 3. Change shebang of <jruby-dir>/bin/rcov to #!/usr/bin/env jruby 4. rcov script.rb should work now (warning appears, that no extensions are installed) Am 17.03.2008 um 17:37 schrieb aslak hellesoy:> On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de > > wrote: >> Ok, so the question is then why I don?t get an RCov report? Sorry for >> the "test run". Better call it an RSpec run? >> > > RSpec run is much clearer, thanks :-) > > I''m looking into the problem, but I''m struggling to install RCov into > JRuby. I get the following error: > > $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov > Building native extensions. This could take a while... > extconf.rb:1: no such file to load -- mkmf (LoadError) > ERROR: Error installing rcov: > ERROR: Failed to build gem native extension. > > /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov > > > Gem files will remain installed in > /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for > inspection. > Results logged to > /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/ > rcovrt/gem_make.out > > How did you install rcov bypassing the building of the C extensions? > > Aslak >> >> Am 17.03.2008 um 16:10 schrieb aslak hellesoy: >> >> >> >>> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de >>>> wrote: >>>> This is not Test::Unit output! >>> >>> The following text - taken from your first email - is Test::Unit >>> output. It is not RCov or RSpec output. >>> >>> ------------8<------------ >>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>> Started >>> >>> Finished in 0.0080 seconds. >>> >>> 0 tests, 0 assertions, 0 failures, 0 errors >>> ------------8<------------ >>> >>>> As you can see I created a Rake task to run my specs and tried to >>>> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html >>>> RSpec works as expected (187 examples, 0 failures, 10 pending) >>>> but I >>>> am missing the RCov report. >>>> >>> >>> In your first email you asked: Why is rcov started at the end of the >>> test run? >>> I got confused about what you mean by "test run" (that usually mean >>> Test::Unit run - and you do have Test::Unit output). >>> >>> Are you trying to figure out what order things are happening in, or >>> are you trying to figure out why you''re not getting an RCov report? >>> >>> Aslak >>> >>>> >>>> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: >>>> >>>> >>>> >>>>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de >>>>>> wrote: >>>>>> Hi, >>>>>> >>>>>> I am using JRuby (trunk) and wrote a bunch of specifications >>>>>> for my >>>>>> code. Everything works fine so far. >>>>>> Now I am trying to integrate RCov in my test run. I have >>>>>> installed >>>>>> RCov without the C extensions. I tried it with a simple script >>>>>> and it >>>>>> worked (pretty slow, but it doesn?t matter). >>>>>> But when I add the rcov options to my Rake task, RCov is not >>>>>> invoke >>>>>> properly! >>>>>> >>>>>> Rakefile: >>>>>> Spec::Rake::SpecTask.new(''specs'') do |t| >>>>>> t.spec_files = FileList[''spec/**/*.rb''] >>>>>> t.rcov = true >>>>>> t.rcov_opts = [''--exclude'', ''spec''] >>>>>> t.verbose = true >>>>>> end >>>>>> >>>>>> Output: >>>>>> ... >>>>>> Finished in 11.376 seconds >>>>>> >>>>>> 187 examples, 0 failures, 10 pending >>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>>>>> Started >>>>>> >>>>>> Finished in 0.0080 seconds. >>>>>> >>>>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>>>> >>>>> >>>>> This is Test::Unit output >>>>> >>>>>> Why is rcov started at the end of the test run? >>>>> >>>>> Did you mean: Why is Test::Unit started at the end of the RSpec >>>>> run? >>>>> >>>>> I''m not sure exactly what you''re asking. >>>>> >>>>> Aslak >>>>> >>>>>> _______________________________________________ >>>>>> rspec-users mailing list >>>>>> rspec-users at rubyforge.org >>>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>>> >>>> >>>> _______________________________________________ >>>> rspec-users mailing list >>>> rspec-users at rubyforge.org >>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>> >> >> _______________________________________________ >> rspec-users mailing list >> rspec-users at rubyforge.org >> http://rubyforge.org/mailman/listinfo/rspec-users >>
On Mon, Mar 17, 2008 at 5:47 PM, Tobias Torkler <tobias.torkler at meco.de> wrote:> 1. Download http://eigenclass.org/static/rcov/rcov-0.8.1.2.tar.gz and > extract the archive > 2. jruby -S setup.rb all --without-ext > 3. Change shebang of <jruby-dir>/bin/rcov to #!/usr/bin/env jruby > 4. rcov script.rb should work now (warning appears, that no extensions > are installed) >Thanks, those installation instructions were useful. Unfortunately, I''m unable to run RCov 0.8.1.2 on JRuby 1.1.RC2 at all: $ /usr/local/jruby-1.1RC2/bin/jruby -S rcov --version Exception in thread "main" java.lang.RuntimeException: MethodBlock does not have a static scope; this should not be called at org.jruby.runtime.MethodBlock.getStaticScope(MethodBlock.java:128) at org.jruby.RubyModule.createProcMethod(RubyModule.java:1079) ... (lots more) ... at org.jruby.Main.main(Main.java:79) Can you recommend a JRuby version where RCov will actually start up? Aslak> > Am 17.03.2008 um 17:37 schrieb aslak hellesoy: > > > > > On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de > > > wrote: > >> Ok, so the question is then why I don?t get an RCov report? Sorry for > >> the "test run". Better call it an RSpec run? > >> > > > > RSpec run is much clearer, thanks :-) > > > > I''m looking into the problem, but I''m struggling to install RCov into > > JRuby. I get the following error: > > > > $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov > > Building native extensions. This could take a while... > > extconf.rb:1: no such file to load -- mkmf (LoadError) > > ERROR: Error installing rcov: > > ERROR: Failed to build gem native extension. > > > > /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov > > > > > > Gem files will remain installed in > > /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for > > inspection. > > Results logged to > > /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/ > > rcovrt/gem_make.out > > > > How did you install rcov bypassing the building of the C extensions? > > > > Aslak > >> > >> Am 17.03.2008 um 16:10 schrieb aslak hellesoy: > >> > >> > >> > >>> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de > >>>> wrote: > >>>> This is not Test::Unit output! > >>> > >>> The following text - taken from your first email - is Test::Unit > >>> output. It is not RCov or RSpec output. > >>> > >>> ------------8<------------ > >>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > >>> Started > >>> > >>> Finished in 0.0080 seconds. > >>> > >>> 0 tests, 0 assertions, 0 failures, 0 errors > >>> ------------8<------------ > >>> > >>>> As you can see I created a Rake task to run my specs and tried to > >>>> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html > >>>> RSpec works as expected (187 examples, 0 failures, 10 pending) > >>>> but I > >>>> am missing the RCov report. > >>>> > >>> > >>> In your first email you asked: Why is rcov started at the end of the > >>> test run? > >>> I got confused about what you mean by "test run" (that usually mean > >>> Test::Unit run - and you do have Test::Unit output). > >>> > >>> Are you trying to figure out what order things are happening in, or > >>> are you trying to figure out why you''re not getting an RCov report? > >>> > >>> Aslak > >>> > >>>> > >>>> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: > >>>> > >>>> > >>>> > >>>>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de > >>>>>> wrote: > >>>>>> Hi, > >>>>>> > >>>>>> I am using JRuby (trunk) and wrote a bunch of specifications > >>>>>> for my > >>>>>> code. Everything works fine so far. > >>>>>> Now I am trying to integrate RCov in my test run. I have > >>>>>> installed > >>>>>> RCov without the C extensions. I tried it with a simple script > >>>>>> and it > >>>>>> worked (pretty slow, but it doesn?t matter). > >>>>>> But when I add the rcov options to my Rake task, RCov is not > >>>>>> invoke > >>>>>> properly! > >>>>>> > >>>>>> Rakefile: > >>>>>> Spec::Rake::SpecTask.new(''specs'') do |t| > >>>>>> t.spec_files = FileList[''spec/**/*.rb''] > >>>>>> t.rcov = true > >>>>>> t.rcov_opts = [''--exclude'', ''spec''] > >>>>>> t.verbose = true > >>>>>> end > >>>>>> > >>>>>> Output: > >>>>>> ... > >>>>>> Finished in 11.376 seconds > >>>>>> > >>>>>> 187 examples, 0 failures, 10 pending > >>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > >>>>>> Started > >>>>>> > >>>>>> Finished in 0.0080 seconds. > >>>>>> > >>>>>> 0 tests, 0 assertions, 0 failures, 0 errors > >>>>>> > >>>>> > >>>>> This is Test::Unit output > >>>>> > >>>>>> Why is rcov started at the end of the test run? > >>>>> > >>>>> Did you mean: Why is Test::Unit started at the end of the RSpec > >>>>> run? > >>>>> > >>>>> I''m not sure exactly what you''re asking. > >>>>> > >>>>> Aslak > >>>>> > >>>>>> _______________________________________________ > >>>>>> rspec-users mailing list > >>>>>> rspec-users at rubyforge.org > >>>>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>>>> > >>>> > >>>> _______________________________________________ > >>>> rspec-users mailing list > >>>> rspec-users at rubyforge.org > >>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>> > >> > >> _______________________________________________ > >> rspec-users mailing list > >> rspec-users at rubyforge.org > >> http://rubyforge.org/mailman/listinfo/rspec-users > >> > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
That?s right, sorry! There was a call and it will be fixed in RC3. But you can checkout the sources (http://svn.codehaus.org/jruby/trunk/jruby/ ) and build the jruby.jar via ant. It will work then! I know it?s complicated, but I need this for my diploma thesis and I appreciate your help! Am 17.03.2008 um 19:54 schrieb aslak hellesoy:> On Mon, Mar 17, 2008 at 5:47 PM, Tobias Torkler <tobias.torkler at meco.de > > wrote: >> 1. Download http://eigenclass.org/static/rcov/rcov-0.8.1.2.tar.gz and >> extract the archive >> 2. jruby -S setup.rb all --without-ext >> 3. Change shebang of <jruby-dir>/bin/rcov to #!/usr/bin/env jruby >> 4. rcov script.rb should work now (warning appears, that no >> extensions >> are installed) >> > > Thanks, those installation instructions were useful. > > Unfortunately, I''m unable to run RCov 0.8.1.2 on JRuby 1.1.RC2 at all: > > $ /usr/local/jruby-1.1RC2/bin/jruby -S rcov --version > Exception in thread "main" java.lang.RuntimeException: MethodBlock > does not have a static scope; this should not be called > at > org.jruby.runtime.MethodBlock.getStaticScope(MethodBlock.java:128) > at org.jruby.RubyModule.createProcMethod(RubyModule.java:1079) > ... > (lots more) > ... > at org.jruby.Main.main(Main.java:79) > > Can you recommend a JRuby version where RCov will actually start up? > > Aslak > >> >> Am 17.03.2008 um 17:37 schrieb aslak hellesoy: >> >> >> >>> On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de >>>> wrote: >>>> Ok, so the question is then why I don?t get an RCov report? Sorry >>>> for >>>> the "test run". Better call it an RSpec run? >>>> >>> >>> RSpec run is much clearer, thanks :-) >>> >>> I''m looking into the problem, but I''m struggling to install RCov >>> into >>> JRuby. I get the following error: >>> >>> $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov >>> Building native extensions. This could take a while... >>> extconf.rb:1: no such file to load -- mkmf (LoadError) >>> ERROR: Error installing rcov: >>> ERROR: Failed to build gem native extension. >>> >>> /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov >>> >>> >>> Gem files will remain installed in >>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for >>> inspection. >>> Results logged to >>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/ >>> rcovrt/gem_make.out >>> >>> How did you install rcov bypassing the building of the C extensions? >>> >>> Aslak >>>> >>>> Am 17.03.2008 um 16:10 schrieb aslak hellesoy: >>>> >>>> >>>> >>>>> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de >>>>>> wrote: >>>>>> This is not Test::Unit output! >>>>> >>>>> The following text - taken from your first email - is Test::Unit >>>>> output. It is not RCov or RSpec output. >>>>> >>>>> ------------8<------------ >>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>>>> Started >>>>> >>>>> Finished in 0.0080 seconds. >>>>> >>>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>>> ------------8<------------ >>>>> >>>>>> As you can see I created a Rake task to run my specs and tried to >>>>>> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html >>>>>> RSpec works as expected (187 examples, 0 failures, 10 pending) >>>>>> but I >>>>>> am missing the RCov report. >>>>>> >>>>> >>>>> In your first email you asked: Why is rcov started at the end of >>>>> the >>>>> test run? >>>>> I got confused about what you mean by "test run" (that usually >>>>> mean >>>>> Test::Unit run - and you do have Test::Unit output). >>>>> >>>>> Are you trying to figure out what order things are happening in, >>>>> or >>>>> are you trying to figure out why you''re not getting an RCov >>>>> report? >>>>> >>>>> Aslak >>>>> >>>>>> >>>>>> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: >>>>>> >>>>>> >>>>>> >>>>>>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de >>>>>>>> wrote: >>>>>>>> Hi, >>>>>>>> >>>>>>>> I am using JRuby (trunk) and wrote a bunch of specifications >>>>>>>> for my >>>>>>>> code. Everything works fine so far. >>>>>>>> Now I am trying to integrate RCov in my test run. I have >>>>>>>> installed >>>>>>>> RCov without the C extensions. I tried it with a simple script >>>>>>>> and it >>>>>>>> worked (pretty slow, but it doesn?t matter). >>>>>>>> But when I add the rcov options to my Rake task, RCov is not >>>>>>>> invoke >>>>>>>> properly! >>>>>>>> >>>>>>>> Rakefile: >>>>>>>> Spec::Rake::SpecTask.new(''specs'') do |t| >>>>>>>> t.spec_files = FileList[''spec/**/*.rb''] >>>>>>>> t.rcov = true >>>>>>>> t.rcov_opts = [''--exclude'', ''spec''] >>>>>>>> t.verbose = true >>>>>>>> end >>>>>>>> >>>>>>>> Output: >>>>>>>> ... >>>>>>>> Finished in 11.376 seconds >>>>>>>> >>>>>>>> 187 examples, 0 failures, 10 pending >>>>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>>>>>>> Started >>>>>>>> >>>>>>>> Finished in 0.0080 seconds. >>>>>>>> >>>>>>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>>>>>> >>>>>>> >>>>>>> This is Test::Unit output >>>>>>> >>>>>>>> Why is rcov started at the end of the test run? >>>>>>> >>>>>>> Did you mean: Why is Test::Unit started at the end of the RSpec >>>>>>> run? >>>>>>> >>>>>>> I''m not sure exactly what you''re asking. >>>>>>> >>>>>>> Aslak >>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> rspec-users mailing list >>>>>>>> rspec-users at rubyforge.org >>>>>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> rspec-users mailing list >>>>>> rspec-users at rubyforge.org >>>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>>> >>>> >>>> _______________________________________________ >>>> rspec-users mailing list >>>> rspec-users at rubyforge.org >>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>> >> >> _______________________________________________ >> rspec-users mailing list >> rspec-users at rubyforge.org >> http://rubyforge.org/mailman/listinfo/rspec-users >>
Issue is solved!!! I had a require ''test/unit'' in my spec_helper.rb. I removed it and it works now. Am 17.03.2008 um 20:08 schrieb Tobias Torkler:> That?s right, sorry! There was a call and it will be fixed in RC3. > But you can checkout the sources (http://svn.codehaus.org/jruby/trunk/jruby/ > ) and build the jruby.jar via ant. > It will work then! > > I know it?s complicated, but I need this for my diploma thesis and I > appreciate your help! > > > Am 17.03.2008 um 19:54 schrieb aslak hellesoy: > >> On Mon, Mar 17, 2008 at 5:47 PM, Tobias Torkler <tobias.torkler at meco.de >>> wrote: >>> 1. Download http://eigenclass.org/static/rcov/rcov-0.8.1.2.tar.gz >>> and >>> extract the archive >>> 2. jruby -S setup.rb all --without-ext >>> 3. Change shebang of <jruby-dir>/bin/rcov to #!/usr/bin/env jruby >>> 4. rcov script.rb should work now (warning appears, that no >>> extensions >>> are installed) >>> >> >> Thanks, those installation instructions were useful. >> >> Unfortunately, I''m unable to run RCov 0.8.1.2 on JRuby 1.1.RC2 at >> all: >> >> $ /usr/local/jruby-1.1RC2/bin/jruby -S rcov --version >> Exception in thread "main" java.lang.RuntimeException: MethodBlock >> does not have a static scope; this should not be called >> at >> org.jruby.runtime.MethodBlock.getStaticScope(MethodBlock.java:128) >> at org.jruby.RubyModule.createProcMethod(RubyModule.java:1079) >> ... >> (lots more) >> ... >> at org.jruby.Main.main(Main.java:79) >> >> Can you recommend a JRuby version where RCov will actually start up? >> >> Aslak >> >>> >>> Am 17.03.2008 um 17:37 schrieb aslak hellesoy: >>> >>> >>> >>>> On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de >>>>> wrote: >>>>> Ok, so the question is then why I don?t get an RCov report? Sorry >>>>> for >>>>> the "test run". Better call it an RSpec run? >>>>> >>>> >>>> RSpec run is much clearer, thanks :-) >>>> >>>> I''m looking into the problem, but I''m struggling to install RCov >>>> into >>>> JRuby. I get the following error: >>>> >>>> $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov >>>> Building native extensions. This could take a while... >>>> extconf.rb:1: no such file to load -- mkmf (LoadError) >>>> ERROR: Error installing rcov: >>>> ERROR: Failed to build gem native extension. >>>> >>>> /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov >>>> >>>> >>>> Gem files will remain installed in >>>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for >>>> inspection. >>>> Results logged to >>>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/ >>>> rcovrt/gem_make.out >>>> >>>> How did you install rcov bypassing the building of the C >>>> extensions? >>>> >>>> Aslak >>>>> >>>>> Am 17.03.2008 um 16:10 schrieb aslak hellesoy: >>>>> >>>>> >>>>> >>>>>> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de >>>>>>> wrote: >>>>>>> This is not Test::Unit output! >>>>>> >>>>>> The following text - taken from your first email - is Test::Unit >>>>>> output. It is not RCov or RSpec output. >>>>>> >>>>>> ------------8<------------ >>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov >>>>>> Started >>>>>> >>>>>> Finished in 0.0080 seconds. >>>>>> >>>>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>>>> ------------8<------------ >>>>>> >>>>>>> As you can see I created a Rake task to run my specs and tried >>>>>>> to >>>>>>> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html >>>>>>> RSpec works as expected (187 examples, 0 failures, 10 pending) >>>>>>> but I >>>>>>> am missing the RCov report. >>>>>>> >>>>>> >>>>>> In your first email you asked: Why is rcov started at the end of >>>>>> the >>>>>> test run? >>>>>> I got confused about what you mean by "test run" (that usually >>>>>> mean >>>>>> Test::Unit run - and you do have Test::Unit output). >>>>>> >>>>>> Are you trying to figure out what order things are happening in, >>>>>> or >>>>>> are you trying to figure out why you''re not getting an RCov >>>>>> report? >>>>>> >>>>>> Aslak >>>>>> >>>>>>> >>>>>>> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de >>>>>>>>> wrote: >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I am using JRuby (trunk) and wrote a bunch of specifications >>>>>>>>> for my >>>>>>>>> code. Everything works fine so far. >>>>>>>>> Now I am trying to integrate RCov in my test run. I have >>>>>>>>> installed >>>>>>>>> RCov without the C extensions. I tried it with a simple script >>>>>>>>> and it >>>>>>>>> worked (pretty slow, but it doesn?t matter). >>>>>>>>> But when I add the rcov options to my Rake task, RCov is not >>>>>>>>> invoke >>>>>>>>> properly! >>>>>>>>> >>>>>>>>> Rakefile: >>>>>>>>> Spec::Rake::SpecTask.new(''specs'') do |t| >>>>>>>>> t.spec_files = FileList[''spec/**/*.rb''] >>>>>>>>> t.rcov = true >>>>>>>>> t.rcov_opts = [''--exclude'', ''spec''] >>>>>>>>> t.verbose = true >>>>>>>>> end >>>>>>>>> >>>>>>>>> Output: >>>>>>>>> ... >>>>>>>>> Finished in 11.376 seconds >>>>>>>>> >>>>>>>>> 187 examples, 0 failures, 10 pending >>>>>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/ >>>>>>>>> rcov >>>>>>>>> Started >>>>>>>>> >>>>>>>>> Finished in 0.0080 seconds. >>>>>>>>> >>>>>>>>> 0 tests, 0 assertions, 0 failures, 0 errors >>>>>>>>> >>>>>>>> >>>>>>>> This is Test::Unit output >>>>>>>> >>>>>>>>> Why is rcov started at the end of the test run? >>>>>>>> >>>>>>>> Did you mean: Why is Test::Unit started at the end of the RSpec >>>>>>>> run? >>>>>>>> >>>>>>>> I''m not sure exactly what you''re asking. >>>>>>>> >>>>>>>> Aslak >>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> rspec-users mailing list >>>>>>>>> rspec-users at rubyforge.org >>>>>>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> rspec-users mailing list >>>>>>> rspec-users at rubyforge.org >>>>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>>>> >>>>> >>>>> _______________________________________________ >>>>> rspec-users mailing list >>>>> rspec-users at rubyforge.org >>>>> http://rubyforge.org/mailman/listinfo/rspec-users >>>>> >>> >>> _______________________________________________ >>> rspec-users mailing list >>> rspec-users at rubyforge.org >>> http://rubyforge.org/mailman/listinfo/rspec-users >>> > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users
On Mon, Mar 17, 2008 at 10:04 PM, Tobias Torkler <tobias.torkler at meco.de> wrote:> Issue is solved!!! > I had a require ''test/unit'' in my spec_helper.rb. I removed it and it > works now.Good. That makes sense. Two competing exit hooks or something. I bet your Test::Unit output went away too. Aslak> > > Am 17.03.2008 um 20:08 schrieb Tobias Torkler: > > > > > That?s right, sorry! There was a call and it will be fixed in RC3. > > But you can checkout the sources (http://svn.codehaus.org/jruby/trunk/jruby/ > > ) and build the jruby.jar via ant. > > It will work then! > > > > I know it?s complicated, but I need this for my diploma thesis and I > > appreciate your help! > > > > > > Am 17.03.2008 um 19:54 schrieb aslak hellesoy: > > > >> On Mon, Mar 17, 2008 at 5:47 PM, Tobias Torkler <tobias.torkler at meco.de > >>> wrote: > >>> 1. Download http://eigenclass.org/static/rcov/rcov-0.8.1.2.tar.gz > >>> and > >>> extract the archive > >>> 2. jruby -S setup.rb all --without-ext > >>> 3. Change shebang of <jruby-dir>/bin/rcov to #!/usr/bin/env jruby > >>> 4. rcov script.rb should work now (warning appears, that no > >>> extensions > >>> are installed) > >>> > >> > >> Thanks, those installation instructions were useful. > >> > >> Unfortunately, I''m unable to run RCov 0.8.1.2 on JRuby 1.1.RC2 at > >> all: > >> > >> $ /usr/local/jruby-1.1RC2/bin/jruby -S rcov --version > >> Exception in thread "main" java.lang.RuntimeException: MethodBlock > >> does not have a static scope; this should not be called > >> at > >> org.jruby.runtime.MethodBlock.getStaticScope(MethodBlock.java:128) > >> at org.jruby.RubyModule.createProcMethod(RubyModule.java:1079) > >> ... > >> (lots more) > >> ... > >> at org.jruby.Main.main(Main.java:79) > >> > >> Can you recommend a JRuby version where RCov will actually start up? > >> > >> Aslak > >> > >>> > >>> Am 17.03.2008 um 17:37 schrieb aslak hellesoy: > >>> > >>> > >>> > >>>> On Mon, Mar 17, 2008 at 4:23 PM, Tobias Torkler <tobias.torkler at meco.de > >>>>> wrote: > >>>>> Ok, so the question is then why I don?t get an RCov report? Sorry > >>>>> for > >>>>> the "test run". Better call it an RSpec run? > >>>>> > >>>> > >>>> RSpec run is much clearer, thanks :-) > >>>> > >>>> I''m looking into the problem, but I''m struggling to install RCov > >>>> into > >>>> JRuby. I get the following error: > >>>> > >>>> $ /usr/local/jruby-1.1RC2/bin/jruby -S gem install rcov > >>>> Building native extensions. This could take a while... > >>>> extconf.rb:1: no such file to load -- mkmf (LoadError) > >>>> ERROR: Error installing rcov: > >>>> ERROR: Failed to build gem native extension. > >>>> > >>>> /usr/local/jruby-1.1RC2/bin/jruby extconf.rb install rcov > >>>> > >>>> > >>>> Gem files will remain installed in > >>>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0 for > >>>> inspection. > >>>> Results logged to > >>>> /usr/local/jruby-1.1RC2/lib/ruby/gems/1.8/gems/rcov-0.8.1.2.0/ext/ > >>>> rcovrt/gem_make.out > >>>> > >>>> How did you install rcov bypassing the building of the C > >>>> extensions? > >>>> > >>>> Aslak > >>>>> > >>>>> Am 17.03.2008 um 16:10 schrieb aslak hellesoy: > >>>>> > >>>>> > >>>>> > >>>>>> On Mon, Mar 17, 2008 at 3:50 PM, Tobias Torkler <tobias.torkler at meco.de > >>>>>>> wrote: > >>>>>>> This is not Test::Unit output! > >>>>>> > >>>>>> The following text - taken from your first email - is Test::Unit > >>>>>> output. It is not RCov or RSpec output. > >>>>>> > >>>>>> ------------8<------------ > >>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/rcov > >>>>>> Started > >>>>>> > >>>>>> Finished in 0.0080 seconds. > >>>>>> > >>>>>> 0 tests, 0 assertions, 0 failures, 0 errors > >>>>>> ------------8<------------ > >>>>>> > >>>>>>> As you can see I created a Rake task to run my specs and tried > >>>>>>> to > >>>>>>> integrate rcov as described on http://rspec.info/documentation/tools/rcov.html > >>>>>>> RSpec works as expected (187 examples, 0 failures, 10 pending) > >>>>>>> but I > >>>>>>> am missing the RCov report. > >>>>>>> > >>>>>> > >>>>>> In your first email you asked: Why is rcov started at the end of > >>>>>> the > >>>>>> test run? > >>>>>> I got confused about what you mean by "test run" (that usually > >>>>>> mean > >>>>>> Test::Unit run - and you do have Test::Unit output). > >>>>>> > >>>>>> Are you trying to figure out what order things are happening in, > >>>>>> or > >>>>>> are you trying to figure out why you''re not getting an RCov > >>>>>> report? > >>>>>> > >>>>>> Aslak > >>>>>> > >>>>>>> > >>>>>>> Am 17.03.2008 um 15:43 schrieb aslak hellesoy: > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>>> On Mon, Mar 17, 2008 at 1:27 PM, Tobias Torkler <tobias.torkler at meco.de > >>>>>>>>> wrote: > >>>>>>>>> Hi, > >>>>>>>>> > >>>>>>>>> I am using JRuby (trunk) and wrote a bunch of specifications > >>>>>>>>> for my > >>>>>>>>> code. Everything works fine so far. > >>>>>>>>> Now I am trying to integrate RCov in my test run. I have > >>>>>>>>> installed > >>>>>>>>> RCov without the C extensions. I tried it with a simple script > >>>>>>>>> and it > >>>>>>>>> worked (pretty slow, but it doesn?t matter). > >>>>>>>>> But when I add the rcov options to my Rake task, RCov is not > >>>>>>>>> invoke > >>>>>>>>> properly! > >>>>>>>>> > >>>>>>>>> Rakefile: > >>>>>>>>> Spec::Rake::SpecTask.new(''specs'') do |t| > >>>>>>>>> t.spec_files = FileList[''spec/**/*.rb''] > >>>>>>>>> t.rcov = true > >>>>>>>>> t.rcov_opts = [''--exclude'', ''spec''] > >>>>>>>>> t.verbose = true > >>>>>>>>> end > >>>>>>>>> > >>>>>>>>> Output: > >>>>>>>>> ... > >>>>>>>>> Finished in 11.376 seconds > >>>>>>>>> > >>>>>>>>> 187 examples, 0 failures, 10 pending > >>>>>>>>> Loaded suite /Users/tobias/bin/JRuby.framework/Current/bin/ > >>>>>>>>> rcov > >>>>>>>>> Started > >>>>>>>>> > >>>>>>>>> Finished in 0.0080 seconds. > >>>>>>>>> > >>>>>>>>> 0 tests, 0 assertions, 0 failures, 0 errors > >>>>>>>>> > >>>>>>>> > >>>>>>>> This is Test::Unit output > >>>>>>>> > >>>>>>>>> Why is rcov started at the end of the test run? > >>>>>>>> > >>>>>>>> Did you mean: Why is Test::Unit started at the end of the RSpec > >>>>>>>> run? > >>>>>>>> > >>>>>>>> I''m not sure exactly what you''re asking. > >>>>>>>> > >>>>>>>> Aslak > >>>>>>>> > >>>>>>>>> _______________________________________________ > >>>>>>>>> rspec-users mailing list > >>>>>>>>> rspec-users at rubyforge.org > >>>>>>>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>>>>>>> > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> rspec-users mailing list > >>>>>>> rspec-users at rubyforge.org > >>>>>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>>>>> > >>>>> > >>>>> _______________________________________________ > >>>>> rspec-users mailing list > >>>>> rspec-users at rubyforge.org > >>>>> http://rubyforge.org/mailman/listinfo/rspec-users > >>>>> > >>> > >>> _______________________________________________ > >>> rspec-users mailing list > >>> rspec-users at rubyforge.org > >>> http://rubyforge.org/mailman/listinfo/rspec-users > >>> > > > > _______________________________________________ > > rspec-users mailing list > > rspec-users at rubyforge.org > > http://rubyforge.org/mailman/listinfo/rspec-users > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >