Alan Pevec
2008-Dec-16 02:41 UTC
[Ovirt-devel] REPOST#2 standalone and autoinstall mode fixes
[PATCH node] ovirt-config-storage autoinstall fixes [PATCH node] ovirt-config-boot - minimal installer for livecd image to local disk [PATCH node] refactor Node local disk usage
Alan Pevec
2008-Dec-16 02:41 UTC
[Ovirt-devel] [PATCH node] ovirt-config-storage autoinstall fixes
Use the drive selected by ovirt_init boot parameter
ovirt_init=usb|scsi
to select a local disk drive to create oVirt LVM volumes
If ovirt_vol parameter is missing, default volume sizes are used:
BOOT 50MB
SWAP 2 * RAM size
ROOT 256MB
CONFIG 5MB
LOGGING 256MB
DATA rest of the disk
equivalent is ovirt_vol=50::256:5:256
Cleanup lvms on selected disk
Signed-off-by: Alan Pevec <apevec at redhat.com>
---
scripts/ovirt-config-storage | 64 +++++++++++++++++++++++++++---------------
1 files changed, 41 insertions(+), 23 deletions(-)
diff --git a/scripts/ovirt-config-storage b/scripts/ovirt-config-storage
index 5b1f7fc..89ba175 100755
--- a/scripts/ovirt-config-storage
+++ b/scripts/ovirt-config-storage
@@ -28,13 +28,25 @@ check_partition_sizes()
# or just let the mke2fs failure suffice.
}
-# Find a usable/selected storage device along with its size in bytes.
+get_selected_drive_size()
+{
+ local udi=$(hal-find-by-property --key block.device --string $DRIVE)
+ if [ -z "$udi" ]; then
+ warn "ERROR: selected storage device is not available"
+ return 1
+ fi
+ size=$(hal-get-property --udi "$udi" --key storage.size)
+ SPACE=$(echo "scale=0; $size / (1024 * 1024)" | bc -l)
+ echo "selected device: $DRIVE ($SPACE MB)"
+}
+
+# Find a usable/selected storage device.
# If there are none, give a diagnostic and return nonzero.
# If there is just one, e.g., /dev/sda, treat it as selected (see below).
# and return 0. If there are two or more, make the user select one
# or decline. Upon decline, return nonzero. Otherwise, print the
-# selected name, a space, and its size, then return 0.
-# Sample output: "/dev/sda 320072933376"
+# selected name, then return 0.
+# Sample output: /dev/sda
get_dev_name()
{
local udi_list=$(hal-find-by-capability --capability storage)
@@ -58,20 +70,16 @@ get_dev_name()
*) warn "block device name $block_dev doesn't start with
'/';" \
" skipping"; continue;;
esac
- size=$(hal-get-property --udi "$d" --key storage.size)
test -z "$devices" \
&& devices=$block_dev \
|| devices="$devices $block_dev"
- test -z "$sizes" \
- && sizes=$size \
- || sizes="$sizes $size"
done
# If there's only one device, use it.
case $devices in
'') warn "ERROR: found no usable block device";
return 1;;
*' '*) ;; # found more than one
- *) echo "$devices $sizes"; return 0;; # just one
+ *) echo "$devices"; return 0;; # just one
esac
# There are two or more; make the user choose.
@@ -80,10 +88,7 @@ get_dev_name()
do
test "$device" = Abort && return 1
test -z "$device" && continue
- # $REPLY is the selected number;
- # use that to map to the corresponding size.
- size=$(echo "$sizes"|cut -d' ' -f "$REPLY")
- echo "$device $size"
+ echo "$device"
return 0
done
}
@@ -91,13 +96,8 @@ get_dev_name()
do_configure()
{
local name_and_size
- name_and_size=$(get_dev_name) || exit 1
- set -- $name_and_size
- DRIVE=$1
- local n_bytes=$2
-
- SPACE=$(echo "scale=0; $n_bytes / (1024 * 1024)" | bc -l)
- echo "selected device: $DRIVE ($SPACE MB)"
+ DRIVE=$(get_dev_name) || exit 1
+ get_selected_drive_size
for i in boot swap root config logging ; do
uc=$(echo $i|tr '[[:lower:]]' '[[:upper:]]')
@@ -145,6 +145,22 @@ The local disk will be repartitioned as follows:
EOF
}
+# cleanup lvms on selected disk
+# - remove mounted filesystems
+# - remove LVM volumes and groups
+wipe_lvm_on_disk()
+{
+ for vg in $(pvdisplay -c $DRIVE* 2>/dev/null|awk -F: '{print
$2}'|sort -u); do
+ for d in $(grep $vg /proc/mounts|awk '{print $2}'); do
+ umount $d
+ done
+ for lv in $(lvdisplay -c $vg|awk -F: '{print $1}'); do
+ lvremove -f $lv
+ done
+ vgremove -f $vg
+ done
+}
+
perform_partitioning()
{
if [ -z "$DRIVE" ]; then
@@ -156,8 +172,7 @@ perform_partitioning()
LOG=/var/log/ovirt-partition.log
{
- vgroups=$(vgdisplay -C | awk '{ print $1" "; }')
- vgremove -f $vgroups
+ wipe_lvm_on_disk
# Exit upon any failure.
set -e
@@ -269,10 +284,13 @@ ROOT_SIZE=${OVIRT_VOL_ROOT_SIZE:-$default_root_size}
CONFIG_SIZE=${OVIRT_VOL_CONFIG_SIZE:-$default_config_size}
LOGGING_SIZE=${OVIRT_VOL_LOGGING_SIZE:-$default_logging_size}
+if [ -n "$OVIRT_INIT" ]; then
+ # if present, use the drive selected with 'ovirt_init' boot
parameter
+ DRIVE=$OVIRT_INIT
+ get_selected_drive_size
+fi
if [ "$1" == "AUTO" ]; then
- # In "AUTO" mode, OVIRT_INIT should be defined in the
environment.
- DRIVE=$OVIRT_INIT
check_partition_sizes
printf "Partitioning hard disk..."
perform_partitioning
--
1.6.0.4
Alan Pevec
2008-Dec-16 02:41 UTC
[Ovirt-devel] [PATCH node] ovirt-config-boot - minimal installer for livecd image to local disk
LiveOS folder is copied to /dev/HostVG/Root LVM volume,
kernel,initrd and GRUB are installed to /dev/HostVG/Boot partition.
livecd initrd is modified on the fly to support LVM,
which is not included in initramfs produced by mayflower/mkliveinitrd
Example usage:
ovirt-config-boot "$disk" /live "$bootparam1 $bootparam2"
caller is responsible to issue reboot
Signed-off-by: Alan Pevec <apevec at redhat.com>
---
Makefile.am | 1 +
ovirt-node.spec.in | 5 ++
scripts/ovirt-config-boot | 122 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 128 insertions(+), 0 deletions(-)
create mode 100755 scripts/ovirt-config-boot
diff --git a/Makefile.am b/Makefile.am
index a47beaa..09ba56b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -27,6 +27,7 @@ EXTRA_DIST = \
scripts/collectd.conf.in \
scripts/ovirt \
scripts/ovirt-awake \
+ scripts/ovirt-config-boot \
scripts/ovirt-config-logging \
scripts/ovirt-config-networking \
scripts/ovirt-config-password \
diff --git a/ovirt-node.spec.in b/ovirt-node.spec.in
index 50b2d18..c634a58 100644
--- a/ovirt-node.spec.in
+++ b/ovirt-node.spec.in
@@ -36,6 +36,7 @@ Requires: bind-utils
# qemu-img RPM.
Requires: qemu-img
Requires: nc
+Requires: grub
Requires: /usr/sbin/crond
ExclusiveArch: %{ix86} x86_64
@@ -112,6 +113,7 @@ cd -
%{__install} -d -m0755 %{buildroot}%{_sysconfdir}/logrotate.d
%{__install} -p -m0755 scripts/ovirt-awake %{buildroot}%{_sbindir}
+%{__install} -p -m0755 scripts/ovirt-config-boot %{buildroot}%{_sbindir}
%{__install} -p -m0755 scripts/ovirt-config-logging %{buildroot}%{_sbindir}
%{__install} -p -m0755 scripts/ovirt-config-networking %{buildroot}%{_sbindir}
%{__install} -p -m0755 scripts/ovirt-config-password %{buildroot}%{_sbindir}
@@ -203,6 +205,8 @@ fi
%files stateless
%defattr(-,root,root,0755)
+%{_sbindir}/ovirt-awake
+%{_sbindir}/ovirt-config-boot
%{_sbindir}/ovirt-config-logging
%{_sbindir}/ovirt-config-networking
%{_sbindir}/ovirt-config-password
@@ -243,6 +247,7 @@ fi
* Thu Dec 11 2008 Perry Myers <pmyers at redhat.com> - 0.96
- Subpackage stateful/stateless to separate out functionality for
embedded Node and Node running as part of already installed OS
+- ovirt-config-* setup scripts for standalone mode
* Thu Sep 11 2008 Chris Lalancette <clalance at redhat.com> - 0.92 0.7
- Add the ovirt-install- and ovirt-uninstall-node scripts, and refactor
diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot
new file mode 100755
index 0000000..ad0aeb1
--- /dev/null
+++ b/scripts/ovirt-config-boot
@@ -0,0 +1,122 @@
+#!/bin/bash
+#
+# ovirt-config-boot - configure local boot disk partition
+
+# SYNOPSIS
+# ovirt-config-boot livecd_path bootparams
+#
+# boot_disk - boot disk device e.g. /dev/sda
+#
+# livecd_path - where livecd media is mounted,
+# parent of LiveOS and isolinux folders
+#
+# bootparams - extra boot parameters like console=...
+#
+
+# Source functions library
+. /etc/init.d/functions
+. /etc/init.d/ovirt-functions
+
+
+# local_boot_install livecd_path bootparams
+# livecd_path -livecd media
+# bootparams - extra boot parameters like console=...
+#
+# copy oVirt Node image to the local LVM /dev/HostVG
+ovirt_boot_setup() {
+ local disk=$1
+ local live=$2
+ local bootparams=$3
+ printf "installing oVirt Node image ... "
+ mount_boot
+ mount_liveos
+ # install oVirt Node image for local boot
+ if [ -e "$live/syslinux" ]; then
+ syslinux=syslinux
+ elif [ -e "$live/isolinux" ]; then
+ syslinux=isolinux
+ else
+ syslinux+ fi
+ rm -rf /boot/grub
+ rm -rf /liveos/LiveOS
+ mkdir -p /boot/grub
+ mkdir -p /liveos/LiveOS
+ cp -p $live/LiveOS/squashfs.img /liveos/LiveOS \
+ && cp -p $live/$syslinux/vmlinuz0 /boot
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ printf "image copy failed\n"
+ return $rc
+ fi
+ # append LVM support to the livecd initramfs
+ tmpdir=$(mktemp -d)
+ cd $tmpdir
+ gzip -dc $live/$syslinux/initrd0.img |
+ cpio -id init sbin/real-init 2> /dev/null
+ init_script=init
+ if [ -e sbin/real-init ]; then
+ # Fedora 10 mkliveinitrd
+ init_script=sbin/real-init
+ fi
+ sed -i '/^\/sbin\/udev.*settle/ a \echo Scanning logical volumes\
+lvm vgscan --ignorelockingfailure\
+echo Activating logical volumes\
+lvm vgchange -ay --ignorelockingfailure HostVG \
+' $init_script
+ # fix emergency shell
+ sed -i 's/^ bash$/ bash < \/dev\/console/' $init_script
+ # do not fail if device node already exists
+ sed -i 's/mknod.*$/& || :/' $init_script
+ mkdir -p bin
+ bit+ if [ -e /lib64 ]; then
+ bit=64
+ fi
+ mkdir -p lib$bit
+ if [ -e /sbin/lvm.static ]; then
+ cp /sbin/lvm.static bin/lvm
+ else
+ cp /sbin/lvm bin
+ # lvm is not static in Fedora
+ cp /lib$bit/libreadline.so.5 /lib$bit/libncurses.so.5 lib$bit
+ fi
+ find $init_script bin/lvm lib$bit -type f |
+ cpio -H newc --quiet -o |
+ gzip -9 |
+ cat $live/$syslinux/initrd0.img - > /boot/initrd0.img
+
+ cat > /boot/grub/grub.conf << EOF
+default=0
+timeout=5
+hiddenmenu
+title oVirt Node
+ root (hd0,0)
+ kernel /vmlinuz0 ro root=/dev/HostVG/Root roottypefs=ext3 liveimg
$bootparams
+ initrd /initrd0.img
+EOF
+ echo "(hd0) $disk" > /boot/grub/device.map
+ ( cd /usr/share/grub/*; cp -p stage? e2fs_stage1_5 /boot/grub )
+ grub --device-map=/boot/grub/device.map > /dev/null <<EOF
+root (hd0,0)
+setup --prefix=/grub (hd0)
+EOF
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ printf "boot loader install failed\n"
+ return $rc
+ fi
+
+ # avoid reboot loops using Cobbler PXE only once
+ # Cobbler XMLRPC post-install trigger (XXX is there cobbler SRV record?):
+ # wget
"http://192.168.50.2/cblr/svc/op/trig/mode/post/system/$(hostname)"
+ # -O /dev/null
+ sync; sync; sync
+ # caller decides when to reboot
+ rm -rf $tmpdir
+ printf "done.\n"
+}
+
+
+ovirt_boot_setup "$1" "$2" "$3"
+
--
1.6.0.4
Alan Pevec
2008-Dec-16 02:41 UTC
[Ovirt-devel] [PATCH node] refactor Node local disk usage
use LVM partitions created by o-c-storage
use file bindmounts for persisted configs
use optional /config from livecd image
support for old and new udev versions
add BOOTIF=link|eth* support
Signed-off-by: Alan Pevec <apevec at redhat.com>
---
scripts/ovirt | 22 ---
scripts/ovirt-early | 391 ++++++++++++++++-------------------------------
scripts/ovirt-firstboot | 41 +++++-
scripts/ovirt-functions | 204 +++++++++++++++++++------
4 files changed, 329 insertions(+), 329 deletions(-)
mode change 100644 => 100755 scripts/ovirt
mode change 100644 => 100755 scripts/ovirt-post
diff --git a/scripts/ovirt b/scripts/ovirt
old mode 100644
new mode 100755
index 81733a5..e2c406b
--- a/scripts/ovirt
+++ b/scripts/ovirt
@@ -11,28 +11,6 @@
. /etc/init.d/ovirt-functions
start() {
- # retrieve config from local OVIRT partition if available
- ovirt=$(mktemp -d)
- ovirt_mount $ovirt
- # /config on OVIRT partition contains persisted /etc files
- cfg=$ovirt/config
- if [ -d $cfg/etc ]; then
- cp -rv $cfg/etc/* /etc
- restorecon -r /etc
- fi
- # and optional Augeas augtool script
- aug=$cfg/config.aug
- if [ -f $aug ]; then
- tmpaug=$(mktemp)
- cp $aug $tmpaug
- echo "save" >> $tmpaug
- augtool < $tmpaug > /dev/null 2>&1
- if [ $? -eq 0 ]; then
- printf "$aug applied."
- fi
- fi
- umount $ovirt && rmdir $ovirt
-
if is_standalone; then
exit 0
fi
diff --git a/scripts/ovirt-early b/scripts/ovirt-early
index c09a987..8bf8928 100755
--- a/scripts/ovirt-early
+++ b/scripts/ovirt-early
@@ -10,8 +10,6 @@
. /etc/init.d/functions
. /etc/init.d/ovirt-functions
-# size of the oVirt partition in megabytes
-OVIRT_SIZE=64
BONDING_MODCONF_FILE=/etc/modprobe.d/bonding
AUGTOOL_CONFIG=/var/tmp/augtool-config
@@ -48,12 +46,15 @@ configure_from_network() {
ovirt-process-config $cfgdb $BONDING_MODCONF_FILE
$AUGTOOL_CONFIG
if [ -f $AUGTOOL_CONFIG ]; then
echo "Loading remote config"
+ # avoid bindmount issues with augeas
+ umount_config
/etc/sysconfig/network-scripts/ifcfg-eth*
augtool < $AUGTOOL_CONFIG \
&& echo "Remote config
applied" \
|| echo "Failed applying remote
config"
fi
if ls /etc/sysconfig/network-scripts/ifcfg-eth* >
/dev/null 2>&1; then
echo "Network interfaces created from remote
config"
+ ovirt_store_config
/etc/sysconfig/network-scripts/ifcfg-eth*
return
else
echo "Remote config contained no network
interfaces"
@@ -61,6 +62,7 @@ configure_from_network() {
else
echo "Failed to retrieve configuration
bundle"
fi
+ rm $cfgdb
fi
fi
fi
@@ -80,14 +82,29 @@ configure_from_network() {
echo "Default config applied"
}
-# find_disk $bus $serial $live_disk
+# $(get_live_disk)
+# livecd boot disk
+get_live_disk() {
+ local live_dev=/dev/live
+ if [ ! -e $live_dev ]; then
+ # PXE boot
+ live_dev=/dev/loop0
+ live_disk+ else
+ live_part=$(readlink -e $live_dev)
+ live_disk=$(basename $(dirname $(udev_info $live_part path)))
+ fi
+ echo $live_disk
+}
+
+# find_disk $bus $serial
find_disk() {
local bus=$1
local serial=$2
- local live=$3
+ local live=$(get_live_disk)
for d in /dev/disk/by-id/{scsi,usb}*; do
ID_FS_USAGE- eval $(udevinfo --query env --name $d)
+ eval $(udev_info $d env)
# ID_FS_USAGE is set for partitions
if [ -z "$ID_FS_USAGE" -a "$ID_BUS" =
"$bus" ]; then
if [ -z "$serial" -o "$ID_SERIAL" =
"$serial" ]; then
@@ -104,216 +121,10 @@ find_disk() {
return 1
}
-# TODO move to ovirt-config-storage
-# local_install $local_boot $local_disk $bootparams
-# local_boot - 1=install LiveOS and boot loader
-# 0=initialize oVirt partition only
-# local_disk - local disk to hold the oVirt partition
-# =usb|scsi[:serial#]
-# bootparams - extra boot parameters like console-#
-# oVirt partition is a local primary ext2 partition, labeled OVIRT
-# content:
-# /config - local oVirt configuration (ktab, local admin password)
-# /boot - boot loader, kernel and initramfs
-# /LiveOS - oVirt Node compressed livecd image
-
-local_install() {
- local local_boot=$1
- local local_disk=$2
- local bootparams=$3
- local disk
- local part
- local live_part
- local live_disk
- local live_dev=/dev/live
- if [ ! -e $live_dev ]; then
- # PXE boot
- live_dev=/dev/loop0
- live_part=$live_dev
- live_disk- else
- live_part=$(readlink -e $live_dev)
- live_disk=${live_disk%[1-9]}
- fi
- local ovirt_part=$(readlink -e /dev/disk/by-label/$OVIRT_LABEL)
- local ovirt_disk=${ovirt_part%[1-9]}
- if [ "$ovirt_disk" = "$ovirt_part" ]; then
- ovirt_disk- fi
- if [ -z "$local_disk" ]; then
- if [ -z "$ovirt_disk" ]; then
- return 1
- fi
- # ovirt_init not specified, use pre-labeled oVirt partition
- mode=update
- disk=$ovirt_disk
- part=$ovirt_part
- else
- case "$local_disk" in
- =)
- # empty ovirt_init, use current live image device
- mode=update
- disk=$live_disk
- part=$live_part
- ;;
- =scsi*)
- bus=scsi
- serial=${local_disk#=scsi:}
- mode=install
- ;;
- =usb*)
- bus=usb
- serial=${local_disk#=usb:}
- mode=install
- ;;
- *)
- return 1
- ;;
- esac
- if [ $mode = "install" ]; then
- if [ "$serial" = "=$bus" ]; then
- serial- fi
- disk=$(find_disk $bus $serial $live_disk)
- rc=$?
- if [ $rc -ne 0 ]; then
- echo "local disk '$local_disk' not available"
- return 1
- fi
- if [ -n "$ovirt_disk" ]; then
- if [ "$disk" = "$ovirt_disk" ]; then
- # local disk contains oVirt partition, select it for update
- # TODO force reinstall option
- mode=update
- part=$ovirt_part
- else
- # remove label from oVirt partition, there can be only one
- e2label $ovirt_part ""
- fi
- fi
- fi
- if [ "$mode" = "install" ]; then
- printf "installing $disk..." | tee /dev/console
- dd if=/dev/zero bs=4096 count=1 of=$disk \
- && parted -s $disk mklabel msdos \
- && parted -s $disk mkpart primary ext2 0.0 $OVIRT_SIZE \
- && partprobe -s $disk
- if [ $? -ne 0 ]; then
- echo "$disk partition creation failed"; return 1
- fi
- part=${disk}1
- udevsettle
- mkfs.ext2 -L $OVIRT_LABEL $part \
- && tune2fs -c0 -i0 $part
- if [ $? -ne 0 ]; then
- echo "$disk ext2 creation failed"; return 1
- fi
- # update by-label link manually, mkfs won't trigger udev
- mkdir -p /dev/disk/by-label
- ln -sf $part /dev/disk/by-label/$OVIRT_LABEL
- fi
- fi
-
- if [ "$mode" = "update" ]; then
- printf "updating $disk..." | tee /dev/console
- fi
- ovirt=$(mktemp -d)
- if [ "$part" = "$live_part" ]; then
- # ovirt_init w/o local disk specified
- # setup /config on live disk, if writeable
- # TODO mlabel/e2label (check fs2 type or just blindly try?)
- mount -r $part $ovirt && mount -o remount,rw $ovirt \
- && mkdir -p $ovirt/config
- umount $ovirt && rmdir $ovirt
- return 0
- fi
- live=$(mktemp -d)
- mount -r $live_dev $live
- if [ $? -ne 0 ]; then
- echo "source image mount failed"
- rmdir $live
- return 1
- fi
- mount $part $ovirt
- if [ $? -ne 0 ]; then
- echo "local disk mount failed"
- umount $live && rmdir $live
- rmdir $ovirt
- return 1
- fi
- mkdir -p $ovirt/config
- # update local config using the one embedded in livecd image
- # TODO admin tool for adding /config into livecd image
- if [ -d $live/config ]; then
- cp -rv $live/config/* $ovirt/config \
- || echo "config copy failed"
- fi
-
- if [ $local_boot = 0 ]; then
- # config update only, cleanup and continue booting
- umount $ovirt && rmdir $ovirt
- umount $live && rmdir $live
- else
- # install oVirt Node image for local boot
- if [ -e "$live/syslinux" ]; then
- syslinux=syslinux
- elif [ -e "$live/isolinux" ]; then
- syslinux=isolinux
- else
- syslinux- fi
- rm -rf $ovirt/boot
- rm -rf $ovirt/LiveOS
- mkdir -p $ovirt/boot/grub
- mkdir -p $ovirt/LiveOS
- cp -p $live/LiveOS/squashfs.img $ovirt/LiveOS \
- && cp -p $live/$syslinux/initrd0.img $ovirt/boot \
- && cp -p $live/$syslinux/vmlinuz0 $ovirt/boot
- if [ $? -ne 0 ]; then
- echo "image copy failed"
- umount $ovirt && rmdir $ovirt
- umount $live && rmdir $live
- return 1
- fi
- part_num=$(( ${part#$disk} - 1 ))
- cat > $ovirt/boot/grub/grub.conf << EOF
-default=0
-timeout=2
-hiddenmenu
-title oVirt Node
- root (hd0,$part_num)
- kernel /boot/vmlinuz0 ro root=LABEL=OVIRT roottypefs=ext2 liveimg
$bootparams
- initrd /boot/initrd0.img
-EOF
- grub-install --root-directory=$ovirt $disk >&2
- if [ $? -ne 0 ]; then
- echo "boot loader install failed"
- umount $ovirt && rmdir $ovirt
- umount $live && rmdir $live
- return 1
- fi
- # remove 1.5 stages we don't need
- find $ovirt/boot/grub -name '*_stage1_5' ! -name e2fs_stage1_5 \
- -exec rm {} \;
- umount $ovirt && rmdir $ovirt
- umount $live && rmdir $live
- # FIXME avoid reboot loops
- # temp. workaround: sync and wait
- sync; sync; sync
- printf "oVirt local installation finished, press Enter to
reboot." \
- > /dev/console
- read key
- if [ "$key" = "debug" ]; then
- sh > /dev/console 2>&1
- fi
- reboot
- fi
-}
start() {
# oVirt boot parameters
- # BOOTIF=<MAC> (appended by pxelinux)
+ # BOOTIF=link|eth*|<MAC> (appended by pxelinux)
# ovirt_init=usb|scsi[:serial#]
# ovirt_vol=BOOT_MB:SWAP_MB:ROOT_MB:CONFIG_MB:LOGGING_MB
# ovirt_local_boot
@@ -324,11 +135,14 @@ start() {
# syslog=server[:port]
# TBD logrotate maxsize
- # BOOTIF=<MAC> (appended by pxelinux)
+ # BOOTIF=link|eth*|<MAC> (appended by pxelinux)
# network boot interface is assumed to be on management network where
# oVirt Server is reachable
- # IPAPPEND 2 in pxelinux.cfg appends MAC address of the booting node
- # e.g. BOOTIF=01-00-16-3e-12-34-57
+ # BOOTIF=<MAC> e.g. BOOTIF=01-00-16-3e-12-34-57
+ # PXELINUX option IPAPPEND 2 in pxelinux.cfg appends MAC address
+ # of the booting node
+ # BOOTIF=link - take first eth for which ethtool reports link
+ # BOOTIF=eth* e.g. BOOTIF=eth0 - use given interface
bootif
# ovirt_init=usb|scsi[:serial#]
@@ -337,23 +151,23 @@ start() {
# serial# - select exact disk using serial number, as reported by
# udev ID_SERIAL
# e.g. ovirt_init=usb:Generic_STORAGE_DEVICE_0000145418-0:0
- ovirt_init+ init
# ovirt_vol=BOOT_MB:SWAP_MB:ROOT_MB:CONFIG_MB:LOGGING_MB
# local partition sizes in GB
- ovirt_vol_boot- ovirt_vol_swap- ovirt_vol_root- ovirt_vol_config-
ovirt_vol_logging+ vol_boot_size+ vol_swap_size+ vol_root_size+
vol_config_size+ vol_logging_size
# ovirt_local_boot
# install/update oVirt Node image on the local installation target disk
- ovirt_local_boot=0
+ local_boot=0
# ovirt_standalone
# force oVirt Node standalone mode
- ovirt_standalone=0
+ standalone=0
# pxelinux format:
ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
# anaconda format: ip=<client-ip> netmask=<netmask>
gateway=<gw-ip>
@@ -376,25 +190,65 @@ start() {
for i in $(cat /proc/cmdline); do
case $i in
- BOOTIF=??-??-??-??-??-??-??)
- i=${i#BOOTIF=??-}
- bootif=$(grep -il $(echo $i|sed 's/-/:/g')
/sys/class/net/eth*/address|rev|cut -d/ -f2|rev)
+ BOOTIF=*)
+ i=${i#BOOTIF=}
+ case "$i" in
+ eth*)
+ bootif=$i
+ ;;
+ link)
+ for eth in $(cd /sys/class/net; echo eth*); do
+ if ethtool $eth 2>/dev/null|grep -q "Link detected:
yes"
+ then
+ bootif=$eth
+ break
+ fi
+ done
+ ;;
+ ??-??-??-??-??-??-??)
+ i=${i#??-}
+ bootif=$(grep -il $(echo $i|sed 's/-/:/g')
/sys/class/net/eth*/address|rev|cut -d/ -f2|rev)
+ ;;
+ esac
;;
ovirt_init*)
- ovirt_init=${i#ovirt_init}
- if [ -z "$ovirt_init" ]; then
- ovirt_init='='
+ i=${i#ovirt_init}
+ if [ -n "$i" ]; then
+ # resolve to disk device
+ case "$i" in
+ =scsi*)
+ bus=scsi
+ i=${i#=scsi}
+ serial=${i#:}
+ ;;
+ =usb*)
+ bus=usb
+ i=${i#=usb}
+ serial=${i#:}
+ ;;
+ *)
+ bus+ serial+ ;;
+ esac
+ if [ -n "$bus" ]; then
+ init=$(find_disk $bus $serial)
+ fi
+ else
+ # 'ovirt_init' without value: grab first disk
+ init=/dev/?da
fi
;;
ovirt_vol=*)
i=${i#ovirt_vol=}
- eval $(printf $i|awk -F: '{print "ovirt_vol_boot="$1;
ovirt_vol_swap="$2; print "ovirt_vol_root="$3; print
"ovirt_vol_config="$4; print "ovirt_vol_logging="$5;}')
+ eval $(printf $i|awk -F: '{print "vol_boot_size="$1;
print "vol_swap_size="$2; print "vol_root_size="$3; print
"vol_config_size="$4; print "vol_logging_size="$5;}')
;;
ovirt_local_boot*)
- ovirt_local_boot=1
+ local_boot=1
;;
ovirt_standalone*)
- ovirt_standalone=1
+ standalone=1
+ bootparams="$bootparams $i"
;;
ip=*)
i=${i#ip=}
@@ -418,41 +272,63 @@ start() {
;;
esac
done
- # save boot parameters as defaults for ovirt-config-*
+
if [ -z "$ip_netmask" ]; then
ip_netmask=$netmask
fi
if [ -z "$ip_gateway" ]; then
ip_gateway=$gateway
fi
+ # save boot parameters as defaults for ovirt-config-*
+ params="bootif init vol_boot_size vol_swap_size vol_root_size
vol_config_size vol_logging_size local_boot standalone ip_address ip_netmask
ip_gateway ipv6 syslog_server syslog_port bootparams"
+ mount_config
+ if [ -e $OVIRT_DEFAULTS ]; then
+ echo "update ovirt defaults"
+ tmpaug=$(mktemp)
+ for p in $params; do
+ PARAM=$(uc $p)
+ value=$(ptr $p)
+ echo "set /files$OVIRT_DEFAULTS/OVIRT_$PARAM
'\"$value\"'" \
+ >> $tmpaug
+ done
+ echo "save" >> $tmpaug
+ # augtool on bindmounted files fails
+ umount_config $OVIRT_DEFAULTS
+ augtool < $tmpaug > /dev/null
+ ovirt_store_config $OVIRT_DEFAULTS
+ rm $tmpaug
+ else
+ echo "initial startup"
+ # dump all ovirt bootparams
+ mkdir -p $(dirname $OVIRT_DEFAULTS)
+ echo > $OVIRT_DEFAULTS
+ for p in $params; do
+ PARAM=$(uc $p)
+ echo "OVIRT_$PARAM='$(ptr $p)'" >>
$OVIRT_DEFAULTS
+ done
+ ovirt_store_config $OVIRT_DEFAULTS
+ fi
- cat > $OVIRT_DEFAULTS <<EOF
-# configuration defaults from oVirt Node boot parameters
-OVIRT_BOOTIF=$bootif
-OVIRT_INIT=$ovirt_init
-OVIRT_VOL_BOOT_SIZE=$ovirt_vol_boot
-OVIRT_VOL_SWAP_SIZE=$ovirt_vol_swap
-OVIRT_VOL_ROOT_SIZE=$ovirt_vol_root
-OVIRT_VOL_CONFIG_SIZE=$ovirt_vol_config
-OVIRT_VOL_LOGGING_SIZE=$ovirt_vol_logging
-OVIRT_LOCAL_BOOT=$ovirt_local_boot
-OVIRT_STANDALONE=$ovirt_standalone
-OVIRT_IP_ADDRESS=$ip_address
-OVIRT_IP_NETMASK=$ip_netmask
-OVIRT_IP_GATEWAY=$ip_gateway
-OVIRT_IPV6=$ipv6
-OVIRT_SYSLOG_SERVER=$syslog_server
-OVIRT_SYSLOG_PORT=$syslog_port
-EOF
-
- set -x
- local_install "$ovirt_local_boot" "$ovirt_init"
"$bootparams"
- set +x
- if [ $ovirt_standalone = 0 ]; then
+ if [ $standalone = 0 ]; then
configure_from_network $bootif
+ if [ -n "$init" ]; then
+ ovirt-config-storage AUTO
+ # initial configuration storage, after /config creation
+ ovirt_store_config \
+ /etc/sysconfig/network-scripts/ifcfg-* \
+ $BONDING_MODCONF_FILE
+ if [ $local_boot = 1 ]; then
+ # local disk installation for managed mode
+ mount_live
+ ovirt-config-boot $init /live "$bootparams"
+ reboot
+ fi
+ fi
fi
+}
-# BEGIN - move to ovirt-config-storage
+scan_for_swap() {
+ # swap partition activation
# find all of the partitions on the system
# get the system pagesize
@@ -478,7 +354,6 @@ EOF
swapon $device
fi
done
-# END - move to ovirt-config-storage
}
case "$1" in
diff --git a/scripts/ovirt-firstboot b/scripts/ovirt-firstboot
index 0f0c206..87cf0a2 100755
--- a/scripts/ovirt-firstboot
+++ b/scripts/ovirt-firstboot
@@ -27,19 +27,50 @@
. /etc/init.d/functions
. /etc/init.d/ovirt-functions
-start ()
+disable_firstboot ()
{
- plymouth --hide-splash
+ if mount_config; then
+ umount_config $OVIRT_DEFAULTS
+ augtool > /dev/null <<EOF
+set /files$OVIRT_DEFAULTS/OVIRT_FIRSTBOOT no
+save
+EOF
+ ovirt_store_config $OVIRT_DEFAULTS
+ fi
+}
+start ()
+{
if is_auto_install; then
ovirt-config-networking AUTO
ovirt-config-storage AUTO
ovirt-config-logging AUTO
- else
- ovirt-config-setup
+ if [ "$OVIRT_LOCAL_BOOT" = 1 ]; then
+ mount_live
+ ovirt-config-boot $OVIRT_INIT /live "$OVIRT_BOOTPARAMS"
+ disable_firstboot
+ reboot
+ fi
+ elif is_firstboot; then
+ plymouth --hide-splash
+
+ ovirt-config-setup < /dev/console
+
+ plymouth --show-splash
fi
- plymouth --show-splash
+ # persist config for standalone
+ ovirt_store_config \
+ /etc/sysconfig/network-scripts/ifcfg-* \
+ /etc/rsyslog.conf \
+ /etc/libvirt/libvirtd.conf \
+ /etc/sasl2/libvirt.conf \
+ /etc/libvirt/passwd.db \
+ /etc/passwd \
+ /etc/shadow \
+ /etc/ssh/ssh_host*_key*
+
+ disable_firstboot
}
case "$1" in
diff --git a/scripts/ovirt-functions b/scripts/ovirt-functions
index 271e173..e20bab9 100644
--- a/scripts/ovirt-functions
+++ b/scripts/ovirt-functions
@@ -9,34 +9,44 @@ OVIRT_DEFAULTS=/etc/default/ovirt
if [ -f $OVIRT_DEFAULTS ]; then
. $OVIRT_DEFAULTS
fi
-# fallback defaults when sysconfig is empty
+# fallback when default is empty
OVIRT_STANDALONE=${OVIRT_STANDALONE:-0}
OVIRT_BACKUP_DIR=/var/lib/ovirt-backup
-# is_managed
# return 1 if oVirt Node is running in standalone mode
# return 0 if oVirt Node is managed by the oVirt Server
is_managed() {
return $OVIRT_STANDALONE
}
-# is_standalone = not is_managed
+# oVirt Node in standalone mode does not try to contact the oVirt Server
is_standalone() {
if is_managed; then return 1; else return 0; fi
}
-# is_auto_install
-# return 0 if all required oVirt boot parameters are present
+# perform automatic local disk installation
+# when at least following boot parameters are present:
+# for networking - OVIRT_BOOTIF, management NIC
+# if other ip bootparams are not specified, IPv4 DHCP is assumed
+# for storage - OVIRT_INIT, local disk to use
+# if ovirt_vol is not specified, default volume sizes are set
is_auto_install() {
- test -n "$OVIRT_BOOTIF" \
- -a -n "$OVIRT_OVIRT_STANDALONE" \
- -a -n "$OVIRT_INIT" \
- -a -n "$OVIRT_VOL_BOOT_SIZE" \
- -a -n "$OVIRT_VOL_SWAP_SIZE" \
- -a -n "$OVIRT_VOL_ROOT_SIZE" \
- -a -n "$OVIRT_VOL_CONFIG_SIZE" \
- -a -n "$OVIRT_VOL_LOGGING_SIZE"
+ if [ -n "$OVIRT_BOOTIF" -a -n "$OVIRT_INIT" ] ; then
+ return 0
+ else
+ return 1
+ fi
+}
+
+# was firstboot menu already shown?
+# state is stored in persistent config partition
+is_firstboot() {
+ if [ -z "$OVIRT_FIRSTBOOT" -o "$OVIRT_FIRSTBOOT" =
"1" ]; then
+ return 0
+ else
+ return 1
+ fi
}
# find_srv SERVICE PROTO
@@ -91,45 +101,151 @@ ovirt_setup_libvirtd() {
fi
}
-ovirt_mount() {
- if [ -e /dev/disk/by-label/$OVIRT_LABEL ]; then
- mount -r /dev/disk/by-label/$OVIRT_LABEL $1 \
- || mount /dev/disk/by-label/$OVIRT_LABEL $1
+md5() {
+ md5sum $1 2>/dev/null | (read MD5 filename; echo $MD5)
+}
+
+# return uppercase value
+uc() {
+ echo $(echo $1|tr '[[:lower:]]' '[[:upper:]]')
+}
+
+# return indirect value
+# non-bashism for ${!var}
+ptr() {
+ local v=$1
+ eval "v=\$$v"
+ echo $v
+}
+
+# mount livecd media
+# e.g. CD /dev/sr0, USB /dev/sda1,
+# PXE /dev/loop0 (loopback ISO)
+mount_live() {
+ if grep -q " /live " /proc/mounts; then
+ return 0
+ fi
+ local live_dev=/dev/live
+ if [ ! -e $live_dev ]; then
+ # PXE boot
+ live_dev=/dev/loop0
+ fi
+ mkdir -p /live
+ mount $live_dev /live
+}
+
+# mount boot partition
+# boot loader + kernel + initrd
+mount_boot() {
+ if grep -q " /boot " /proc/mounts; then
+ return 0
+ fi
+ mkdir -p /boot
+ mount /dev/disk/by-label/BOOT /boot
+}
+
+# mount liveos partition
+# LiveOS/
+mount_liveos() {
+ if grep -q " /liveos " /proc/mounts; then
+ return 0
+ fi
+ mkdir -p /liveos
+ mount /dev/HostVG/Root /liveos
+}
+
+# mount config partition
+# /config for persistance
+mount_config() {
+ if grep -q " /config " /proc/mounts; then
+ return 0
+ fi
+ mkdir -p /config
+ mount /dev/HostVG/Config /config
+ if grep -q " /config " /proc/mounts; then
+ # optional config embedded in the livecd image
+ if [ -e /live/config ]; then
+ cp -rv --update /live/config/* /config
+ fi
+ # bind mount all persisted configs to rootfs
+ for f in $(find /config -type f); do
+ target=${f#/config}
+ if grep -q " $target " /proc/mounts ; then
+ # skip if already bind-mounted
+ true
+ else
+ mkdir -p "$(dirname $target)"
+ touch "$target"
+ mount -n --bind $f "$target"
+ fi
+ done
else
- mount -r /dev/live $1 \
- || mount /dev/live $1
+ # /config is not available
+ return 1
fi
}
-md5() {
- md5sum $1 2>/dev/null | (read MD5 filename; echo $MD5)
+# unmount bindmounted config files
+# umount_config /etc/config /etc/config2 ...
+#
+# Use before running sed -i or augeas against the bindmounted file,
+# Otherwise save fails: https://fedorahosted.org/augeas/ticket/32
+# After file is replaced, call ovirt_store_config /etc/config /etc/config2 ...
+# to bindmount the config file again.
+#
+umount_config() {
+ if grep -q " /config " /proc/mounts; then
+ for f in "$@"; do
+ if grep -q " $f " /proc/mounts ; then
+ umount -n $f
+ # refresh rootfs copy
+ cp /config$f $f
+ fi
+ done
+ fi
}
-# persist configuration to /config on OVIRT partition
+# persist configuration to /config
# ovirt_store_config /etc/config /etc/config2 ...
+# copy to /config and bind-mount back
ovirt_store_config() {
- ovirt=$(mktemp -d)
- ovirt_mount $ovirt
- cfg=$ovirt/config
- rw=0
- printf "store config:"
- for f in "$@"; do
- # ignore non-/etc paths
- if [ $f != ${f#/etc/} ]; then
- # check if changed
- if [ "$(md5 $f)" != "$(md5 $cfg$f)" ]; then
- if [ $rw = 0 ]; then
- mount -o remount,rw $ovirt
- rw=1
- fi
- mkdir -p $cfg$(dirname $f)
- cp $f $cfg$f
- printf " $f"
- fi
- fi
- done
- echo
- umount $ovirt && rmdir $ovirt
+ if grep -q " /config " /proc/mounts; then
+ printf "storing to /config :"
+ for f in "$@"; do
+ printf " $f"
+ # skip if already bind-mounted
+ if grep -q " $f " /proc/mounts ; then
+ printf " already persisted\n"
+ else
+ mkdir -p /config$(dirname $f)
+ cp -a $f /config$f \
+ && mount -n --bind /config$f $f \
+ || printf " failed to persist\n"
+ fi
+ done
+ echo
+ else
+ printf "warning: persistent config storage not available\n"
+ fi
+}
+
+# compat function to handle different udev versions
+udev_info() {
+ local name=$1
+ local query=$2
+ local out
+
+ # old udev command with shortopts
+ out=$(udevinfo -n $name -q $query)
+ rc=$?
+ if [ $rc -ne 0 ]; then
+ out=$(udevadm info --name=$name --query=$query)
+ rc=$?
+ fi
+ if [ $rc -eq 0 ]; then
+ echo $out
+ fi
+ return $rc
}
backup_file() {
diff --git a/scripts/ovirt-post b/scripts/ovirt-post
old mode 100644
new mode 100755
--
1.6.0.4