Kai Li
2019-Dec-11 10:03 UTC
[Ocfs2-devel] [PATCH] ocfs2: call journal flush to mark journal as empty after journal recovery when mount
If journal is dirty when mount, it will be replayed but jbd2 sb
log tail cannot be updated to mark a new start because
journal->j_flag has already been set with JBD2_ABORT first
in journal_init_common. When a new transaction is committed, it
will be recored in block 1 first(journal->j_tail is set to 1 in
journal_reset).
If emergency restart happens again before journal super block is
updated unfortunately, the new recorded trans will not be replayed
in the next mount.
This exception happens when this lun is used by only one node. If it
is used by multi-nodes, other node will replay its journal and its
journal sb block will be updated after recovery.
To fix this problem, use jbd2_journal_flush to mark journal as empty as
ocfs2_replay_journal has done.
The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0
Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)
Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID: 00000000000000000000000000000000
1. 8257792 JBD2_FLAG_SAME_UUID
2. 619 JBD2_FLAG_SAME_UUID
3. 24772864 JBD2_FLAG_SAME_UUID
4. 8257802 JBD2_FLAG_SAME_UUID
5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
...
Block 7: Inode
Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809)
FS Generation: 2839773110 (0xa9437fb6)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x1) InlineData
User: 0 (root) Group: 0 (root) Size: 7
Links: 1 Clusters: 0
ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019
mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)
The following is jouranl recovery log when recovering the upper jbd2
journal when mount again.
syslog:
[ 2265.648622] ocfs2: File system on device (252,1) was not unmounted cleanly,
recovering it.
[ 2265.649695] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
[ 2265.650407] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
[ 2265.650409] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
[ 2265.650410] fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery,
exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.
Signed-off-by: Kai Li <li.kai4 at h3c.com>
---
fs/ocfs2/journal.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 1afe57f425a0..b8b9d26fa731 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int
local, int replayed)
ocfs2_clear_journal_error(osb->sb, journal->j_journal,
osb->slot_num);
+ if (replayed) {
+ /* wipe the journal */
+ jbd2_journal_lock_updates(journal->j_journal);
+ status = jbd2_journal_flush(journal->j_journal);
+ jbd2_journal_unlock_updates(journal->j_journal);
+ mlog(ML_NOTICE, "journal recovery complete, status=%d", status);
+ }
+
status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
if (status < 0) {
mlog_errno(status);
--
2.24.0.windows.2
Changwei Ge
2019-Dec-11 12:47 UTC
[Ocfs2-devel] [PATCH] ocfs2: call journal flush to mark journal as empty after journal recovery when mount
Hi Kai, Now the problem is more clear to me. Just a few comments inline. On 12/11/19 6:03 PM, Kai Li wrote:> If journal is dirty when mount, it will be replayed but jbd2 sb > log tail cannot be updated to mark a new start because > journal->j_flag has already been set with JBD2_ABORT first > in journal_init_common. When a new transaction is committed, it > will be recored in block 1 first(journal->j_tail is set to 1 in > journal_reset). > > If emergency restart happens again before journal super block is > updated unfortunately, the new recorded trans will not be replayed > in the next mount.So this issue happens before the first committing log iteration comes (running in jbd2 kernel thread), right? This leads jbd2 losing the chance to update *on-disk* journal super block but the dynamic status of journal is still remaining in memory. Yes, I agree. We should update on-disk journal super block after journal recovery since that procedure doesn't involve journal status in memory which is just reset to the very beginning(tail and head pointing to the first block) of journal region. Moreover, during journal recovery running by peer nodes, ocfs2 already does that like what this patch does. ocfs2_recover_node() -> ocfs2_replay_journal(). Very good job to catch such an exception. :-)> > This exception happens when this lun is used by only one node. If it > is used by multi-nodes, other node will replay its journal and its > journal sb block will be updated after recovery. > > To fix this problem, use jbd2_journal_flush to mark journal as empty as > ocfs2_replay_journal has done. > > The following jbd2 journal can be generated by touching a new file after > journal is replayed, and seq 15 is the first valid commit, but first seq > is 13 in journal super block. > logdump: > Block 0: Journal Superblock > Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2) > Blocksize: 4096 Total Blocks: 32768 First Block: 1 > First Commit ID: 13 Start Log Blknum: 1 > Error: 0 > Feature Compat: 0 > Feature Incompat: 2 block64 > Feature RO compat: 0 > Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36 > FS Share Cnt: 1 Dynamic Superblk Blknum: 0 > Per Txn Block Limit Journal: 0 Data: 0 > > Block 1: Journal Commit Block > Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK) > > Block 2: Journal Descriptor > Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK) > No. Blocknum Flags > 0. 587 none > UUID: 00000000000000000000000000000000 > 1. 8257792 JBD2_FLAG_SAME_UUID > 2. 619 JBD2_FLAG_SAME_UUID > 3. 24772864 JBD2_FLAG_SAME_UUID > 4. 8257802 JBD2_FLAG_SAME_UUID > 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG > ... > Block 7: Inode > Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) > FS Generation: 2839773110 (0xa9437fb6) > CRC32: 00000000 ECC: 0000 > Type: Regular Attr: 0x0 Flags: Valid > Dynamic Features: (0x1) InlineData > User: 0 (root) Group: 0 (root) Size: 7 > Links: 1 Clusters: 0 > ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 > atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 > mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 > dtime: 0x0 -- Thu Jan 1 08:00:00 1970 > ... > Block 9: Journal Commit Block > Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK) > > The following is jouranl recovery log when recovering the upper jbd2 > journal when mount again. > syslog: > [ 2265.648622] ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. > [ 2265.649695] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 > [ 2265.650407] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 > [ 2265.650409] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 > [ 2265.650410] fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13 > > Due to first commit seq 13 recorded in journal super is not consistent > with the value recorded in block 1(seq is 14), journal recovery will be > terminated before seq 15 even though it is an unbroken commit, inode > 8257802 is a new file and it will be lost. > > Signed-off-by: Kai Li <li.kai4 at h3c.com> > --- > fs/ocfs2/journal.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c > index 1afe57f425a0..b8b9d26fa731 100644 > --- a/fs/ocfs2/journal.c > +++ b/fs/ocfs2/journal.c > @@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed) > > ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num); > > + if (replayed) { > + /* wipe the journal */ > + jbd2_journal_lock_updates(journal->j_journal); > + status = jbd2_journal_flush(journal->j_journal); > + jbd2_journal_unlock_updates(journal->j_journal); > + mlog(ML_NOTICE, "journal recovery complete, status=%d", status);Is the above mlog line necessary? Can we just log a warning only jbd2_journal_flush() fails and let the mount continue? IMO, the mlog line can't help much. Otherwise, this patch looks good to me. Thanks, Changwei> + } > + > status = ocfs2_journal_toggle_dirty(osb, 1, replayed); > if (status < 0) { > mlog_errno(status); >
Joseph Qi
2019-Dec-11 13:17 UTC
[Ocfs2-devel] [PATCH] ocfs2: call journal flush to mark journal as empty after journal recovery when mount
On 19/12/11 18:03, Kai Li wrote:> If journal is dirty when mount, it will be replayed but jbd2 sb > log tail cannot be updated to mark a new start because > journal->j_flag has already been set with JBD2_ABORT first > in journal_init_common. When a new transaction is committed, it > will be recored in block 1 first(journal->j_tail is set to 1 in > journal_reset). > > If emergency restart happens again before journal super block is > updated unfortunately, the new recorded trans will not be replayed > in the next mount. >I think I've finally understood the problem. But I don't think it has been clearly described for reviewing. I strongly suggest you describe the problem in the way of timeline, such as in which step, do what operation, and what is the status, etc.> This exception happens when this lun is used by only one node. If it > is used by multi-nodes, other node will replay its journal and its > journal sb block will be updated after recovery. > > To fix this problem, use jbd2_journal_flush to mark journal as empty as > ocfs2_replay_journal has done.>Sounds reasonable. But IMO, it is really a corner use scenario, using cluster filesystem in single node... Thanks, Joseph> The following jbd2 journal can be generated by touching a new file after > journal is replayed, and seq 15 is the first valid commit, but first seq > is 13 in journal super block. > logdump: > Block 0: Journal Superblock > Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2) > Blocksize: 4096 Total Blocks: 32768 First Block: 1 > First Commit ID: 13 Start Log Blknum: 1 > Error: 0 > Feature Compat: 0 > Feature Incompat: 2 block64 > Feature RO compat: 0 > Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36 > FS Share Cnt: 1 Dynamic Superblk Blknum: 0 > Per Txn Block Limit Journal: 0 Data: 0 > > Block 1: Journal Commit Block > Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK) > > Block 2: Journal Descriptor > Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK) > No. Blocknum Flags > 0. 587 none > UUID: 00000000000000000000000000000000 > 1. 8257792 JBD2_FLAG_SAME_UUID > 2. 619 JBD2_FLAG_SAME_UUID > 3. 24772864 JBD2_FLAG_SAME_UUID > 4. 8257802 JBD2_FLAG_SAME_UUID > 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG > ... > Block 7: Inode > Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) > FS Generation: 2839773110 (0xa9437fb6) > CRC32: 00000000 ECC: 0000 > Type: Regular Attr: 0x0 Flags: Valid > Dynamic Features: (0x1) InlineData > User: 0 (root) Group: 0 (root) Size: 7 > Links: 1 Clusters: 0 > ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 > atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 > mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 > dtime: 0x0 -- Thu Jan 1 08:00:00 1970 > ... > Block 9: Journal Commit Block > Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK) > > The following is jouranl recovery log when recovering the upper jbd2 > journal when mount again. > syslog: > [ 2265.648622] ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. > [ 2265.649695] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 > [ 2265.650407] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 > [ 2265.650409] fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 > [ 2265.650410] fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13 > > Due to first commit seq 13 recorded in journal super is not consistent > with the value recorded in block 1(seq is 14), journal recovery will be > terminated before seq 15 even though it is an unbroken commit, inode > 8257802 is a new file and it will be lost. > > Signed-off-by: Kai Li <li.kai4 at h3c.com> > --- > fs/ocfs2/journal.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c > index 1afe57f425a0..b8b9d26fa731 100644 > --- a/fs/ocfs2/journal.c > +++ b/fs/ocfs2/journal.c > @@ -1066,6 +1066,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed) > > ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num); > > + if (replayed) { > + /* wipe the journal */ > + jbd2_journal_lock_updates(journal->j_journal); > + status = jbd2_journal_flush(journal->j_journal); > + jbd2_journal_unlock_updates(journal->j_journal); > + mlog(ML_NOTICE, "journal recovery complete, status=%d", status); > + } > + > status = ocfs2_journal_toggle_dirty(osb, 1, replayed); > if (status < 0) { > mlog_errno(status); >