Nut upsuser - Jul 2020 - New UPS to the DB

Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable
unit.
So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get NUT
running.

Please direct me what command should I issue to collect the data in order
to include the UPS to device database?

P.S. tryed /lib/nut/blazer_ser -DD... but no difference from a regular
output has being added by the driver.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200707/8061e3a8/attachment.html>

On Tue, 7 Jul 2020, Alexander Karenin wrote:
> Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable
unit.So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get
> NUT running.
> 
> Please direct me what command should I issue to collect the data in order
to include the UPS to device database?
It would be interesting to see the output of

  upsc <myups>
  upsrw <myups>
  upscmd -l <myups>

Roger

Hi Roger.

~$ upsc myups
Init SSL without certificate database
battery.charge: 100
battery.voltage: 27.60
battery.voltage.high: 26.00
battery.voltage.low: 20.80
battery.voltage.nominal: 24.0
device.mfr:
device.model:
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyUSB0
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 1.57
input.current.nominal: 4.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 232.4
input.voltage.fault: 120.0
input.voltage.nominal: 220
output.voltage: 220.1
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: V009B003Dups.load: 20
ups.mfr:
ups.model:
ups.status: OL
ups.temperature: 28.0
ups.type: online


upsrw produced no output

~$ upscmd -l myups
Instant commands supported on UPS [myups]:

beeper.toggle - Toggle the UPS beeper
load.off - Turn off the load immediately
load.on - Turn on the load immediately
shutdown.return - Turn off the load and return when power is back
shutdown.stayoff - Turn off the load and remain off
shutdown.stop - Stop a shutdown in progress
test.battery.start - Start a battery test
test.battery.start.deep - Start a deep battery test
test.battery.start.quick - Start a quick battery test
test.battery.stop - Stop the battery tes

On Tue, Jul 7, 2020, 11:52 Roger Price <roger at rogerprice.org> wrote:
> On Tue, 7 Jul 2020, Alexander Karenin wrote:
>
> > Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232
> capable unit.So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no
> issue to get
> > NUT running.
> >
> > Please direct me what command should I issue to collect the data in
> order to include the UPS to device database?
>
> It would be interesting to see the output of
>
>   upsc <myups>
>   upsrw <myups>
>   upscmd -l <myups>
>
> Roger_______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200707/06560702/attachment.html>