Nut upsuser - May 2012 - nut-scanner serial port

Hi,
i have a ups which is tescom xt10 and i want nut with it.it has rs 232 port, and
bundle softwar T-mon works with serial port.
in ups.conf, 
i add following lines,
[serial-ups]driver  = genericupsport = /dev/ttyS0upstype = 1
when i start driver, it says input/output error..i try for all upstype values,
but i dont work.
i want to use nut-scanner but it dont find any ups.
how can i install serial ups to nut?
thanks 
Ramazan.

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120518/54c5afca/attachment-0001.html>

On May 18, 2012, at 7:26 AM, ramazan firin wrote:
> when i start driver, it says input/output error..
What is the exact error message?
> i try for all upstype values, but i dont work.
genericups is only for contact-closure UPSes. What protocol does your UPS use?
(I have not heard of this brand, or T-mon.)

-- 
Charles Lepple
clepple at gmail