John Huong
2011-Mar-16 17:03 UTC
[Nut-upsuser] Liebert PSIXR 3000 intellislot web card support with NUT 2.6.0
Hi, Just started using NUT with a Liebert PSI-XR 3000 with an Intellislot web card. It seems I can't get it to run properly. I am using NUT 2.6.0 built from source on Ubuntu 8.0.4 . My build parameters are : ./configure --enable-strip --with-linux-hiddev=/usr/include/linux/hiddev.h --with-udev-dir=/lib/udev \ --prefix=/usr \ --exec-prefix=/ \ --sysconfdir=/etc/nut \ --mandir=/usr/share/man \ --libdir=/lib \ --includedir=/usr/include \ --without-ssl \ --with-dev \ --enable-static \ --with-statepath=/var/run/nut \ --with-altpidpath=/var/run/nut \ --with-drvpath=/lib/nut \ --with-htmlpath=/usr/share/nut/www \ --with-pidpath=/var/run/nut \ --datadir=/usr/share/nut \ --with-pkgconfig-dir=/usr/lib/pkgconfig \ --with-user=nut --with-group=nut I get this when I run upsdrvctl start Detected LiebertPSI on host 192.168.0.11 (mib: ietf 1.3) [liebertpsiweb] unhandled ASN 0x6 recieved from 1.3.6.1.2.1.33.1.7.1.0 Then when I run /etc/init.d/nut I get * Starting Network UPS Tools [ OK ] Broadcast Message from nut at mail.sop.com.my (somewhere) at 1:02 ... Communications with UPS liebertpsiweb at localhost lost Running upsc liebertpsiweb at localhost gets me : battery.charge: 100.00 battery.current: 0.00 battery.runtime: 0.00 battery.runtime.low: 120.00 battery.temperature: 30.00 battery.voltage: 55.00 beeper.status: enabled device.mfr: Emerson Network Power device.model: LiebertPSI device.type: ups driver.name: snmp-ups driver.parameter.mibs: auto driver.parameter.pollinterval: 2 driver.parameter.port: 192.168.0.11 driver.version: 2.6.0 driver.version.internal: 0.50 (mib: ietf 1.3) input.bypass.phases: 0.00 input.current: 0.00 input.frequency: 50.00 input.frequency.nominal: 50.00 input.phases: 1.00 input.realpower: 0.00 input.transfer.high: 0.00 input.transfer.low: 0.00 input.voltage: 247.00 input.voltage.nominal: 2300.00 output.current: 0.00 output.frequency: 50.00 output.frequency.nominal: 50.00 output.phases: 1.00 output.power.nominal: 0.00 output.realpower: 0.00 output.realpower.nominal: 0.00 output.voltage: 249.00 output.voltage.nominal: 2300.00 ups.firmware: EX000842 ups.firmware.aux: 2.39.CP504.ABE.00 ups.load: 17.00 ups.mfr: Emerson Network Power ups.model: LiebertPSI ups.start.auto: no ups.status: ups.test.result: done and passed ups.timer.reboot: -1 ups.timer.shutdown: -1 ups.timer.start: -1 What can I do or is this particular model not supported?
Arnaud Quette
2011-Mar-23 09:29 UTC
[Nut-upsuser] Liebert PSIXR 3000 intellislot web card support with NUT 2.6.0
Hi John, 2011/3/16 John Huong <jahuong at gmail.com>> Hi, > > Just started using NUT with a Liebert PSI-XR 3000 with an Intellislot web > card. > > It seems I can't get it to run properly. > > I am using NUT 2.6.0 built from source on Ubuntu 8.0.4 . > > My build parameters are : > > ./configure --enable-strip > --with-linux-hiddev=/usr/include/linux/hiddev.h > --with-udev-dir=/lib/udev \ > --prefix=/usr \ > --exec-prefix=/ \ > --sysconfdir=/etc/nut \ > --mandir=/usr/share/man \ > --libdir=/lib \ > --includedir=/usr/include \ > --without-ssl \ > --with-dev \ > --enable-static \ > --with-statepath=/var/run/nut \ > --with-altpidpath=/var/run/nut \ > --with-drvpath=/lib/nut \ > --with-htmlpath=/usr/share/nut/www \ > --with-pidpath=/var/run/nut \ > --datadir=/usr/share/nut \ > --with-pkgconfig-dir=/usr/lib/pkgconfig \ > --with-user=nut --with-group=nut > > > I get this when I run upsdrvctl start > > Detected LiebertPSI on host 192.168.0.11 (mib: ietf 1.3) > [liebertpsiweb] unhandled ASN 0x6 recieved from 1.3.6.1.2.1.33.1.7.1.0 > > Then when I run /etc/init.d/nut I get > > * Starting Network UPS Tools [ > OK ] > > Broadcast Message from nut at mail.sop.com.my > (somewhere) at 1:02 ... > > Communications with UPS liebertpsiweb at localhost lost > > Running upsc liebertpsiweb at localhost gets me : > > battery.charge: 100.00 > battery.current: 0.00 > battery.runtime: 0.00 > battery.runtime.low: 120.00 > battery.temperature: 30.00 > battery.voltage: 55.00 > beeper.status: enabled > device.mfr: Emerson Network Power > device.model: LiebertPSI > device.type: ups > driver.name: snmp-ups > driver.parameter.mibs: auto > driver.parameter.pollinterval: 2 > driver.parameter.port: 192.168.0.11 > driver.version: 2.6.0 > driver.version.internal: 0.50 (mib: ietf 1.3) > input.bypass.phases: 0.00 > input.current: 0.00 > input.frequency: 50.00 > input.frequency.nominal: 50.00 > input.phases: 1.00 > input.realpower: 0.00 > input.transfer.high: 0.00 > input.transfer.low: 0.00 > input.voltage: 247.00 > input.voltage.nominal: 2300.00 > output.current: 0.00 > output.frequency: 50.00 > output.frequency.nominal: 50.00 > output.phases: 1.00 > output.power.nominal: 0.00 > output.realpower: 0.00 > output.realpower.nominal: 0.00 > output.voltage: 249.00 > output.voltage.nominal: 2300.00 > ups.firmware: EX000842 > ups.firmware.aux: 2.39.CP504.ABE.00 > ups.load: 17.00 > ups.mfr: Emerson Network Power > ups.model: LiebertPSI > ups.start.auto: no > ups.status: > ups.test.result: done and passed > ups.timer.reboot: -1 > ups.timer.shutdown: -1 > ups.timer.start: -1 > > What can I do or is this particular model not supported? >the support for this unit, and more generally Liebert SNMP support, doesn't yet exist. the best for you is to check the MIB(s) supported, since Liebert may provide its own, with a basic RFC 1628 (aka IETF MIB) supplement. if you're willing to work on this, we will help you. The idea is to create a lookup table between SNMP data and values to the NUT ones, as done for example here (look for "snmp_info_t"): http://svn.debian.org/wsvn/nut/trunk/drivers/eaton-mib.c So, send us back an SNMP walk of the device, and start checking for creating this mapping. Note that you may want to work with Philip Tait http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005255.html http://lists.alioth.debian.org/pipermail/nut-upsdev/2011-February/005263.html Have a special look at the 2nd thread! cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110323/76c129fd/attachment.htm>
Maybe Matching Threads
- Liebert PSIXR 3000 intellislot web card support with NUT 2.6.0
- <Liebert> <PowerSure PSI 1440> supported by <?>
- Liebert Intellislot support
- Liebert Intellislot support
- Liebert IntelliSlot Unity Card IS-UNITY-DP snmp UPS-MIB.upsIdentManufacturer '1.3.6.1.2.1.33.1.1.1.0' problem