We have multiple TrippLite Omni900LCD UPS. There are a couple pieces of equipment connected to each UPS. I would like to connect the UPSs to one computer through USB which would shutdown the appropriate equipment based on events monitored by upsmon using upssched. I've configured NUT using usbhid-ups driver and compiled/installed NUT. I've done some testing and it seems to work. Unfortunately all the USB ports are on the same bus for the computers that I could use for this and the TrippLites seem to use the same serial number. Any way to uniquely identify the UPSs to NUT? Or maybe to set a value in the UPS that could be used to identify the UPS? Thanks.
> We have multiple TrippLite Omni900LCD UPS. There are a couple pieces > of equipment connected to each UPS. I would like to connect the UPSs to > one computer through USB which would shutdown the appropriate equipment > based on events monitored by upsmon using upssched. I've configured NUT > using usbhid-ups driver and compiled/installed NUT. I've done some > testing and it seems to work. Unfortunately all the USB ports are on the > same bus for the computers that I could use for this and the TrippLites > seem to use the same serial number. Any way to uniquely identify the > UPSs to NUT? Or maybe to set a value in the UPS that could be used to > identify the UPS?Could you run the driver in debug mode (start it up from the commandline with the -DD option added) like usbhid-ups -a <upsname> -DD with each time just one UPS attached? This command will dump all the variables that the UPS has and we *might* be able to tell them apart. The first few seconds of output should be enough. Best regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57
No they bear absolutely no resemblance to the real serial numbers. Could be some internal model number used by TrippLite. Either way not useful for identifying a distinct UPS. ----- Original Message ----- From: "Charles Lepple" <clepple at gmail.com> To: "Todd Woods" <twoods at commo.com> Cc: "Arjen de Korte" <nut+users at de-korte.org>; "nut" <nut-upsuser at lists.alioth.debian.org> Sent: Friday, August 31, 2007 3:14 PM Subject: Re: [Nut-upsuser] Multiple Tripplite OMNI900LCD> On 8/31/07, Todd Woods <twoods at commo.com> wrote: >> ------------------------------------ >> One UPS plugged into first USB port >> ------------------------------------- > [...] >> - Serial Number: FW-2263 E > [...] >> --------------------------------------------- >> Different UPS plugged into second USB port >> ---------------------------------------------- > [...] >> - Serial Number: FW-2263 E > > odd... do either of these serial numbers look similar to any serial > numbers on the product label? > > -- > - Charles Lepple >