Hi,
The company I work for has recently purchased an Advice TopGuard 2K UPS.
it took me a while, sniffing the communication between the "official"
UPS monitor program and the UPS device itself, until I figured out that
the correct driver for this UPS is megatec.
After some testing it works.
Someone should probably add this to the compatibility list:
Manufacturer: Advice
Model: TopGuard 2000VA
NUT Driver: megatec
In fact, this is a powercom device inside, but it is sold under the
Advice brand name, and has Advice written all over it.
I spoke to one David Be'er from Advice, who told me to use the
"official" monitor software - but he didn't have any solution to
the
ncurses-4 requirement (I had only ncurses-5 on my system)
He offered to forward any questions to the manufacturer abroad, but I
didn't do that since I found out that the megatec driver works well enough.
Thank you guys for the great software,
Now I'm off to setup the slave "upsmon"s
Ilan.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20070820/1d00c3d7/attachment.htm
