DaneZ
2006-Jul-24 19:23 UTC
[Nut-upsdev] Fw: INFOSEC 500 XP en USB et drivers newhidups avec '-x generic'
Bonjour,
Je souheterais utilis? la version qui permet le '-x generic',mais je
ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail
ci-dessous)
DaneZ
_____
From: DaneZ [mailto:david.guillotte@danez.no-ip.org]
To: arnaud.quette@mgeups.com
Sent: Sat, 08 Jul 2006 23:24:06 +0200
Subject: Fw: INFOSEC 500 XP en USB
_____
Bonjour Arnaud,
Je me permet d'envoyer ce mail car j'ai trouv? votre mail dans les
sources de nut.
J'ai acheter recemment un UPS IFOSEC 500 XP USB ,mais pas possible de le
faire fonctionn? avec nut (ou autre).
apres avoir essayer tous les drivers je pense que c'est celui la..
danez-debian:/lib/nut# ./newhidups -DDDD -u root -a myups
Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2)
debug level is '4'
Opening new device (0665/5161)
Opening new device (0000/0000)
found 0 (-1)
No USB/HID UPS found
mais ca ne fonctionne pas...
J'ai essayer sur 3 linux differents (tous de debian soit testing soit
stable)
mais celle sur laquelle l'onduleur doit tourn? est la testing..
danez-debian:/usr/local/ups/bin# uname -a
Linux danez-debian 2.6.15 #1 Tue Jul 4 22:55:24 CEST 2006 i686 GNU/Linux
lsusb donne....
danez-debian:/lib/nut# lsusb -v
Bus 001 Device 004: ID 0665:5161
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0665
idProduct 0x5161
bcdDevice 0.02
iManufacturer 1 Cypress Semiconductor
iProduct 2 USB to Serial
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 4 Sample HID
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 27
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:07.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0x00
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0303 lowspeed power enable connect
Device Status: 0x0001
Self Powered
Le port est fonctionnel et est sur cat /dev/usb/hiddev0 .
Car cat /dev/usb/hiddev0 attend juqu'a ce que je debranche l'UPS..
J'ai modifier certaines sources de nut-2.0.4-pre, en enlevant certain check,
mais sans succes.
J'ai trouv? dans un lien ou quelqu'un qui avait sensiblement le meme
probleme mais il me faufrait les sources 2.1.0
(extrait du lien
http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-April/000825.html)
> When I try to set "generic" in my ups.conf file for newhidups
driver, I got
> an error message so I decided to use the SVN repository to compile the
> latest source code 2.1.0.
>
> Now, all is fine and the newhidups driver returns those debug info:
Votre aide serait la bienvenue,
Merci d'avance.
DaneZ
This message and any attachments (the "message") is
intended solely for the addressees and is confidential.
If you receive this message in error, please delete it and
immediately notify the sender. Any use not in accord with
its purpose, any dissemination or disclosure, either whole
or partial, is prohibited except formal approval. The internet
can not guarantee the integrity of this message.
DaneZ.no-ip.org (and its subsidiaries) shall (will) not
therefore be liable for the message if modified.
-------------------------
Ce message et toutes les pieces jointes (ci-apres le
"message") sont etablis a l'intention exclusive de ses
destinataires et sont confidentiels. Si vous recevez ce
message par erreur, merci de le detruire et d'en avertir
immediatement l'expediteur. Toute utilisation de ce
message non conforme a sa destination, toute diffusion
ou toute publication, totale ou partielle, est interdite, sauf
autorisation expresse. L'internet ne permettant pas
d'assurer l'integrite de ce message, DaneZ.no-ip.org (et ses
filiales) decline(nt) toute responsabilite au titre de ce
message, dans l'hypothese ou il aurait ete modifie.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20060711/c2187285/attachment.htm
Jonathan Dion
2006-Jul-25 07:03 UTC
[Nut-upsdev] Fw: INFOSEC 500 XP en USB et drivers newhidups avec '-x generic'
Hello DaneZ You know, you shouldn't speack french on this list as ups-dev is an internationnal mailing list. I you want to have an answer, please make the effort to translate your request in english. Nevertheless, Arnaud already answered you on this subject, and I cannot answer you differently that he did : As I understand, you need to use the 2.1 version. You can find it, and all the others version on this page : http://eu1.networkupstools.org/source.html As Arnaud told you before, please try the following : - read http://boxster.ghz.cc/projects/nut/browser/trunk/docs/hid-subdrivers.txt - try to add your vendorID (0665) to an existant sub-driver, or create a new sub-driver - use "newhidups -DD -x generic" (from the 2.1 version), and post what it returned. After you have done that, we could perhaps start to help you. Cheers, Jonathan Dion On 7/11/06, DaneZ <danez@danez.no-ip.org> wrote:> > Bonjour, > > Je souheterais utilis? la version qui permet le '-x generic',mais je ne > sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail > ci-dessous) > > DaneZ > > ------------------------------ > *From:* DaneZ [mailto: david.guillotte@danez.no-ip.org] > *To:* arnaud.quette@mgeups.com > *Sent:* Sat, 08 Jul 2006 23:24:06 +0200 > *Subject:* Fw: INFOSEC 500 XP en USB > > ------------------------------ > ** Bonjour Arnaud, > > Je me permet d'envoyer ce mail car j'ai trouv? votre mail dans les sources > de nut. > J'ai acheter recemment un UPS IFOSEC 500 XP USB ,mais pas possible de le > faire fonctionn? avec nut (ou autre). > > apres avoir essayer tous les drivers je pense que c'est celui la.. > > danez-debian:/lib/nut# ./newhidups -DDDD -u root -a myups > Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2) > > debug level is '4' > Opening new device (0665/5161) > Opening new device (0000/0000) > found 0 (-1) > No USB/HID UPS found > > mais ca ne fonctionne pas... > > J'ai essayer sur 3 linux differents (tous de debian soit testing soit > stable) > mais celle sur laquelle l'onduleur doit tourn? est la testing.. > > danez-debian:/usr/local/ups/bin# uname -a > Linux danez-debian 2.6.15 #1 Tue Jul 4 22:55:24 CEST 2006 i686 GNU/Linux > > lsusb donne.... > > danez-debian:/lib/nut# lsusb -v > > Bus 001 Device 004: ID 0665:5161 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0665 > idProduct 0x5161 > bcdDevice 0.02 > iManufacturer 1 Cypress Semiconductor > iProduct 2 USB to Serial > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 3 > bmAttributes 0x80 > (Bus Powered) > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Devices > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 4 Sample HID > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.00 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 27 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 32 > Device Status: 0x0000 > (Bus Powered) > > Bus 001 Device 001: ID 0000:0000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 Hub > bDeviceSubClass 0 Unused > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x0000 > idProduct 0x0000 > bcdDevice 2.06 > iManufacturer 3 Linux 2.6.15 uhci_hcd > iProduct 2 UHCI Host Controller > iSerial 1 0000:00:07.2 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 Unused > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0002 1x 2 bytes > bInterval 255 > Hub Descriptor: > bLength 9 > bDescriptorType 41 > nNbrPorts 2 > wHubCharacteristic 0x000a > No power switching (usb 1.0) > Per-port overcurrent protection > bPwrOn2PwrGood 1 * 2 milli seconds > bHubContrCurrent 0 milli Ampere > DeviceRemovable 0x00 > PortPwrCtrlMask 0x00 > Hub Port Status: > Port 1: 0000.0100 power > Port 2: 0000.0303 lowspeed power enable connect > Device Status: 0x0001 > Self Powered > > Le port est fonctionnel et est sur cat /dev/usb/hiddev0 . > Car cat /dev/usb/hiddev0 attend juqu'a ce que je debranche l'UPS.. > > J'ai modifier certaines sources de nut-2.0.4-pre, en enlevant certain > check, mais sans succes. > > J'ai trouv? dans un lien ou quelqu'un qui avait sensiblement le meme > probleme mais il me faufrait les sources 2.1.0 > (extrait du lien > http://lists.alioth.debian.org/pipermail/nut-upsdev/2006-April/000825.html > ) > > >* When I try to set "generic" in my ups.conf file for newhidups driver, I got > *>* an error message so I decided to use the SVN repository to compile the > *>* latest source code 2.1.0 > .* > > >* > *>* Now, all is fine and the newhidups driver returns those debug info:* > > > Votre aide serait la bienvenue, > Merci d'avance. > > DaneZ > > > > ------------------------------ > This message and any attachments (the "message") is > intended solely for the addressees and is confidential. > If you receive this message in error, please delete it and > immediately notify the sender. Any use not in accord with > its purpose, any dissemination or disclosure, either whole > or partial, is prohibited except formal approval. The internet > can not guarantee the integrity of this message. > DaneZ.no-ip.org (and its subsidiaries) shall (will) not > therefore be liable for the message if modified. > ------------------------- > Ce message et toutes les pieces jointes (ci-apres le > "message") sont etablis a l'intention exclusive de ses > destinataires et sont confidentiels. Si vous recevez ce > message par erreur, merci de le detruire et d'en avertir > immediatement l'expediteur. Toute utilisation de ce > message non conforme a sa destination, toute diffusion > ou toute publication, totale ou partielle, est interdite, sauf > autorisation expresse. L'internet ne permettant pas > d'assurer l'integrite de ce message, DaneZ.no-ip.org (et ses > filiales) decline(nt) toute responsabilite au titre de ce > message, dans l'hypothese ou il aurait ete modifie. > > _______________________________________________ > Nut-upsdev mailing list > Nut-upsdev@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev > > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20060725/d94af6b1/attachment-0001.htm