Nut upsdev - Sep 2005 - Re: Hardware Compatibility list - HP R3000 XR ups

Hi Matthijs,
> Arnaud.
>After some trial and error, i found out that the HP R3000 XR ups's we
have
>can be used with Network Ups Tools.
>This using the bcmxcp driver.
>
>Note that in the code of this driver (line 1420) , the Baudrate is fixed to
>9600 baud.
>to connect to a serial HP R3000 XR ups one needs to change this to 19200
>baud.
>
>ideally, this should be an config option/autodetect. As i have not the
>time/knowledge to make it so,
>and as we only have the HP R3000 XR ups's here, i will leave it just to
>change the setting in the sourcecode.
@Kjell: can you have a look at it, and produce a patch for autodetecting (or
having a baudrate param) + adding the HP R3000 XR model to the compat list?

thanks for your contribution,
Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer -
http://people.debian.org/~aquette/<http://people.debian.org/%7Eaquette/>
OpenSource Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20050928/c91b823b/attachment.htm

Hi Matthijs and Arnaud

Yes i have started to do some coding, but the problem is the
time. Have been busy with the work and lot of other things.

Was planing on do a baudhunting function, but to make this in a clean 
way i have to rewrite some of the communication parts. But i can make a
small patch to make it a config param.

Regards
Kjell

P.S. I add it to the compat list on my page.
 
ons 2005-09-28 klockan 12:59 +0200 skrev Arnaud Quette:
> Hi Matthijs,
> 
> > Arnaud.
> >After some trial and error, i found out that the HP R3000 XR  ups's
> we have
> >can be used with Network Ups Tools.
> >This using the bcmxcp driver.
> >
> >Note that in the code of this driver (line 1420) , the Baudrate is
> fixed to
> >9600 baud.
> >to connect to a serial HP R3000 XR  ups one needs to change this to
> 19200
> >baud.
> >
> >ideally, this should be an config option/autodetect. As i have not
> the
> >time/knowledge to make it so,
> >and as we only have the HP R3000 XR  ups's here, i will leave it
just
> to
> >change the setting in the sourcecode.
> 
> @Kjell: can you have a look at it, and produce a patch for
> autodetecting (or having a baudrate param) + adding the HP R3000 XR
> model to the compat list?
> 
> thanks for your contribution,
> Arnaud
> -- 
> Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
> Network UPS Tools (NUT) Project Leader -
> http://www.networkupstools.org/
> Debian Developer - http://people.debian.org/~aquette/
> OpenSource Developer - http://arnaud.quette.free.fr/ 
> _______________________________________________
> Nut-upsdev mailing list
> Nut-upsdev@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev