kernel test robot complains about missing kerneldoc entries: drivers-gpu-drm-nouveau-nvkm-subdev-gsp-r535.c:warning: Function-parameter-or-struct-member-gsp-not-described-in-nvkm_gsp_radix3_sg Signed-off-by: Timur Tabi <ttabi at nvidia.com> --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index a41735ab6068..1c46e3f919be 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1432,6 +1432,10 @@ r535_gsp_msg_post_event(void *priv, u32 fn, void *repv, u32 repc) /** * r535_gsp_msg_run_cpu_sequencer() -- process I/O commands from the GSP + * @priv: gsp pointer + * @fn: function number (ignored) + * @repv: pointer to libos print RPC + * @repc: message size * * The GSP sequencer is a list of I/O commands that the GSP can send to * the driver to perform for various purposes. The most common usage is to @@ -1783,6 +1787,7 @@ static void create_pte_array(u64 *ptes, dma_addr_t addr, size_t size) /** * r535_gsp_libos_init() -- create the libos arguments structure + * @gsp: gsp pointer * * The logging buffers are byte queues that contain encoded printf-like * messages from GSP-RM. They need to be decoded by a special application @@ -1922,6 +1927,10 @@ nvkm_gsp_radix3_dtor(struct nvkm_gsp *gsp, struct nvkm_gsp_radix3 *rx3) /** * nvkm_gsp_radix3_sg - build a radix3 table from a S/G list + * @gsp: gsp pointer + * @sgt: S/G list to traverse + * @size: size of the image, in bytes + * @rx3: radix3 array to update * * The GSP uses a three-level page table, called radix3, to map the firmware. * Each 64-bit "pointer" in the table is either the bus address of an entry in -- 2.34.1