Lyude Paul
2018-Aug-30 17:16 UTC
[Nouveau] [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect()
It looks like that when we moved over to using drm_connector_for_each_possible_encoder() in nouveau, that one rather important part of this function got dropped by accident: /* Right v here */ for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) { int id = connector->encoder_ids[i]; if (id == 0) break; Since it's rather difficult to notice: the conditional in this loop is actually: nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER Meaning that all early breaks result in nv_encoder keeping it's value, otherwise nv_encoder = NULL. Ugh. Since this got dropped, nouveau_connector_ddc_detect() now returns an encoder for every single connector, regardless of whether or not it's detected: [ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DP-2 So: fix this to ensure we only return an encoder if we actually found one, and clean up the rest of the function while we're at it since it's nearly impossible to read properly. Changes since v1: - Don't skip ddc probing for LVDS if we can't switch DDC through vga-switcheroo, just do the DDC probing without calling vga_switcheroo_lock_ddc() - skeggsb Signed-off-by: Lyude Paul <lyude at redhat.com> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com> Fixes: ddba766dd07e ("drm/nouveau: Use drm_connector_for_each_possible_encoder()") --- drivers/gpu/drm/nouveau/nouveau_connector.c | 49 ++++++++++++--------- 1 file changed, 28 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 71c3bd8ff9f8..461111aaedc4 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -414,9 +414,10 @@ nouveau_connector_ddc_detect(struct drm_connector *connector) struct nouveau_connector *nv_connector = nouveau_connector(connector); struct nouveau_drm *drm = nouveau_drm(dev); struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device); - struct nouveau_encoder *nv_encoder = NULL; + struct nouveau_encoder *nv_encoder = NULL, *found = NULL; struct drm_encoder *encoder; - int i, panel = -ENODEV; + int i, ret, panel = -ENODEV; + bool switcheroo_ddc = false; /* eDP panels need powering on by us (if the VBIOS doesn't default it * to on) before doing any AUX channel transactions. LVDS panel power @@ -433,37 +434,43 @@ nouveau_connector_ddc_detect(struct drm_connector *connector) drm_connector_for_each_possible_encoder(connector, encoder, i) { nv_encoder = nouveau_encoder(encoder); - if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { - int ret = nouveau_dp_detect(nv_encoder); + switch (nv_encoder->dcb->type) { + case DCB_OUTPUT_DP: + ret = nouveau_dp_detect(nv_encoder); if (ret == NOUVEAU_DP_MST) return NULL; - if (ret == NOUVEAU_DP_SST) - break; - } else - if ((vga_switcheroo_handler_flags() & - VGA_SWITCHEROO_CAN_SWITCH_DDC) && - nv_encoder->dcb->type == DCB_OUTPUT_LVDS && - nv_encoder->i2c) { - int ret; - vga_switcheroo_lock_ddc(dev->pdev); - ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50); - vga_switcheroo_unlock_ddc(dev->pdev); - if (ret) + else if (ret == NOUVEAU_DP_SST) + found = nv_encoder; + + break; + case DCB_OUTPUT_LVDS: + switcheroo_ddc = !!(vga_switcheroo_handler_flags() & + VGA_SWITCHEROO_CAN_SWITCH_DDC); + /* fall-through */ + default: + if (!nv_encoder->i2c) break; - } else - if (nv_encoder->i2c) { + + if (switcheroo_ddc) + vga_switcheroo_lock_ddc(dev->pdev); if (nvkm_probe_i2c(nv_encoder->i2c, 0x50)) - break; + found = nv_encoder; + if (switcheroo_ddc) + vga_switcheroo_unlock_ddc(dev->pdev); + + break; } + if (found) + break; } /* eDP panel not detected, restore panel power GPIO to previous * state to avoid confusing the SOR for other output types. */ - if (!nv_encoder && panel == 0) + if (!found && panel == 0) nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); - return nv_encoder; + return found; } static struct nouveau_encoder * -- 2.17.1
Ville Syrjälä
2018-Aug-30 17:36 UTC
[Nouveau] [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect()
On Thu, Aug 30, 2018 at 01:16:28PM -0400, Lyude Paul wrote:> It looks like that when we moved over to using > drm_connector_for_each_possible_encoder() in nouveau, that one rather > important part of this function got dropped by accident: > > /* Right v here */ > for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) { > int id = connector->encoder_ids[i]; > if (id == 0) > break; > > Since it's rather difficult to notice: the conditional in this loop is > actually: > > nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER > > Meaning that all early breaks result in nv_encoder keeping it's value, > otherwise nv_encoder = NULL. Ugh. > > Since this got dropped, nouveau_connector_ddc_detect() now returns an > encoder for every single connector, regardless of whether or not it's > detected: > > [ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for DP-2 > > So: fix this to ensure we only return an encoder if we actually found > one, and clean up the rest of the function while we're at it since it's > nearly impossible to read properly. > > Changes since v1: > - Don't skip ddc probing for LVDS if we can't switch DDC through > vga-switcheroo, just do the DDC probing without calling > vga_switcheroo_lock_ddc() - skeggsb > > Signed-off-by: Lyude Paul <lyude at redhat.com> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com> > Fixes: ddba766dd07e ("drm/nouveau: Use drm_connector_for_each_possible_encoder()") > --- > drivers/gpu/drm/nouveau/nouveau_connector.c | 49 ++++++++++++--------- > 1 file changed, 28 insertions(+), 21 deletions(-) > > diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c > index 71c3bd8ff9f8..461111aaedc4 100644 > --- a/drivers/gpu/drm/nouveau/nouveau_connector.c > +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c > @@ -414,9 +414,10 @@ nouveau_connector_ddc_detect(struct drm_connector *connector) > struct nouveau_connector *nv_connector = nouveau_connector(connector); > struct nouveau_drm *drm = nouveau_drm(dev); > struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device); > - struct nouveau_encoder *nv_encoder = NULL; > + struct nouveau_encoder *nv_encoder = NULL, *found = NULL; > struct drm_encoder *encoder; > - int i, panel = -ENODEV; > + int i, ret, panel = -ENODEV; > + bool switcheroo_ddc = false; > > /* eDP panels need powering on by us (if the VBIOS doesn't default it > * to on) before doing any AUX channel transactions. LVDS panel power > @@ -433,37 +434,43 @@ nouveau_connector_ddc_detect(struct drm_connector *connector) > drm_connector_for_each_possible_encoder(connector, encoder, i) { > nv_encoder = nouveau_encoder(encoder); > > - if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { > - int ret = nouveau_dp_detect(nv_encoder); > + switch (nv_encoder->dcb->type) { > + case DCB_OUTPUT_DP: > + ret = nouveau_dp_detect(nv_encoder); > if (ret == NOUVEAU_DP_MST) > return NULL; > - if (ret == NOUVEAU_DP_SST) > - break; > - } else > - if ((vga_switcheroo_handler_flags() & > - VGA_SWITCHEROO_CAN_SWITCH_DDC) && > - nv_encoder->dcb->type == DCB_OUTPUT_LVDS && > - nv_encoder->i2c) { > - int ret; > - vga_switcheroo_lock_ddc(dev->pdev); > - ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50); > - vga_switcheroo_unlock_ddc(dev->pdev); > - if (ret) > + else if (ret == NOUVEAU_DP_SST) > + found = nv_encoder; > + > + break; > + case DCB_OUTPUT_LVDS: > + switcheroo_ddc = !!(vga_switcheroo_handler_flags() & > + VGA_SWITCHEROO_CAN_SWITCH_DDC); > + /* fall-through */ > + default: > + if (!nv_encoder->i2c) > break; > - } else > - if (nv_encoder->i2c) { > + > + if (switcheroo_ddc) > + vga_switcheroo_lock_ddc(dev->pdev); > if (nvkm_probe_i2c(nv_encoder->i2c, 0x50)) > - break; > + found = nv_encoder; > + if (switcheroo_ddc) > + vga_switcheroo_unlock_ddc(dev->pdev); > + > + break; > } > + if (found) > + break;The diff is rather messy due to the change to a switch, but after staring at it for a while it does look correct to me. Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com> and sorry for the mess.> } > > /* eDP panel not detected, restore panel power GPIO to previous > * state to avoid confusing the SOR for other output types. > */ > - if (!nv_encoder && panel == 0) > + if (!found && panel == 0) > nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); > > - return nv_encoder; > + return found; > } > > static struct nouveau_encoder * > -- > 2.17.1-- Ville Syrjälä Intel
Lyude Paul
2018-Aug-30 17:37 UTC
[Nouveau] [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect()
On Thu, 2018-08-30 at 20:36 +0300, Ville Syrjälä wrote:> On Thu, Aug 30, 2018 at 01:16:28PM -0400, Lyude Paul wrote: > > It looks like that when we moved over to using > > drm_connector_for_each_possible_encoder() in nouveau, that one rather > > important part of this function got dropped by accident: > > > > /* Right v here */ > > for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) { > > int id = connector->encoder_ids[i]; > > if (id == 0) > > break; > > > > Since it's rather difficult to notice: the conditional in this loop is > > actually: > > > > nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER > > > > Meaning that all early breaks result in nv_encoder keeping it's value, > > otherwise nv_encoder = NULL. Ugh. > > > > Since this got dropped, nouveau_connector_ddc_detect() now returns an > > encoder for every single connector, regardless of whether or not it's > > detected: > > > > [ 1780.056185] nouveau 0000:01:00.0: DRM: DDC responded, but no EDID for > > DP-2 > > > > So: fix this to ensure we only return an encoder if we actually found > > one, and clean up the rest of the function while we're at it since it's > > nearly impossible to read properly. > > > > Changes since v1: > > - Don't skip ddc probing for LVDS if we can't switch DDC through > > vga-switcheroo, just do the DDC probing without calling > > vga_switcheroo_lock_ddc() - skeggsb > > > > Signed-off-by: Lyude Paul <lyude at redhat.com> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com> > > Fixes: ddba766dd07e ("drm/nouveau: Use > > drm_connector_for_each_possible_encoder()") > > --- > > drivers/gpu/drm/nouveau/nouveau_connector.c | 49 ++++++++++++--------- > > 1 file changed, 28 insertions(+), 21 deletions(-) > > > > diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c > > b/drivers/gpu/drm/nouveau/nouveau_connector.c > > index 71c3bd8ff9f8..461111aaedc4 100644 > > --- a/drivers/gpu/drm/nouveau/nouveau_connector.c > > +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c > > @@ -414,9 +414,10 @@ nouveau_connector_ddc_detect(struct drm_connector > > *connector) > > struct nouveau_connector *nv_connector = nouveau_connector(connector); > > struct nouveau_drm *drm = nouveau_drm(dev); > > struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device); > > - struct nouveau_encoder *nv_encoder = NULL; > > + struct nouveau_encoder *nv_encoder = NULL, *found = NULL; > > struct drm_encoder *encoder; > > - int i, panel = -ENODEV; > > + int i, ret, panel = -ENODEV; > > + bool switcheroo_ddc = false; > > > > /* eDP panels need powering on by us (if the VBIOS doesn't default it > > * to on) before doing any AUX channel transactions. LVDS panel power > > @@ -433,37 +434,43 @@ nouveau_connector_ddc_detect(struct drm_connector > > *connector) > > drm_connector_for_each_possible_encoder(connector, encoder, i) { > > nv_encoder = nouveau_encoder(encoder); > > > > - if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { > > - int ret = nouveau_dp_detect(nv_encoder); > > + switch (nv_encoder->dcb->type) { > > + case DCB_OUTPUT_DP: > > + ret = nouveau_dp_detect(nv_encoder); > > if (ret == NOUVEAU_DP_MST) > > return NULL; > > - if (ret == NOUVEAU_DP_SST) > > - break; > > - } else > > - if ((vga_switcheroo_handler_flags() & > > - VGA_SWITCHEROO_CAN_SWITCH_DDC) && > > - nv_encoder->dcb->type == DCB_OUTPUT_LVDS && > > - nv_encoder->i2c) { > > - int ret; > > - vga_switcheroo_lock_ddc(dev->pdev); > > - ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50); > > - vga_switcheroo_unlock_ddc(dev->pdev); > > - if (ret) > > + else if (ret == NOUVEAU_DP_SST) > > + found = nv_encoder; > > + > > + break; > > + case DCB_OUTPUT_LVDS: > > + switcheroo_ddc = !!(vga_switcheroo_handler_flags() & > > + VGA_SWITCHEROO_CAN_SWITCH_DDC); > > + /* fall-through */ > > + default: > > + if (!nv_encoder->i2c) > > break; > > - } else > > - if (nv_encoder->i2c) { > > + > > + if (switcheroo_ddc) > > + vga_switcheroo_lock_ddc(dev->pdev); > > if (nvkm_probe_i2c(nv_encoder->i2c, 0x50)) > > - break; > > + found = nv_encoder; > > + if (switcheroo_ddc) > > + vga_switcheroo_unlock_ddc(dev->pdev); > > + > > + break; > > } > > + if (found) > > + break; > > The diff is rather messy due to the change to a switch, but after staring > at it for a while it does look correct to me. > > Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com> > and sorry for the mess.No problem! Honestly, if I was the one who made those changes I expect I would have broken this same bit of code as well :P> > > } > > > > /* eDP panel not detected, restore panel power GPIO to previous > > * state to avoid confusing the SOR for other output types. > > */ > > - if (!nv_encoder && panel == 0) > > + if (!found && panel == 0) > > nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); > > > > - return nv_encoder; > > + return found; > > } > > > > static struct nouveau_encoder * > > -- > > 2.17.1 > >
Possibly Parallel Threads
- [PATCH v2] drm/nouveau: Fix nouveau_connector_ddc_detect()
- [PATCH] drm/nouveau: Fix nouveau_connector_ddc_detect()
- [PATCH v2 5/9] drm/nouveau: Use drm_connector_for_each_possible_encoder()
- [PATCH v2 5/9] drm/nouveau: Use drm_connector_for_each_possible_encoder()
- [PATCH v5 07/12] drm/nouveau: Switch DDC when reading the EDID