Greg Clayton via llvm-dev
2020-Mar-02 21:48 UTC
[llvm-dev] Adding accelerator tables to existing linked DWARF files
> On Feb 28, 2020, at 11:25 PM, Fangrui Song via llvm-dev <llvm-dev at lists.llvm.org> wrote: > > On 2020-02-28, Greg Clayton via llvm-dev wrote: >> I am looking to create a tool that can add Apple or DWARF5 accelerator tables to fully linked executables that contain DWARF. This will help us benchmark how much accelerator tables can improve the debugging experience as debuggers don't need to manually index all of the debug info during debugging. > Is it for ELF, Mach-O, wasm, COFF, or any of the combinations?Yes, for any object files that LLVM currently supports. But I am looking to support ELF first as MachO already has these tables available since dsymutil already creates either Apple or DWARF accelerator tables. COFF and Wasm can come later.> >> Looking at how accelerator tables are currently emitted, they seem to be built up as DWARF is being created or linked, and then emitted using a subclass of DWARFEmitter. The only subclass if this right now that I see is one in dsymutil which ends up emitting everything using an AsmPrinter by eventually emitAppleAccelTable(...) from llvm/include/llvm/CodeGen/AccelTable.h. >> >> I spoke briefly with Shoaib on this subject and he suggested adding code to llvm-objcopy. I briefly looked through the code and from what I can tell, llvm-objcopy doesn't seem to have any DWARF abilities other than compressing DWARF sections. If we do add functionality to llvm-objcopy, are we ok pulling in DebugInfoDWARF and the LLVM object model? AFAICT the code for this tools has its own object file layer which doesn't match the full layer inside of LLVM (llvm::ObjectFile and DWARFContext). Also, no AsmPrinter objects are used in this codebase either. > > llvm-objcopy supports various ad-hoc binary manipulation features where each feature does a very > simple task. Neither llvm-objcopy nor GNU objcopy knows DWARF. --strip-debug, > --compress-debug-sections, --add-gnu-debuglink and --only-keep-debug have "debug" in their names but > these features don't need to parse DWARF. (GNU objcopy has a --debugging but that only works for > a.out and coff, not elf). > > Do we have a more suitable tool for such debugging functionality? dsymutil for ELF?dsymutil is such a tool, but it uses the llvm::ObjectFile layer and the llvm targets, so if you open a file that contains "armv7" architecture and the ARM target hasn't been built into your bistro, it will fail to open this binary with an error that says: No available targets are compatible with triple "arm-unknown-unknown" I ran into this with a recent gsym patch that is trying to fix the buildbots for testing, but it fails when the ARM targets are not enabled and I try to load the DWARF from an object file: http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio <http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio> And this is part of the reason for this email. I would love to not require llvm-gsymutil to require all LLVM targets to be there. DebugInfoDWARF doesn't need the targets, it just needs to know address byte size and endianness and it can parse the debug info in the DWARF. So my main question stands: do we want all tools that must manipulate DWARF to require the llvm::ObjectFile layer and all of the targets to be enabled just so that the object files can be parsed, or do we want to make lighter layer available, akin to what llvm-objcopy has, so more tools can take advantage of this lighter weight layer.> >> Looking at lld sources, is seems to use the DebugInfoDWARF library to some extent already. Not sure if this tool uses the standard LLVM object model or has all of its own emitters. Does lld use AsmPrinter at all? I don't see any mention of it in there. > > --gdb-index and diagnostics (line tables) use DebugInfoDWARF. I have a plan to implement .debug_names, which is similar to --gdb-index.That is great, and we will share code for this of course between the tool I write and the modifications to lld. Does lld use the llvm::ObjectFile layer? or does it have its own lighter weight layer?> >> dsymutil has a --update feature which seems to load all of the DWARF and pretend to link it all the while generating the new accelerator table data, but I fear using this would pull it way too much code (AsmPrinter, all targets required to load all object files types, the standard llvm object file model (not the lld or llvm-objcopy versions), targets, etc). >> >> My initial thoughts are: >> 1 - load a DWARFContext and iterate through the DWARF and build accelerator table data >> 2 - create the sections for the accelerator tables and either keep in memory or save to disk >> 3 - call functions to add the newly created sections to the binary >> >> #1 should be easy as long as I can use a DWARFContext from DebugInfoDWARF. >> #2 might need to be re-implemented using something other than an AsmPrinter? >> #3 can use llvm-objcopy code if needed since it can add sections? >> >> Any advice on how this can or should be implemented would be appreciated from anyone with experience. >> >> Greg Clayton >> > >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev> > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20200302/27d62eef/attachment.html>
Greg Clayton via llvm-dev
2020-Mar-02 23:20 UTC
[llvm-dev] Adding accelerator tables to existing linked DWARF files
On other options would be to make a new "llvm-dwarfld" tool, where most of the functionality would exist llvm/lib/DwarfLinker and other locations. The idea would be to do any post processing to DWARF using this tool. For accelerator tables, it could just create the new sections and then call "llvm-objcopy" to add them to the binary. This tool could eventually be used to optimize DWARF (dead strip code, remove unused types, unique types with ODR like llvm-dsymutil, etc).> On Mar 2, 2020, at 1:48 PM, Greg Clayton <clayborg at gmail.com> wrote: > > > >> On Feb 28, 2020, at 11:25 PM, Fangrui Song via llvm-dev <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: >> >> On 2020-02-28, Greg Clayton via llvm-dev wrote: >>> I am looking to create a tool that can add Apple or DWARF5 accelerator tables to fully linked executables that contain DWARF. This will help us benchmark how much accelerator tables can improve the debugging experience as debuggers don't need to manually index all of the debug info during debugging. >> Is it for ELF, Mach-O, wasm, COFF, or any of the combinations? > > Yes, for any object files that LLVM currently supports. But I am looking to support ELF first as MachO already has these tables available since dsymutil already creates either Apple or DWARF accelerator tables. COFF and Wasm can come later. > >> >>> Looking at how accelerator tables are currently emitted, they seem to be built up as DWARF is being created or linked, and then emitted using a subclass of DWARFEmitter. The only subclass if this right now that I see is one in dsymutil which ends up emitting everything using an AsmPrinter by eventually emitAppleAccelTable(...) from llvm/include/llvm/CodeGen/AccelTable.h. >>> >>> I spoke briefly with Shoaib on this subject and he suggested adding code to llvm-objcopy. I briefly looked through the code and from what I can tell, llvm-objcopy doesn't seem to have any DWARF abilities other than compressing DWARF sections. If we do add functionality to llvm-objcopy, are we ok pulling in DebugInfoDWARF and the LLVM object model? AFAICT the code for this tools has its own object file layer which doesn't match the full layer inside of LLVM (llvm::ObjectFile and DWARFContext). Also, no AsmPrinter objects are used in this codebase either. >> >> llvm-objcopy supports various ad-hoc binary manipulation features where each feature does a very >> simple task. Neither llvm-objcopy nor GNU objcopy knows DWARF. --strip-debug, >> --compress-debug-sections, --add-gnu-debuglink and --only-keep-debug have "debug" in their names but >> these features don't need to parse DWARF. (GNU objcopy has a --debugging but that only works for >> a.out and coff, not elf). >> >> Do we have a more suitable tool for such debugging functionality? dsymutil for ELF? > > dsymutil is such a tool, but it uses the llvm::ObjectFile layer and the llvm targets, so if you open a file that contains "armv7" architecture and the ARM target hasn't been built into your bistro, it will fail to open this binary with an error that says: > > No available targets are compatible with triple "arm-unknown-unknown" > > I ran into this with a recent gsym patch that is trying to fix the buildbots for testing, but it fails when the ARM targets are not enabled and I try to load the DWARF from an object file: > > http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio <http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio> > > And this is part of the reason for this email. I would love to not require llvm-gsymutil to require all LLVM targets to be there. DebugInfoDWARF doesn't need the targets, it just needs to know address byte size and endianness and it can parse the debug info in the DWARF. > > So my main question stands: do we want all tools that must manipulate DWARF to require the llvm::ObjectFile layer and all of the targets to be enabled just so that the object files can be parsed, or do we want to make lighter layer available, akin to what llvm-objcopy has, so more tools can take advantage of this lighter weight layer. > >> >>> Looking at lld sources, is seems to use the DebugInfoDWARF library to some extent already. Not sure if this tool uses the standard LLVM object model or has all of its own emitters. Does lld use AsmPrinter at all? I don't see any mention of it in there. >> >> --gdb-index and diagnostics (line tables) use DebugInfoDWARF. I have a plan to implement .debug_names, which is similar to --gdb-index. > > That is great, and we will share code for this of course between the tool I write and the modifications to lld. Does lld use the llvm::ObjectFile layer? or does it have its own lighter weight layer? > >> >>> dsymutil has a --update feature which seems to load all of the DWARF and pretend to link it all the while generating the new accelerator table data, but I fear using this would pull it way too much code (AsmPrinter, all targets required to load all object files types, the standard llvm object file model (not the lld or llvm-objcopy versions), targets, etc). >>> >>> My initial thoughts are: >>> 1 - load a DWARFContext and iterate through the DWARF and build accelerator table data >>> 2 - create the sections for the accelerator tables and either keep in memory or save to disk >>> 3 - call functions to add the newly created sections to the binary >>> >>> #1 should be easy as long as I can use a DWARFContext from DebugInfoDWARF. >>> #2 might need to be re-implemented using something other than an AsmPrinter? >>> #3 can use llvm-objcopy code if needed since it can add sections? >>> >>> Any advice on how this can or should be implemented would be appreciated from anyone with experience. >>> >>> Greg Clayton >>> >> >>> _______________________________________________ >>> LLVM Developers mailing list >>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev> >> >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev <https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20200302/b889e8ad/attachment-0001.html>
Eric Christopher via llvm-dev
2020-Mar-02 23:33 UTC
[llvm-dev] Adding accelerator tables to existing linked DWARF files
Which seems like what we'd want dsymutil to do anyhow? -eric On Mon, Mar 2, 2020 at 3:21 PM Greg Clayton via llvm-dev < llvm-dev at lists.llvm.org> wrote:> On other options would be to make a new "llvm-dwarfld" tool, where most of > the functionality would exist llvm/lib/DwarfLinker and other locations. The > idea would be to do any post processing to DWARF using this tool. For > accelerator tables, it could just create the new sections and then call > "llvm-objcopy" to add them to the binary. > > This tool could eventually be used to optimize DWARF (dead strip code, > remove unused types, unique types with ODR like llvm-dsymutil, etc). > > > On Mar 2, 2020, at 1:48 PM, Greg Clayton <clayborg at gmail.com> wrote: > > > > On Feb 28, 2020, at 11:25 PM, Fangrui Song via llvm-dev < > llvm-dev at lists.llvm.org> wrote: > > On 2020-02-28, Greg Clayton via llvm-dev wrote: > > I am looking to create a tool that can add Apple or DWARF5 accelerator > tables to fully linked executables that contain DWARF. This will help us > benchmark how much accelerator tables can improve the debugging experience > as debuggers don't need to manually index all of the debug info during > debugging. > > Is it for ELF, Mach-O, wasm, COFF, or any of the combinations? > > > Yes, for any object files that LLVM currently supports. But I am looking > to support ELF first as MachO already has these tables available since > dsymutil already creates either Apple or DWARF accelerator tables. COFF and > Wasm can come later. > > > Looking at how accelerator tables are currently emitted, they seem to be > built up as DWARF is being created or linked, and then emitted using a > subclass of DWARFEmitter. The only subclass if this right now that I see is > one in dsymutil which ends up emitting everything using an AsmPrinter by > eventually emitAppleAccelTable(...) from > llvm/include/llvm/CodeGen/AccelTable.h. > > I spoke briefly with Shoaib on this subject and he suggested adding code > to llvm-objcopy. I briefly looked through the code and from what I can > tell, llvm-objcopy doesn't seem to have any DWARF abilities other than > compressing DWARF sections. If we do add functionality to llvm-objcopy, are > we ok pulling in DebugInfoDWARF and the LLVM object model? AFAICT the code > for this tools has its own object file layer which doesn't match the full > layer inside of LLVM (llvm::ObjectFile and DWARFContext). Also, no > AsmPrinter objects are used in this codebase either. > > > llvm-objcopy supports various ad-hoc binary manipulation features where > each feature does a very > simple task. Neither llvm-objcopy nor GNU objcopy knows DWARF. > --strip-debug, > --compress-debug-sections, --add-gnu-debuglink and --only-keep-debug have > "debug" in their names but > these features don't need to parse DWARF. (GNU objcopy has a --debugging > but that only works for > a.out and coff, not elf). > > Do we have a more suitable tool for such debugging functionality? dsymutil > for ELF? > > > dsymutil is such a tool, but it uses the llvm::ObjectFile layer and the > llvm targets, so if you open a file that contains "armv7" architecture and > the ARM target hasn't been built into your bistro, it will fail to open > this binary with an error that says: > > No available targets are compatible with triple "arm-unknown-unknown" > > I ran into this with a recent gsym patch that is trying to fix the > buildbots for testing, but it fails when the ARM targets are not enabled > and I try to load the DWARF from an object file: > > > http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio > > And this is part of the reason for this email. I would love to not require > llvm-gsymutil to require all LLVM targets to be there. DebugInfoDWARF > doesn't need the targets, it just needs to know address byte size and > endianness and it can parse the debug info in the DWARF. > > So my main question stands: do we want all tools that must manipulate > DWARF to require the llvm::ObjectFile layer and all of the targets to be > enabled just so that the object files can be parsed, or do we want to make > lighter layer available, akin to what llvm-objcopy has, so more tools can > take advantage of this lighter weight layer. > > > Looking at lld sources, is seems to use the DebugInfoDWARF library to some > extent already. Not sure if this tool uses the standard LLVM object model > or has all of its own emitters. Does lld use AsmPrinter at all? I don't see > any mention of it in there. > > > --gdb-index and diagnostics (line tables) use DebugInfoDWARF. I have a > plan to implement .debug_names, which is similar to --gdb-index. > > > That is great, and we will share code for this of course between the tool > I write and the modifications to lld. Does lld use the llvm::ObjectFile > layer? or does it have its own lighter weight layer? > > > dsymutil has a --update feature which seems to load all of the DWARF and > pretend to link it all the while generating the new accelerator table data, > but I fear using this would pull it way too much code (AsmPrinter, all > targets required to load all object files types, the standard llvm object > file model (not the lld or llvm-objcopy versions), targets, etc). > > My initial thoughts are: > 1 - load a DWARFContext and iterate through the DWARF and build > accelerator table data > 2 - create the sections for the accelerator tables and either keep in > memory or save to disk > 3 - call functions to add the newly created sections to the binary > > #1 should be easy as long as I can use a DWARFContext from DebugInfoDWARF. > #2 might need to be re-implemented using something other than an > AsmPrinter? > #3 can use llvm-objcopy code if needed since it can add sections? > > Any advice on how this can or should be implemented would be appreciated > from anyone with experience. > > Greg Clayton > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20200302/15f934c6/attachment.html>
Alexey Lapshin via llvm-dev
2020-Mar-03 21:33 UTC
[llvm-dev] Adding accelerator tables to existing linked DWARF files
3/3/2020 12:48 AM, Greg Clayton via llvm-dev пишет:> > >> On Feb 28, 2020, at 11:25 PM, Fangrui Song via llvm-dev >> <llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org>> wrote: >> >> On 2020-02-28, Greg Clayton via llvm-dev wrote: >>> I am looking to create a tool that can add Apple or DWARF5 >>> accelerator tables to fully linked executables that contain DWARF. >>> This will help us benchmark how much accelerator tables can improve >>> the debugging experience as debuggers don't need to manually index >>> all of the debug info during debugging. >> Is it for ELF, Mach-O, wasm, COFF, or any of the combinations? > > Yes, for any object files that LLVM currently supports. But I am > looking to support ELF first as MachO already has these tables > available since dsymutil already creates either Apple or DWARF > accelerator tables. COFF and Wasm can come later. > >> >>> Looking at how accelerator tables are currently emitted, they seem >>> to be built up as DWARF is being created or linked, and then emitted >>> using a subclass of DWARFEmitter. The only subclass if this right >>> now that I see is one in dsymutil which ends up emitting everything >>> using an AsmPrinter by eventually emitAppleAccelTable(...) from >>> llvm/include/llvm/CodeGen/AccelTable.h. >>> >>> I spoke briefly with Shoaib on this subject and he suggested adding >>> code to llvm-objcopy. I briefly looked through the code and from >>> what I can tell, llvm-objcopy doesn't seem to have any DWARF >>> abilities other than compressing DWARF sections. If we do add >>> functionality to llvm-objcopy, are we ok pulling in DebugInfoDWARF >>> and the LLVM object model? AFAICT the code for this tools has its >>> own object file layer which doesn't match the full layer inside of >>> LLVM (llvm::ObjectFile and DWARFContext). Also, no AsmPrinter >>> objects are used in this codebase either. >> >> llvm-objcopy supports various ad-hoc binary manipulation features >> where each feature does a very >> simple task. Neither llvm-objcopy nor GNU objcopy knows DWARF. >> --strip-debug, >> --compress-debug-sections, --add-gnu-debuglink and --only-keep-debug >> have "debug" in their names but >> these features don't need to parse DWARF. (GNU objcopy has a >> --debugging but that only works for >> a.out and coff, not elf). >> >> Do we have a more suitable tool for such debugging functionality? >> dsymutil for ELF? > > dsymutil is such a tool, but it uses the llvm::ObjectFile layer and > the llvm targets, so if you open a file that contains "armv7" > architecture and the ARM target hasn't been built into your bistro, it > will fail to open this binary with an error that says: > > No available targets are compatible with triple "arm-unknown-unknown" > > I ran into this with a recent gsym patch that is trying to fix the > buildbots for testing, but it fails when the ARM targets are not > enabled and I try to load the DWARF from an object file: > > http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/63473/steps/test-check-all/logs/stdio > > And this is part of the reason for this email. I would love to not > require llvm-gsymutil to require all LLVM targets to be there. > DebugInfoDWARF doesn't need the targets, it just needs to know address > byte size and endianness and it can parse the debug info in the DWARF. >Hi Greg, dsymutil code was recently refactored so that it`s linking part was moved into lib/DWARFLinker library. As an advantage, it allows making DWARFLinker to not depend on ObjectFile : https://reviews.llvm.org/D75029 . It might make sense that your tool uses DWARFLinker library(probably extending it with new functionality) to work with DWARF. Alexey.> So my main question stands: do we want all tools that must manipulate > DWARF to require the llvm::ObjectFile layer and all of the targets to > be enabled just so that the object files can be parsed, or do we want > to make lighter layer available, akin to what llvm-objcopy has, so > more tools can take advantage of this lighter weight layer. > >> >>> Looking at lld sources, is seems to use the DebugInfoDWARF library >>> to some extent already. Not sure if this tool uses the standard LLVM >>> object model or has all of its own emitters. Does lld use AsmPrinter >>> at all? I don't see any mention of it in there. >> >> --gdb-index and diagnostics (line tables) use DebugInfoDWARF. I have >> a plan to implement .debug_names, which is similar to --gdb-index. > > That is great, and we will share code for this of course between the > tool I write and the modifications to lld. Does lld use the > llvm::ObjectFile layer? or does it have its own lighter weight layer? >> >>> dsymutil has a --update feature which seems to load all of the DWARF >>> and pretend to link it all the while generating the new accelerator >>> table data, but I fear using this would pull it way too much code >>> (AsmPrinter, all targets required to load all object files types, >>> the standard llvm object file model (not the lld or llvm-objcopy >>> versions), targets, etc). >>> >>> My initial thoughts are: >>> 1 - load a DWARFContext and iterate through the DWARF and build >>> accelerator table data >>> 2 - create the sections for the accelerator tables and either keep >>> in memory or save to disk >>> 3 - call functions to add the newly created sections to the binary >>> >>> #1 should be easy as long as I can use a DWARFContext from >>> DebugInfoDWARF. >>> #2 might need to be re-implemented using something other than an >>> AsmPrinter? >>> #3 can use llvm-objcopy code if needed since it can add sections? >>> >>> Any advice on how this can or should be implemented would be >>> appreciated from anyone with experience. >>> >>> Greg Clayton >>> >> >>> _______________________________________________ >>> LLVM Developers mailing list >>> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >>> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org <mailto:llvm-dev at lists.llvm.org> >> https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > https://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20200304/d585eb55/attachment.html>