David Blaikie via llvm-dev
2017-Jul-08 14:32 UTC
[llvm-dev] Swallowing of input in FileCheck
Ideally/the better integration with Buildbot would be to have these outputs referenced as "associated files" (it's been a while since I played with buildbot - I remember finding this and considering how it could be done, but not getting all the way through) so they'd come back as actual files on the build master, linked from the results page that you could click on to view/download. (similarly in the local output, having these files written to disk and the name of the file mentioned in the output would seem nice to me - some tests use the %t, etc, to create temporary files and you can see their names in the output, but some stream directly - it'd be great if the direct streaming still allowed the user to inspect the files along pipe chain) (aside: I'd love it if lit would tell me /which/ of the RUN commands it was running when it failed, or which one the output came from (in the case of a single RUN line having multiple commands... ) somehow - would simplify things a bit too) On Fri, Jul 7, 2017 at 4:24 PM George Karpenkov via llvm-dev < llvm-dev at lists.llvm.org> wrote:> What about having an environment variable FILECHECKER_VERBOSE=1? > This would not require substitutions, and could be even set automatically > by “lit” when launched with “-v”. > At least to me that would make debugging tests much easier. > > On Jul 7, 2017, at 3:05 PM, Daniel Dunbar <daniel_dunbar at apple.com> wrote: > > > On Jul 7, 2017, at 2:19 PM, Reid Kleckner <rnk at google.com> wrote: > > On Fri, Jul 7, 2017 at 1:20 PM, George Karpenkov via llvm-dev < > llvm-dev at lists.llvm.org> wrote: >> >> Thus, I propose modifying FileCheck default behavior to dump all >> swallowed output on stderr when the test has failed. >> Would there be any objections to such a change? >> > > Yes. > > >> I understand the concern that log files might become unnecessarily large, >> but since it would only be done for failed >> test I think the added readability would be worth it. >> > > I disagree, it would be too much output. During development, it's pretty > common to cause tens of tests to fail. I don't really want 10 entire > assembly files dumped into my console during incremental development. Our > test output is already long, and I wish it were shorter. > > > Could this be solved by having lit be intelligent about showing less > output when there are large numbers of test failures (w/o other output), > and truncating very large outputs? > > I do think there are situations where having the output just show up by > default locally could prevent needing to rerun a command, which is handy. > > I agree that this is a real problem when remote buildbots in different > configurations get involved. Locally debugging FileCheck failures is easy, > you just copy-paste the command like you said and pipe it to less. It's > only a pain when you aren't sure if a failure on a bot will reproduce > locally. So, I would be in favor of an option to lit that we enable on > buildslaves that dumps the output. We already have a '\bFileCheck\b' > substitution in lit. We'd just expand it to 'FileCheck --dump-on-failure' > or something on bots. > > > This sounds reasonable to me, no matter what on the above question. > > - Daniel > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170708/4483658c/attachment.html>
NAKAMURA Takumi via llvm-dev
2017-Jul-08 14:35 UTC
[llvm-dev] Swallowing of input in FileCheck
FYI, I had a diff. https://reviews.llvm.org/D20105 I am not interested to it atm, though. On Sat, Jul 8, 2017 at 11:33 PM David Blaikie via llvm-dev < llvm-dev at lists.llvm.org> wrote:> Ideally/the better integration with Buildbot would be to have these > outputs referenced as "associated files" (it's been a while since I played > with buildbot - I remember finding this and considering how it could be > done, but not getting all the way through) so they'd come back as actual > files on the build master, linked from the results page that you could > click on to view/download. > > (similarly in the local output, having these files written to disk and the > name of the file mentioned in the output would seem nice to me - some tests > use the %t, etc, to create temporary files and you can see their names in > the output, but some stream directly - it'd be great if the direct > streaming still allowed the user to inspect the files along pipe chain) > > (aside: I'd love it if lit would tell me /which/ of the RUN commands it > was running when it failed, or which one the output came from (in the case > of a single RUN line having multiple commands... ) somehow - would simplify > things a bit too) > > On Fri, Jul 7, 2017 at 4:24 PM George Karpenkov via llvm-dev < > llvm-dev at lists.llvm.org> wrote: > >> What about having an environment variable FILECHECKER_VERBOSE=1? >> This would not require substitutions, and could be even set automatically >> by “lit” when launched with “-v”. >> At least to me that would make debugging tests much easier. >> >> On Jul 7, 2017, at 3:05 PM, Daniel Dunbar <daniel_dunbar at apple.com> >> wrote: >> >> >> On Jul 7, 2017, at 2:19 PM, Reid Kleckner <rnk at google.com> wrote: >> >> On Fri, Jul 7, 2017 at 1:20 PM, George Karpenkov via llvm-dev < >> llvm-dev at lists.llvm.org> wrote: >>> >>> Thus, I propose modifying FileCheck default behavior to dump all >>> swallowed output on stderr when the test has failed. >>> Would there be any objections to such a change? >>> >> >> Yes. >> >> >>> I understand the concern that log files might become unnecessarily >>> large, but since it would only be done for failed >>> test I think the added readability would be worth it. >>> >> >> I disagree, it would be too much output. During development, it's pretty >> common to cause tens of tests to fail. I don't really want 10 entire >> assembly files dumped into my console during incremental development. Our >> test output is already long, and I wish it were shorter. >> >> >> Could this be solved by having lit be intelligent about showing less >> output when there are large numbers of test failures (w/o other output), >> and truncating very large outputs? >> >> I do think there are situations where having the output just show up by >> default locally could prevent needing to rerun a command, which is handy. >> >> I agree that this is a real problem when remote buildbots in different >> configurations get involved. Locally debugging FileCheck failures is easy, >> you just copy-paste the command like you said and pipe it to less. It's >> only a pain when you aren't sure if a failure on a bot will reproduce >> locally. So, I would be in favor of an option to lit that we enable on >> buildslaves that dumps the output. We already have a '\bFileCheck\b' >> substitution in lit. We'd just expand it to 'FileCheck --dump-on-failure' >> or something on bots. >> >> >> This sounds reasonable to me, no matter what on the above question. >> >> - Daniel >> >> >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170708/8c4c269f/attachment.html>
Daniel Dunbar via llvm-dev
2017-Jul-08 17:07 UTC
[llvm-dev] Swallowing of input in FileCheck
> On Jul 8, 2017, at 7:32 AM, David Blaikie <dblaikie at gmail.com> wrote: > > Ideally/the better integration with Buildbot would be to have these outputs referenced as "associated files" (it's been a while since I played with buildbot - I remember finding this and considering how it could be done, but not getting all the way through) so they'd come back as actual files on the build master, linked from the results page that you could click on to view/download. > > (similarly in the local output, having these files written to disk and the name of the file mentioned in the output would seem nice to me - some tests use the %t, etc, to create temporary files and you can see their names in the output, but some stream directly - it'd be great if the direct streaming still allowed the user to inspect the files along pipe chain) > > (aside: I'd love it if lit would tell me /which/ of the RUN commands it was running when it failed, or which one the output came from (in the case of a single RUN line having multiple commands... ) somehow - would simplify things a bit too)It actually will already do this if LLVM switched to the "internal test runner" (as opposed to the mode which runs the entire thing as one bash script). - Daniel> >> On Fri, Jul 7, 2017 at 4:24 PM George Karpenkov via llvm-dev <llvm-dev at lists.llvm.org> wrote: >> What about having an environment variable FILECHECKER_VERBOSE=1? >> This would not require substitutions, and could be even set automatically by “lit” when launched with “-v”. >> At least to me that would make debugging tests much easier. >>>> On Jul 7, 2017, at 3:05 PM, Daniel Dunbar <daniel_dunbar at apple.com> wrote: >>>> >>>> >>>> On Jul 7, 2017, at 2:19 PM, Reid Kleckner <rnk at google.com> wrote: >>>> >>>>> On Fri, Jul 7, 2017 at 1:20 PM, George Karpenkov via llvm-dev <llvm-dev at lists.llvm.org> wrote: >>>>> Thus, I propose modifying FileCheck default behavior to dump all swallowed output on stderr when the test has failed. >>>>> Would there be any objections to such a change? >>>> >>>> Yes. >>>> >>>>> I understand the concern that log files might become unnecessarily large, but since it would only be done for failed >>>>> test I think the added readability would be worth it. >>>> >>>> I disagree, it would be too much output. During development, it's pretty common to cause tens of tests to fail. I don't really want 10 entire assembly files dumped into my console during incremental development. Our test output is already long, and I wish it were shorter. >>> >>> Could this be solved by having lit be intelligent about showing less output when there are large numbers of test failures (w/o other output), and truncating very large outputs? >>> >>> I do think there are situations where having the output just show up by default locally could prevent needing to rerun a command, which is handy. >>> >>>> I agree that this is a real problem when remote buildbots in different configurations get involved. Locally debugging FileCheck failures is easy, you just copy-paste the command like you said and pipe it to less. It's only a pain when you aren't sure if a failure on a bot will reproduce locally. So, I would be in favor of an option to lit that we enable on buildslaves that dumps the output. We already have a '\bFileCheck\b' substitution in lit. We'd just expand it to 'FileCheck --dump-on-failure' or something on bots. >>> >>> This sounds reasonable to me, no matter what on the above question. >>> >>> - Daniel >>> >> >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170708/1e310b3d/attachment.html>
David Blaikie via llvm-dev
2017-Jul-08 18:18 UTC
[llvm-dev] Swallowing of input in FileCheck
On Sat, Jul 8, 2017 at 10:07 AM Daniel Dunbar <daniel_dunbar at apple.com> wrote:> > > On Jul 8, 2017, at 7:32 AM, David Blaikie <dblaikie at gmail.com> wrote: > > Ideally/the better integration with Buildbot would be to have these > outputs referenced as "associated files" (it's been a while since I played > with buildbot - I remember finding this and considering how it could be > done, but not getting all the way through) so they'd come back as actual > files on the build master, linked from the results page that you could > click on to view/download. > > (similarly in the local output, having these files written to disk and the > name of the file mentioned in the output would seem nice to me - some tests > use the %t, etc, to create temporary files and you can see their names in > the output, but some stream directly - it'd be great if the direct > streaming still allowed the user to inspect the files along pipe chain) > > (aside: I'd love it if lit would tell me /which/ of the RUN commands it > was running when it failed, or which one the output came from (in the case > of a single RUN line having multiple commands... ) somehow - would simplify > things a bit too) > > > It actually will already do this if LLVM switched to the "internal test > runner" (as opposed to the mode which runs the entire thing as one bash > script). >Is that the default on windows/platforms that might not have bash? Is there a CMake flag/config for it?> > - Daniel > > > On Fri, Jul 7, 2017 at 4:24 PM George Karpenkov via llvm-dev < > llvm-dev at lists.llvm.org> wrote: > >> What about having an environment variable FILECHECKER_VERBOSE=1? >> This would not require substitutions, and could be even set automatically >> by “lit” when launched with “-v”. >> At least to me that would make debugging tests much easier. >> >> On Jul 7, 2017, at 3:05 PM, Daniel Dunbar <daniel_dunbar at apple.com> >> wrote: >> >> >> On Jul 7, 2017, at 2:19 PM, Reid Kleckner <rnk at google.com> wrote: >> >> On Fri, Jul 7, 2017 at 1:20 PM, George Karpenkov via llvm-dev < >> llvm-dev at lists.llvm.org> wrote: >>> >>> Thus, I propose modifying FileCheck default behavior to dump all >>> swallowed output on stderr when the test has failed. >>> Would there be any objections to such a change? >>> >> >> Yes. >> >> >>> I understand the concern that log files might become unnecessarily >>> large, but since it would only be done for failed >>> test I think the added readability would be worth it. >>> >> >> I disagree, it would be too much output. During development, it's pretty >> common to cause tens of tests to fail. I don't really want 10 entire >> assembly files dumped into my console during incremental development. Our >> test output is already long, and I wish it were shorter. >> >> >> Could this be solved by having lit be intelligent about showing less >> output when there are large numbers of test failures (w/o other output), >> and truncating very large outputs? >> >> I do think there are situations where having the output just show up by >> default locally could prevent needing to rerun a command, which is handy. >> >> I agree that this is a real problem when remote buildbots in different >> configurations get involved. Locally debugging FileCheck failures is easy, >> you just copy-paste the command like you said and pipe it to less. It's >> only a pain when you aren't sure if a failure on a bot will reproduce >> locally. So, I would be in favor of an option to lit that we enable on >> buildslaves that dumps the output. We already have a '\bFileCheck\b' >> substitution in lit. We'd just expand it to 'FileCheck --dump-on-failure' >> or something on bots. >> >> >> This sounds reasonable to me, no matter what on the above question. >> >> - Daniel >> >> >> _______________________________________________ >> LLVM Developers mailing list >> llvm-dev at lists.llvm.org >> http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20170708/77630eb7/attachment.html>