Michael S. Tsirkin
2023-Apr-03 17:53 UTC
[virtio-dev] [PATCH v2 1/2] virtio-blk: migrate to the latest patchset version
On Thu, Mar 30, 2023 at 05:49:52PM -0400, Dmitry Fomichev wrote:> The merged patch series to support zoned block devices in virtio-blk > is not the most up to date version. The merged patch can be found at > > https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev at wdc.com/ > > , but the latest and reviewed version is > > https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev at wdc.com/What happened here is that it was not sent to correct people or lists. v2 happened to draw my attention by chance, I missed the interface change and I did not see later ones and merged v2. To: Jens Axboe <axboe at kernel.dk>, linux-block at vger.kernel.org, Damien Le Moal <damien.lemoal at opensource.wdc.com>, Stefan Hajnoczi <stefanha at gmail.com>, Hannes Reinecke <hare at suse.de>, Sam Li <faithilikerun at gmail.com> Cc: virtio-dev at lists.oasis-open.org, Dmitry Fomichev <dmitry.fomichev at wdc.com> while: $ ./scripts/get_maintainer.pl -f drivers/block/virtio_blk.c "Michael S. Tsirkin" <mst at redhat.com> (maintainer:VIRTIO CORE AND NET DRIVERS) Jason Wang <jasowang at redhat.com> (maintainer:VIRTIO CORE AND NET DRIVERS) Paolo Bonzini <pbonzini at redhat.com> (reviewer:VIRTIO BLOCK AND SCSI DRIVERS) Stefan Hajnoczi <stefanha at redhat.com> (reviewer:VIRTIO BLOCK AND SCSI DRIVERS) Jens Axboe <axboe at kernel.dk> (maintainer:BLOCK LAYER) virtualization at lists.linux-foundation.org (open list:VIRTIO CORE AND NET DRIVERS) linux-block at vger.kernel.org (open list:BLOCK LAYER) linux-kernel at vger.kernel.org (open list)> The differences between the two are mostly cleanups, but there is one > change that is very important in terms of compatibility with the > approved virtio-zbd specification. > > Before it was approved, the OASIS virtio spec had a change in > VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the > current virtio-blk driver code. In the running code, the status is > the first byte of the in-header that is followed by some pad bytes > and the u64 that carries the sector at which the data has been written > to the zone back to the driver, aka the append sector. > > This layout turned out to be problematic for implementing in QEMU and > the request status byte has been eventually made the last byte of the > in-header. The current code doesn't expect that and this causes the > append sector value always come as zero to the block layer. This needs > to be fixed ASAP. > > Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") > Cc: stable at vger.kernel.org > Signed-off-by: Dmitry Fomichev <dmitry.fomichev at wdc.com> > Reviewed-by: Stefan Hajnoczi <stefanha at redhat.com> > Reviewed-by: Damien Le Moal <damien.lemoal at opensource.wdc.com> > --- > drivers/block/virtio_blk.c | 238 +++++++++++++++++++++----------- > include/uapi/linux/virtio_blk.h | 18 +-- > 2 files changed, 166 insertions(+), 90 deletions(-) > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > index 2723eede6f21..4f0dbbb3d4a5 100644 > --- a/drivers/block/virtio_blk.c > +++ b/drivers/block/virtio_blk.c > @@ -96,16 +96,14 @@ struct virtblk_req { > > /* > * The zone append command has an extended in header. > - * The status field in zone_append_in_hdr must have > - * the same offset in virtblk_req as the non-zoned > - * status field above. > + * The status field in zone_append_in_hdr must always > + * be the last byte. > */ > struct { > + __virtio64 sector; > u8 status; > - u8 reserved[7]; > - __le64 append_sector; > - } zone_append_in_hdr; > - }; > + } zone_append; > + } in_hdr; > > size_t in_hdr_len; > > @@ -154,7 +152,7 @@ static int virtblk_add_req(struct virtqueue *vq, struct virtblk_req *vbr) > sgs[num_out + num_in++] = vbr->sg_table.sgl; > } > > - sg_init_one(&in_hdr, &vbr->status, vbr->in_hdr_len); > + sg_init_one(&in_hdr, &vbr->in_hdr.status, vbr->in_hdr_len); > sgs[num_out + num_in++] = &in_hdr; > > return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC); > @@ -242,11 +240,14 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev, > struct request *req, > struct virtblk_req *vbr) > { > - size_t in_hdr_len = sizeof(vbr->status); > + size_t in_hdr_len = sizeof(vbr->in_hdr.status); > bool unmap = false; > u32 type; > u64 sector = 0; > > + if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) && op_is_zone_mgmt(req_op(req))) > + return BLK_STS_NOTSUPP; > + > /* Set fields for all request types */ > vbr->out_hdr.ioprio = cpu_to_virtio32(vdev, req_get_ioprio(req)); > > @@ -287,7 +288,7 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev, > case REQ_OP_ZONE_APPEND: > type = VIRTIO_BLK_T_ZONE_APPEND; > sector = blk_rq_pos(req); > - in_hdr_len = sizeof(vbr->zone_append_in_hdr); > + in_hdr_len = sizeof(vbr->in_hdr.zone_append); > break; > case REQ_OP_ZONE_RESET: > type = VIRTIO_BLK_T_ZONE_RESET; > @@ -297,7 +298,10 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev, > type = VIRTIO_BLK_T_ZONE_RESET_ALL; > break; > case REQ_OP_DRV_IN: > - /* Out header already filled in, nothing to do */ > + /* > + * Out header has already been prepared by the caller (virtblk_get_id() > + * or virtblk_submit_zone_report()), nothing to do here. > + */ > return 0; > default: > WARN_ON_ONCE(1); > @@ -318,16 +322,28 @@ static blk_status_t virtblk_setup_cmd(struct virtio_device *vdev, > return 0; > } > > +/* > + * The status byte is always the last byte of the virtblk request > + * in-header. This helper fetches its value for all in-header formats > + * that are currently defined. > + */ > +static inline u8 virtblk_vbr_status(struct virtblk_req *vbr) > +{ > + return *((u8 *)&vbr->in_hdr + vbr->in_hdr_len - 1); > +} > + > static inline void virtblk_request_done(struct request *req) > { > struct virtblk_req *vbr = blk_mq_rq_to_pdu(req); > - blk_status_t status = virtblk_result(vbr->status); > + blk_status_t status = virtblk_result(virtblk_vbr_status(vbr)); > + struct virtio_blk *vblk = req->mq_hctx->queue->queuedata; > > virtblk_unmap_data(req, vbr); > virtblk_cleanup_cmd(req); > > if (req_op(req) == REQ_OP_ZONE_APPEND) > - req->__sector = le64_to_cpu(vbr->zone_append_in_hdr.append_sector); > + req->__sector = virtio64_to_cpu(vblk->vdev, > + vbr->in_hdr.zone_append.sector); > > blk_mq_end_request(req, status); > } > @@ -355,7 +371,7 @@ static int virtblk_handle_req(struct virtio_blk_vq *vq, > > if (likely(!blk_should_fake_timeout(req->q)) && > !blk_mq_complete_request_remote(req) && > - !blk_mq_add_to_batch(req, iob, vbr->status, > + !blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), > virtblk_complete_batch)) > virtblk_request_done(req); > req_done++; > @@ -550,7 +566,6 @@ static void virtio_queue_rqs(struct request **rqlist) > #ifdef CONFIG_BLK_DEV_ZONED > static void *virtblk_alloc_report_buffer(struct virtio_blk *vblk, > unsigned int nr_zones, > - unsigned int zone_sectors, > size_t *buflen) > { > struct request_queue *q = vblk->disk->queue; > @@ -558,7 +573,7 @@ static void *virtblk_alloc_report_buffer(struct virtio_blk *vblk, > void *buf; > > nr_zones = min_t(unsigned int, nr_zones, > - get_capacity(vblk->disk) >> ilog2(zone_sectors)); > + get_capacity(vblk->disk) >> ilog2(vblk->zone_sectors)); > > bufsize = sizeof(struct virtio_blk_zone_report) + > nr_zones * sizeof(struct virtio_blk_zone_descriptor); > @@ -592,7 +607,7 @@ static int virtblk_submit_zone_report(struct virtio_blk *vblk, > return PTR_ERR(req); > > vbr = blk_mq_rq_to_pdu(req); > - vbr->in_hdr_len = sizeof(vbr->status); > + vbr->in_hdr_len = sizeof(vbr->in_hdr.status); > vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_ZONE_REPORT); > vbr->out_hdr.sector = cpu_to_virtio64(vblk->vdev, sector); > > @@ -601,7 +616,7 @@ static int virtblk_submit_zone_report(struct virtio_blk *vblk, > goto out; > > blk_execute_rq(req, false); > - err = blk_status_to_errno(virtblk_result(vbr->status)); > + err = blk_status_to_errno(virtblk_result(vbr->in_hdr.status)); > out: > blk_mq_free_request(req); > return err; > @@ -609,29 +624,72 @@ static int virtblk_submit_zone_report(struct virtio_blk *vblk, > > static int virtblk_parse_zone(struct virtio_blk *vblk, > struct virtio_blk_zone_descriptor *entry, > - unsigned int idx, unsigned int zone_sectors, > - report_zones_cb cb, void *data) > + unsigned int idx, report_zones_cb cb, void *data) > { > struct blk_zone zone = { }; > > - if (entry->z_type != VIRTIO_BLK_ZT_SWR && > - entry->z_type != VIRTIO_BLK_ZT_SWP && > - entry->z_type != VIRTIO_BLK_ZT_CONV) { > - dev_err(&vblk->vdev->dev, "invalid zone type %#x\n", > - entry->z_type); > - return -EINVAL; > + zone.start = virtio64_to_cpu(vblk->vdev, entry->z_start); > + if (zone.start + vblk->zone_sectors <= get_capacity(vblk->disk)) > + zone.len = vblk->zone_sectors; > + else > + zone.len = get_capacity(vblk->disk) - zone.start; > + zone.capacity = virtio64_to_cpu(vblk->vdev, entry->z_cap); > + zone.wp = virtio64_to_cpu(vblk->vdev, entry->z_wp); > + > + switch (entry->z_type) { > + case VIRTIO_BLK_ZT_SWR: > + zone.type = BLK_ZONE_TYPE_SEQWRITE_REQ; > + break; > + case VIRTIO_BLK_ZT_SWP: > + zone.type = BLK_ZONE_TYPE_SEQWRITE_PREF; > + break; > + case VIRTIO_BLK_ZT_CONV: > + zone.type = BLK_ZONE_TYPE_CONVENTIONAL; > + break; > + default: > + dev_err(&vblk->vdev->dev, "zone %llu: invalid type %#x\n", > + zone.start, entry->z_type); > + return -EIO; > } > > - zone.type = entry->z_type; > - zone.cond = entry->z_state; > - zone.len = zone_sectors; > - zone.capacity = le64_to_cpu(entry->z_cap); > - zone.start = le64_to_cpu(entry->z_start); > - if (zone.cond == BLK_ZONE_COND_FULL) > + switch (entry->z_state) { > + case VIRTIO_BLK_ZS_EMPTY: > + zone.cond = BLK_ZONE_COND_EMPTY; > + break; > + case VIRTIO_BLK_ZS_CLOSED: > + zone.cond = BLK_ZONE_COND_CLOSED; > + break; > + case VIRTIO_BLK_ZS_FULL: > + zone.cond = BLK_ZONE_COND_FULL; > zone.wp = zone.start + zone.len; > - else > - zone.wp = le64_to_cpu(entry->z_wp); > + break; > + case VIRTIO_BLK_ZS_EOPEN: > + zone.cond = BLK_ZONE_COND_EXP_OPEN; > + break; > + case VIRTIO_BLK_ZS_IOPEN: > + zone.cond = BLK_ZONE_COND_IMP_OPEN; > + break; > + case VIRTIO_BLK_ZS_NOT_WP: > + zone.cond = BLK_ZONE_COND_NOT_WP; > + break; > + case VIRTIO_BLK_ZS_RDONLY: > + zone.cond = BLK_ZONE_COND_READONLY; > + zone.wp = ULONG_MAX; > + break; > + case VIRTIO_BLK_ZS_OFFLINE: > + zone.cond = BLK_ZONE_COND_OFFLINE; > + zone.wp = ULONG_MAX; > + break; > + default: > + dev_err(&vblk->vdev->dev, "zone %llu: invalid condition %#x\n", > + zone.start, entry->z_state); > + return -EIO; > + } > > + /* > + * The callback below checks the validity of the reported > + * entry data, no need to further validate it here. > + */ > return cb(&zone, idx, data); > } > > @@ -641,39 +699,47 @@ static int virtblk_report_zones(struct gendisk *disk, sector_t sector, > { > struct virtio_blk *vblk = disk->private_data; > struct virtio_blk_zone_report *report; > - unsigned int zone_sectors = vblk->zone_sectors; > - unsigned int nz, i; > - int ret, zone_idx = 0; > + unsigned long long nz, i; > size_t buflen; > + unsigned int zone_idx = 0; > + int ret; > > if (WARN_ON_ONCE(!vblk->zone_sectors)) > return -EOPNOTSUPP; > > - report = virtblk_alloc_report_buffer(vblk, nr_zones, > - zone_sectors, &buflen); > + report = virtblk_alloc_report_buffer(vblk, nr_zones, &buflen); > if (!report) > return -ENOMEM; > > + mutex_lock(&vblk->vdev_mutex); > + > + if (!vblk->vdev) { > + ret = -ENXIO; > + goto fail_report; > + } > + > while (zone_idx < nr_zones && sector < get_capacity(vblk->disk)) { > memset(report, 0, buflen); > > ret = virtblk_submit_zone_report(vblk, (char *)report, > buflen, sector); > - if (ret) { > - if (ret > 0) > - ret = -EIO; > - goto out_free; > - } > - nz = min((unsigned int)le64_to_cpu(report->nr_zones), nr_zones); > + if (ret) > + goto fail_report; > + > + nz = min_t(u64, virtio64_to_cpu(vblk->vdev, report->nr_zones), > + nr_zones); > if (!nz) > break; > > for (i = 0; i < nz && zone_idx < nr_zones; i++) { > ret = virtblk_parse_zone(vblk, &report->zones[i], > - zone_idx, zone_sectors, cb, data); > + zone_idx, cb, data); > if (ret) > - goto out_free; > - sector = le64_to_cpu(report->zones[i].z_start) + zone_sectors; > + goto fail_report; > + > + sector = virtio64_to_cpu(vblk->vdev, > + report->zones[i].z_start) + > + vblk->zone_sectors; > zone_idx++; > } > } > @@ -682,7 +748,8 @@ static int virtblk_report_zones(struct gendisk *disk, sector_t sector, > ret = zone_idx; > else > ret = -EINVAL; > -out_free: > +fail_report: > + mutex_unlock(&vblk->vdev_mutex); > kvfree(report); > return ret; > } > @@ -691,20 +758,28 @@ static void virtblk_revalidate_zones(struct virtio_blk *vblk) > { > u8 model; > > - if (!vblk->zone_sectors) > - return; > - > virtio_cread(vblk->vdev, struct virtio_blk_config, > zoned.model, &model); > - if (!blk_revalidate_disk_zones(vblk->disk, NULL)) > - set_capacity_and_notify(vblk->disk, 0); > + switch (model) { > + default: > + dev_err(&vblk->vdev->dev, "unknown zone model %d\n", model); > + fallthrough; > + case VIRTIO_BLK_Z_NONE: > + case VIRTIO_BLK_Z_HA: > + disk_set_zoned(vblk->disk, BLK_ZONED_NONE); > + return; > + case VIRTIO_BLK_Z_HM: > + WARN_ON_ONCE(!vblk->zone_sectors); > + if (!blk_revalidate_disk_zones(vblk->disk, NULL)) > + set_capacity_and_notify(vblk->disk, 0); > + } > } > > static int virtblk_probe_zoned_device(struct virtio_device *vdev, > struct virtio_blk *vblk, > struct request_queue *q) > { > - u32 v; > + u32 v, wg; > u8 model; > int ret; > > @@ -713,16 +788,11 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev, > > switch (model) { > case VIRTIO_BLK_Z_NONE: > + case VIRTIO_BLK_Z_HA: > + /* Present the host-aware device as non-zoned */ > return 0; > case VIRTIO_BLK_Z_HM: > break; > - case VIRTIO_BLK_Z_HA: > - /* > - * Present the host-aware device as a regular drive. > - * TODO It is possible to add an option to make it appear > - * in the system as a zoned drive. > - */ > - return 0; > default: > dev_err(&vdev->dev, "unsupported zone model %d\n", model); > return -EINVAL; > @@ -735,32 +805,31 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev, > > virtio_cread(vdev, struct virtio_blk_config, > zoned.max_open_zones, &v); > - disk_set_max_open_zones(vblk->disk, le32_to_cpu(v)); > - > - dev_dbg(&vdev->dev, "max open zones = %u\n", le32_to_cpu(v)); > + disk_set_max_open_zones(vblk->disk, v); > + dev_dbg(&vdev->dev, "max open zones = %u\n", v); > > virtio_cread(vdev, struct virtio_blk_config, > zoned.max_active_zones, &v); > - disk_set_max_active_zones(vblk->disk, le32_to_cpu(v)); > - dev_dbg(&vdev->dev, "max active zones = %u\n", le32_to_cpu(v)); > + disk_set_max_active_zones(vblk->disk, v); > + dev_dbg(&vdev->dev, "max active zones = %u\n", v); > > virtio_cread(vdev, struct virtio_blk_config, > - zoned.write_granularity, &v); > - if (!v) { > + zoned.write_granularity, &wg); > + if (!wg) { > dev_warn(&vdev->dev, "zero write granularity reported\n"); > return -ENODEV; > } > - blk_queue_physical_block_size(q, le32_to_cpu(v)); > - blk_queue_io_min(q, le32_to_cpu(v)); > + blk_queue_physical_block_size(q, wg); > + blk_queue_io_min(q, wg); > > - dev_dbg(&vdev->dev, "write granularity = %u\n", le32_to_cpu(v)); > + dev_dbg(&vdev->dev, "write granularity = %u\n", wg); > > /* > * virtio ZBD specification doesn't require zones to be a power of > * two sectors in size, but the code in this driver expects that. > */ > - virtio_cread(vdev, struct virtio_blk_config, zoned.zone_sectors, &v); > - vblk->zone_sectors = le32_to_cpu(v); > + virtio_cread(vdev, struct virtio_blk_config, zoned.zone_sectors, > + &vblk->zone_sectors); > if (vblk->zone_sectors == 0 || !is_power_of_2(vblk->zone_sectors)) { > dev_err(&vdev->dev, > "zoned device with non power of two zone size %u\n", > @@ -783,8 +852,15 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev, > dev_warn(&vdev->dev, "zero max_append_sectors reported\n"); > return -ENODEV; > } > - blk_queue_max_zone_append_sectors(q, le32_to_cpu(v)); > - dev_dbg(&vdev->dev, "max append sectors = %u\n", le32_to_cpu(v)); > + if ((v << SECTOR_SHIFT) < wg) { > + dev_err(&vdev->dev, > + "write granularity %u exceeds max_append_sectors %u limit\n", > + wg, v); > + return -ENODEV; > + } > + > + blk_queue_max_zone_append_sectors(q, v); > + dev_dbg(&vdev->dev, "max append sectors = %u\n", v); > } > > return ret; > @@ -794,6 +870,7 @@ static inline bool virtblk_has_zoned_feature(struct virtio_device *vdev) > { > return virtio_has_feature(vdev, VIRTIO_BLK_F_ZONED); > } > + > #else > > /* > @@ -801,9 +878,11 @@ static inline bool virtblk_has_zoned_feature(struct virtio_device *vdev) > * We only need to define a few symbols to avoid compilation errors. > */ > #define virtblk_report_zones NULL > + > static inline void virtblk_revalidate_zones(struct virtio_blk *vblk) > { > } > + > static inline int virtblk_probe_zoned_device(struct virtio_device *vdev, > struct virtio_blk *vblk, struct request_queue *q) > { > @@ -831,7 +910,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str) > return PTR_ERR(req); > > vbr = blk_mq_rq_to_pdu(req); > - vbr->in_hdr_len = sizeof(vbr->status); > + vbr->in_hdr_len = sizeof(vbr->in_hdr.status); > vbr->out_hdr.type = cpu_to_virtio32(vblk->vdev, VIRTIO_BLK_T_GET_ID); > vbr->out_hdr.sector = 0; > > @@ -840,7 +919,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str) > goto out; > > blk_execute_rq(req, false); > - err = blk_status_to_errno(virtblk_result(vbr->status)); > + err = blk_status_to_errno(virtblk_result(vbr->in_hdr.status)); > out: > blk_mq_free_request(req); > return err; > @@ -1504,9 +1583,6 @@ static int virtblk_probe(struct virtio_device *vdev) > goto out_cleanup_disk; > } > > - dev_info(&vdev->dev, "blk config size: %zu\n", > - sizeof(struct virtio_blk_config)); > - > err = device_add_disk(&vdev->dev, vblk->disk, virtblk_attr_groups); > if (err) > goto out_cleanup_disk; > diff --git a/include/uapi/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h > index 5af2a0300bb9..3744e4da1b2a 100644 > --- a/include/uapi/linux/virtio_blk.h > +++ b/include/uapi/linux/virtio_blk.h > @@ -140,11 +140,11 @@ struct virtio_blk_config { > > /* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */ > struct virtio_blk_zoned_characteristics { > - __le32 zone_sectors; > - __le32 max_open_zones; > - __le32 max_active_zones; > - __le32 max_append_sectors; > - __le32 write_granularity; > + __virtio32 zone_sectors; > + __virtio32 max_open_zones; > + __virtio32 max_active_zones; > + __virtio32 max_append_sectors; > + __virtio32 write_granularity; > __u8 model; > __u8 unused2[3]; > } zoned; > @@ -241,11 +241,11 @@ struct virtio_blk_outhdr { > */ > struct virtio_blk_zone_descriptor { > /* Zone capacity */ > - __le64 z_cap; > + __virtio64 z_cap; > /* The starting sector of the zone */ > - __le64 z_start; > + __virtio64 z_start; > /* Zone write pointer position in sectors */ > - __le64 z_wp; > + __virtio64 z_wp; > /* Zone type */ > __u8 z_type; > /* Zone state */ > @@ -254,7 +254,7 @@ struct virtio_blk_zone_descriptor { > }; > > struct virtio_blk_zone_report { > - __le64 nr_zones; > + __virtio64 nr_zones; > __u8 reserved[56]; > struct virtio_blk_zone_descriptor zones[]; > }; > -- > 2.34.1 > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: virtio-dev-unsubscribe at lists.oasis-open.org > For additional commands, e-mail: virtio-dev-help at lists.oasis-open.org > >