Linux Virtualization - Jan 2021 - [PATCH 2/6] mm: let user decide page reporting option

On Tue, Jan 5, 2021 at 7:48 PM Liang Li <liliang324 at gmail.com>
wrote:
>
> Some key parameters for page reporting are now hard coded, different
> users of the framework may have their special requirements, make
> these parameter configrable and let the user decide them.
>
> Cc: Alexander Duyck <alexander.h.duyck at linux.intel.com>
> Cc: Mel Gorman <mgorman at techsingularity.net>
> Cc: Andrea Arcangeli <aarcange at redhat.com>
> Cc: Dan Williams <dan.j.williams at intel.com>
> Cc: Dave Hansen <dave.hansen at intel.com>
> Cc: David Hildenbrand <david at redhat.com>
> Cc: Michal Hocko <mhocko at kernel.org>
> Cc: Andrew Morton <akpm at linux-foundation.org>
> Cc: Alex Williamson <alex.williamson at redhat.com>
> Cc: Michael S. Tsirkin <mst at redhat.com>
> Cc: Liang Li <liliang324 at gmail.com>
> Signed-off-by: Liang Li <liliangleo at didiglobal.com>
> ---
>  drivers/virtio/virtio_balloon.c |  3 +++
>  include/linux/page_reporting.h  |  3 +++
>  mm/page_reporting.c             | 13 +++++++++----
>  mm/page_reporting.h             |  6 +++---
>  4 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/virtio/virtio_balloon.c
b/drivers/virtio/virtio_balloon.c
> index 8985fc2cea86..684bcc39ef5a 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -993,6 +993,9 @@ static int virtballoon_probe(struct virtio_device
*vdev)
>                         goto out_unregister_oom;
>                 }
>
> +               vb->pr_dev_info.mini_order = pageblock_order;
> +               vb->pr_dev_info.batch_size = 16 * 1024 * 1024; /* 16M */
> +               vb->pr_dev_info.delay_jiffies = 2 * HZ; /* 2 seconds */
>                 err = page_reporting_register(&vb->pr_dev_info);
>                 if (err)
>                         goto out_unregister_oom;
> diff --git a/include/linux/page_reporting.h
b/include/linux/page_reporting.h
> index 3b99e0ec24f2..63e1e9fbcaa2 100644
> --- a/include/linux/page_reporting.h
> +++ b/include/linux/page_reporting.h
> @@ -13,6 +13,9 @@ struct page_reporting_dev_info {
>         int (*report)(struct page_reporting_dev_info *prdev,
>                       struct scatterlist *sg, unsigned int nents);
>
> +       unsigned long batch_size;
> +       unsigned long delay_jiffies;
> +       int mini_order;
>         /* work struct for processing reports */
>         struct delayed_work work;
>
> diff --git a/mm/page_reporting.c b/mm/page_reporting.c
> index 694df981ddd2..39bc6a9d7b73 100644
> --- a/mm/page_reporting.c
> +++ b/mm/page_reporting.c
> @@ -13,6 +13,7 @@
>  #define PAGE_REPORTING_DELAY   (2 * HZ)
>  static struct page_reporting_dev_info __rcu *pr_dev_info __read_mostly;
>  unsigned long page_report_batch_size  __read_mostly = 16 * 1024 * 1024UL;
> +int page_report_mini_order = pageblock_order;
>
>  enum {
>         PAGE_REPORTING_IDLE = 0,
> @@ -44,7 +45,7 @@ __page_reporting_request(struct page_reporting_dev_info
*prdev)
>          * now we are limiting this to running no more than once every
>          * couple of seconds.
>          */
> -       schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY);
> +       schedule_delayed_work(&prdev->work,
prdev->delay_jiffies);
>  }
>
So this ends up being the reason why you needed to add the batch size
value. However I don't really see it working as expected since you
could essentially have 1 page freed 4M times that could trigger your
page zeroing logic. So for example if a NIC is processing frames and
ends up freeing and then reallocating some small batch of pages this
could would be running often even though there isn't really all that
many pages that needed zeroing.
>  /* notify prdev of free page reporting request */
> @@ -230,7 +231,7 @@ page_reporting_process_zone(struct
page_reporting_dev_info *prdev,
>
>         /* Generate minimum watermark to be able to guarantee progress */
>         watermark = low_wmark_pages(zone) +
> -                   (PAGE_REPORTING_CAPACITY <<
PAGE_REPORTING_MIN_ORDER);
> +                   (PAGE_REPORTING_CAPACITY <<
prdev->mini_order);
>
>         /*
>          * Cancel request if insufficient free memory or if we failed
With the page order being able to be greatly reduced this could have a
significant impact on if this code really has any value. Previously we
were able to guarantee a pretty significant number of higher order
pages free. With this we might only be guaranteeing something like 32
4K pages which is pretty small compared to what can end up being
pulled out at the higher end.
> @@ -240,7 +241,7 @@ page_reporting_process_zone(struct
page_reporting_dev_info *prdev,
>                 return err;
>
>         /* Process each free list starting from lowest order/mt */
> -       for (order = PAGE_REPORTING_MIN_ORDER; order < MAX_ORDER;
order++) {
> +       for (order = prdev->mini_order; order < MAX_ORDER; order++) {
>                 for (mt = 0; mt < MIGRATE_TYPES; mt++) {
>                         /* We do not pull pages from the isolate free list
*/
>                         if (is_migrate_isolate(mt))
> @@ -307,7 +308,7 @@ static void page_reporting_process(struct work_struct
*work)
>          */
>         state = atomic_cmpxchg(&prdev->state, state,
PAGE_REPORTING_IDLE);
>         if (state == PAGE_REPORTING_REQUESTED)
> -               schedule_delayed_work(&prdev->work,
PAGE_REPORTING_DELAY);
> +               schedule_delayed_work(&prdev->work,
prdev->delay_jiffies);
>  }
>
>  static DEFINE_MUTEX(page_reporting_mutex);
> @@ -335,6 +336,8 @@ int page_reporting_register(struct
page_reporting_dev_info *prdev)
>         /* Assign device to allow notifications */
>         rcu_assign_pointer(pr_dev_info, prdev);
>
> +       page_report_mini_order = prdev->mini_order;
> +       page_report_batch_size = prdev->batch_size;
>         /* enable page reporting notification */
>         if (!static_key_enabled(&page_reporting_enabled)) {
>                 static_branch_enable(&page_reporting_enabled);
> @@ -352,6 +355,8 @@ void page_reporting_unregister(struct
page_reporting_dev_info *prdev)
>         mutex_lock(&page_reporting_mutex);
>
>         if (rcu_access_pointer(pr_dev_info) == prdev) {
> +               if (static_key_enabled(&page_reporting_enabled))
> +                       static_branch_disable(&page_reporting_enabled);
>                 /* Disable page reporting notification */
>                 RCU_INIT_POINTER(pr_dev_info, NULL);
>                 synchronize_rcu();
If we are going to use this we are using it. Once we NULL out the
prdev that should stop page reporting from running. We shouldn't be
relying on the static key.
> diff --git a/mm/page_reporting.h b/mm/page_reporting.h
> index b8fb3bbb345f..86ac6ffad970 100644
> --- a/mm/page_reporting.h
> +++ b/mm/page_reporting.h
> @@ -9,9 +9,9 @@
>  #include <linux/slab.h>
>  #include <linux/pgtable.h>
>  #include <linux/scatterlist.h>
> +#include <linux/page_reporting.h>
>
> -#define PAGE_REPORTING_MIN_ORDER       pageblock_order
> -
> +extern int page_report_mini_order;
>  extern unsigned long page_report_batch_size;
>
>  #ifdef CONFIG_PAGE_REPORTING
> @@ -42,7 +42,7 @@ static inline void page_reporting_notify_free(unsigned
int order)
>                 return;
>
>         /* Determine if we have crossed reporting threshold */
> -       if (order < PAGE_REPORTING_MIN_ORDER)
> +       if (order < page_report_mini_order)
>                 return;
This is another case where it might make sense to look at placing the
code in __page_reporting_notify if we are going to allow this to be a
dynamically configurable value.
>         batch_size += (1 << order) << PAGE_SHIFT;
> --
> 2.18.2
>
>