Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 0/5] vhost-scsi: Add support for host virtualized target
From: Nicholas Bellinger <nab at linux-iscsi.org> Hello Anthony & Co, This is the fourth installment to add host virtualized target support for the mainline tcm_vhost fabric driver using Linux v3.6-rc into QEMU 1.3.0-rc. The series is available directly from the following git branch: git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git vhost-scsi-for-1.3 Note the code is cut against yesterday's QEMU head, and dispite the name of the tree is based upon mainline qemu.org git code + has thus far been running overnight with > 100K IOPs small block 4k workloads using v3.6-rc2+ based target code with RAMDISK_DR backstores. Other than some minor fuzz between jumping from QEMU 1.2.0 -> 1.2.50, this series is functionally identical to what's been posted for vhost-scsi RFC-v3 to qemu-devel. Please consider applying these patches for an initial vhost-scsi merge into QEMU 1.3.0-rc code, or let us know what else you'd like to see addressed for this series to in order to merge. Thank you! --nab Nicholas Bellinger (2): monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param virtio-scsi: Set max_target=0 during vhost-scsi operation Stefan Hajnoczi (3): vhost: Pass device path to vhost_dev_init() vhost-scsi: add -vhost-scsi host device for use with tcm-vhost virtio-scsi: Add start/stop functionality for vhost-scsi configure | 10 +++ hw/Makefile.objs | 1 + hw/qdev-properties.c | 41 +++++++++++ hw/vhost-scsi.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vhost-scsi.h | 62 ++++++++++++++++ hw/vhost.c | 5 +- hw/vhost.h | 3 +- hw/vhost_net.c | 2 +- hw/virtio-pci.c | 2 + hw/virtio-scsi.c | 55 ++++++++++++++- hw/virtio-scsi.h | 1 + monitor.c | 18 +++++ monitor.h | 1 + net.c | 18 ----- net.h | 2 - net/socket.c | 2 +- net/tap.c | 4 +- qemu-common.h | 1 + qemu-config.c | 19 +++++ qemu-options.hx | 4 + vl.c | 18 +++++ 21 files changed, 431 insertions(+), 28 deletions(-) create mode 100644 hw/vhost-scsi.c create mode 100644 hw/vhost-scsi.h -- 1.7.2.5
Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 1/5] monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
From: Nicholas Bellinger <nab at linux-iscsi.org> This patch renames+moves the net_handle_fd_param() caller used to obtain a file descriptor from either qemu_parse_fd() (the normal case) or from monitor_get_fd() (migration case) into a generically prefixed monitor_handle_fd_param() to be used by vhost-scsi code. Also update net/[socket,tap].c consumers to use the new prefix. Reported-by: Michael S. Tsirkin <mst at redhat.com> Cc: Michael S. Tsirkin <mst at redhat.com> Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini at redhat.com> Cc: Anthony Liguori <aliguori at us.ibm.com> Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> --- monitor.c | 18 ++++++++++++++++++ monitor.h | 1 + net.c | 18 ------------------ net.h | 2 -- net/socket.c | 2 +- net/tap.c | 4 ++-- 6 files changed, 22 insertions(+), 23 deletions(-) diff --git a/monitor.c b/monitor.c index 49dccfe..0641efe 100644 --- a/monitor.c +++ b/monitor.c @@ -2389,6 +2389,24 @@ int monitor_get_fd(Monitor *mon, const char *fdname) return -1; } +int monitor_handle_fd_param(Monitor *mon, const char *fdname) +{ + int fd; + + if (!qemu_isdigit(fdname[0]) && mon) { + + fd = monitor_get_fd(mon, fdname); + if (fd == -1) { + error_report("No file descriptor named %s found", fdname); + return -1; + } + } else { + fd = qemu_parse_fd(fdname); + } + + return fd; +} + /* mon_cmds and info_cmds would be sorted at runtime */ static mon_cmd_t mon_cmds[] = { #include "hmp-commands.h" diff --git a/monitor.h b/monitor.h index 5f4de1b..d557e97 100644 --- a/monitor.h +++ b/monitor.h @@ -65,6 +65,7 @@ int monitor_read_block_device_key(Monitor *mon, const char *device, void *opaque); int monitor_get_fd(Monitor *mon, const char *fdname); +int monitor_handle_fd_param(Monitor *mon, const char *fdname); void monitor_vprintf(Monitor *mon, const char *fmt, va_list ap) GCC_FMT_ATTR(2, 0); diff --git a/net.c b/net.c index 60043dd..e5d25d4 100644 --- a/net.c +++ b/net.c @@ -522,24 +522,6 @@ int qemu_find_nic_model(NICInfo *nd, const char * const *models, return -1; } -int net_handle_fd_param(Monitor *mon, const char *param) -{ - int fd; - - if (!qemu_isdigit(param[0]) && mon) { - - fd = monitor_get_fd(mon, param); - if (fd == -1) { - error_report("No file descriptor named %s found", param); - return -1; - } - } else { - fd = qemu_parse_fd(param); - } - - return fd; -} - static int net_init_nic(const NetClientOptions *opts, const char *name, NetClientState *peer) { diff --git a/net.h b/net.h index 2975056..04fda1d 100644 --- a/net.h +++ b/net.h @@ -168,8 +168,6 @@ int qmp_netdev_add(Monitor *mon, const QDict *qdict, QObject **ret); void qdev_set_nic_properties(DeviceState *dev, NICInfo *nd); -int net_handle_fd_param(Monitor *mon, const char *param); - #define POLYNOMIAL 0x04c11db6 unsigned compute_mcast_idx(const uint8_t *ep); diff --git a/net/socket.c b/net/socket.c index c172c24..7c602e4 100644 --- a/net/socket.c +++ b/net/socket.c @@ -629,7 +629,7 @@ int net_init_socket(const NetClientOptions *opts, const char *name, if (sock->has_fd) { int fd; - fd = net_handle_fd_param(cur_mon, sock->fd); + fd = monitor_handle_fd_param(cur_mon, sock->fd); if (fd == -1 || !net_socket_fd_init(peer, "socket", name, fd, 1)) { return -1; } diff --git a/net/tap.c b/net/tap.c index 1971525..a88ae8f 100644 --- a/net/tap.c +++ b/net/tap.c @@ -610,7 +610,7 @@ int net_init_tap(const NetClientOptions *opts, const char *name, return -1; } - fd = net_handle_fd_param(cur_mon, tap->fd); + fd = monitor_handle_fd_param(cur_mon, tap->fd); if (fd == -1) { return -1; } @@ -686,7 +686,7 @@ int net_init_tap(const NetClientOptions *opts, const char *name, int vhostfd; if (tap->has_vhostfd) { - vhostfd = net_handle_fd_param(cur_mon, tap->vhostfd); + vhostfd = monitor_handle_fd_param(cur_mon, tap->vhostfd); if (vhostfd == -1) { return -1; } -- 1.7.2.5
Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 2/5] vhost: Pass device path to vhost_dev_init()
From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> The path to /dev/vhost-net is currently hardcoded in vhost_dev_init(). This needs to be changed so that /dev/vhost-scsi can be used. Pass in the device path instead of hardcoding it. Signed-off-by: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini at redhat.com> Cc: Michael S. Tsirkin <mst at redhat.com> Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> --- hw/vhost.c | 5 +++-- hw/vhost.h | 3 ++- hw/vhost_net.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/hw/vhost.c b/hw/vhost.c index 0fd8da8..d0ce5aa 100644 --- a/hw/vhost.c +++ b/hw/vhost.c @@ -747,14 +747,15 @@ static void vhost_eventfd_del(MemoryListener *listener, { } -int vhost_dev_init(struct vhost_dev *hdev, int devfd, bool force) +int vhost_dev_init(struct vhost_dev *hdev, int devfd, const char *devpath, + bool force) { uint64_t features; int r; if (devfd >= 0) { hdev->control = devfd; } else { - hdev->control = open("/dev/vhost-net", O_RDWR); + hdev->control = open(devpath, O_RDWR); if (hdev->control < 0) { return -errno; } diff --git a/hw/vhost.h b/hw/vhost.h index 80e64df..0c47229 100644 --- a/hw/vhost.h +++ b/hw/vhost.h @@ -44,7 +44,8 @@ struct vhost_dev { bool force; }; -int vhost_dev_init(struct vhost_dev *hdev, int devfd, bool force); +int vhost_dev_init(struct vhost_dev *hdev, int devfd, const char *devpath, + bool force); void vhost_dev_cleanup(struct vhost_dev *hdev); bool vhost_dev_query(struct vhost_dev *hdev, VirtIODevice *vdev); int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev); diff --git a/hw/vhost_net.c b/hw/vhost_net.c index ecaa22d..df2c4a3 100644 --- a/hw/vhost_net.c +++ b/hw/vhost_net.c @@ -109,7 +109,7 @@ struct vhost_net *vhost_net_init(NetClientState *backend, int devfd, (1 << VHOST_NET_F_VIRTIO_NET_HDR); net->backend = r; - r = vhost_dev_init(&net->dev, devfd, force); + r = vhost_dev_init(&net->dev, devfd, "/dev/vhost-net", force); if (r < 0) { goto fail; } -- 1.7.2.5
Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 3/5] vhost-scsi: add -vhost-scsi host device for use with tcm-vhost
From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> This patch adds a new type of host device that drives the vhost_scsi device. The syntax to add vhost-scsi is: qemu -vhost-scsi id=vhost-scsi0,wwpn=...,tpgt=123 The virtio-scsi emulated device will make use of vhost-scsi to process virtio-scsi requests inside the kernel and hand them to the in-kernel SCSI target stack using the tcm_vhost fabric driver. The tcm_vhost driver was merged into the upstream linux kernel for 3.6-rc2, and the commit can be found here: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=057cbf49a1f08297 Changelog v2 -> v3: - Move qdev_prop_vhost_scsi + DEFINE_PROP_VHOST_SCSI defs into vhost-scsi.[c,h] (reported by MST) - Add enum vhost_scsi_vq_list for VHostSCSI->vqs[] enumeration (reported by MST) - Add missing braces around single like if statement to following QEMU style (reported by Blue Swirl) - Change vhost_scsi_target->vhost_wwpn to char *, in order to drop casts to pstrcpy in vhost_scsi_start() + vhost_scsi_stop() (reported by Blue Swirl) - Change VHOST_SCSI_GET_ABI_VERSION to 'int' type (MST) - Fix 4 byte alignment of vhost_scsi_target (MST) - Convert fprintf(stderr, ...) usage to -> error_report() (reported by MST) - Do explict memset of backend before calling VHOST_SCSI_CLEAR_ENDPOINT in vhost_scsi_stop() (reported by MST) - Add support for vhostfd passing in vhost_scsi_add() (reported by MST) - Change vhost_scsi_add() to use monitor_handle_fd_param() (reported by MST) Changelog v1 -> v2: - Expose ABI version via VHOST_SCSI_GET_ABI_VERSION + use Rev 0 as starting point for v3.6-rc code (Stefan + ALiguori + nab) - Fix upstream qemu conflict in hw/qdev-properties.c - Make GET_ABI_VERSION use int (nab + mst) - Fix vhost-scsi case lables in configure (reported by paolo) - Convert qdev_prop_vhost_scsi to use ->get() + ->set() following qdev_prop_netdev (reported by paolo) - Fix typo in qemu-options.hx definition of vhost-scsi (reported by paolo) Changelog v0 -> v1: - Add VHOST_SCSI_SET_ENDPOINT call (stefan) - Enable vhost notifiers for multiple queues (Zhi) - clear vhost-scsi endpoint on stopped (Zhi) - Add CONFIG_VHOST_SCSI for QEMU build configure (nab) - Rename vhost_vring_target -> vhost_scsi_target (mst + nab) - Add support for VHOST_SCSI_GET_ABI_VERSION ioctl (aliguori + nab) Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> Cc: Anthony Liguori <aliguori at us.ibm.com> Cc: Paolo Bonzini <pbonzini at redhat.com> Cc: Michael S. Tsirkin <mst at redhat.com> Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> --- configure | 10 +++ hw/Makefile.objs | 1 + hw/qdev-properties.c | 41 +++++++++++ hw/vhost-scsi.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vhost-scsi.h | 62 ++++++++++++++++ qemu-common.h | 1 + qemu-config.c | 19 +++++ qemu-options.hx | 4 + vl.c | 18 +++++ 9 files changed, 346 insertions(+), 0 deletions(-) create mode 100644 hw/vhost-scsi.c create mode 100644 hw/vhost-scsi.h diff --git a/configure b/configure index f0dbc03..1f03202 100755 --- a/configure +++ b/configure @@ -168,6 +168,7 @@ libattr="" xfs="" vhost_net="no" +vhost_scsi="no" kvm="no" gprof="no" debug_tcg="no" @@ -513,6 +514,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vhost_scsi="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -818,6 +820,10 @@ for opt do ;; --enable-vhost-net) vhost_net="yes" ;; + --disable-vhost-scsi) vhost_scsi="no" + ;; + --enable-vhost-scsi) vhost_scsi="yes" + ;; --disable-opengl) opengl="no" ;; --enable-opengl) opengl="yes" @@ -3116,6 +3122,7 @@ echo "posix_madvise $posix_madvise" echo "uuid support $uuid" echo "libcap-ng support $cap_ng" echo "vhost-net support $vhost_net" +echo "vhost-scsi support $vhost_scsi" echo "Trace backend $trace_backend" echo "Trace output file $trace_file-<pid>" echo "spice support $spice" @@ -3828,6 +3835,9 @@ case "$target_arch2" in if test "$vhost_net" = "yes" ; then echo "CONFIG_VHOST_NET=y" >> $config_target_mak fi + if test "$vhost_scsi" = "yes" ; then + echo "CONFIG_VHOST_SCSI=y" >> $config_target_mak + fi fi esac case "$target_arch2" in diff --git a/hw/Makefile.objs b/hw/Makefile.objs index 3ba5dd0..6ab75ec 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -169,6 +169,7 @@ obj-$(CONFIG_VIRTIO) += virtio.o virtio-blk.o virtio-balloon.o virtio-net.o obj-$(CONFIG_VIRTIO) += virtio-serial-bus.o virtio-scsi.o obj-$(CONFIG_SOFTMMU) += vhost_net.o obj-$(CONFIG_VHOST_NET) += vhost.o +obj-$(CONFIG_VHOST_SCSI) += vhost-scsi.o obj-$(CONFIG_REALLY_VIRTFS) += 9pfs/ obj-$(CONFIG_NO_PCI) += pci-stub.o obj-$(CONFIG_VGA) += vga.o diff --git a/hw/qdev-properties.c b/hw/qdev-properties.c index 8aca0d4..8b505ca 100644 --- a/hw/qdev-properties.c +++ b/hw/qdev-properties.c @@ -4,6 +4,7 @@ #include "blockdev.h" #include "hw/block-common.h" #include "net/hub.h" +#include "vhost-scsi.h" void *qdev_get_prop_ptr(DeviceState *dev, Property *prop) { @@ -696,6 +697,46 @@ PropertyInfo qdev_prop_vlan = { .set = set_vlan, }; +/* --- vhost-scsi --- */ + +static int parse_vhost_scsi_dev(DeviceState *dev, const char *str, void **ptr) +{ + VHostSCSI *p; + + p = find_vhost_scsi(str); + if (p == NULL) { + return -ENOENT; + } + + *ptr = p; + return 0; +} + +static const char *print_vhost_scsi_dev(void *ptr) +{ + VHostSCSI *p = ptr; + + return (p) ? vhost_scsi_get_id(p) : "<null>"; +} + +static void get_vhost_scsi_dev(Object *obj, Visitor *v, void *opaque, + const char *name, Error **errp) +{ + get_pointer(obj, v, opaque, print_vhost_scsi_dev, name, errp); +} + +static void set_vhost_scsi_dev(Object *obj, Visitor *v, void *opaque, + const char *name, Error **errp) +{ + set_pointer(obj, v, opaque, parse_vhost_scsi_dev, name, errp); +} + +PropertyInfo qdev_prop_vhost_scsi = { + .name = "vhost-scsi", + .get = get_vhost_scsi_dev, + .set = set_vhost_scsi_dev, +}; + /* --- pointer --- */ /* Not a proper property, just for dirty hacks. TODO Remove it! */ diff --git a/hw/vhost-scsi.c b/hw/vhost-scsi.c new file mode 100644 index 0000000..96da2fc --- /dev/null +++ b/hw/vhost-scsi.c @@ -0,0 +1,190 @@ +/* + * vhost_scsi host device + * + * Copyright IBM, Corp. 2011 + * + * Authors: + * Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> + * + * Changes for QEMU mainline + tcm_vhost kernel upstream: + * Nicholas Bellinger <nab at risingtidesystems.com> + * + * This work is licensed under the terms of the GNU LGPL, version 2 or later. + * See the COPYING.LIB file in the top-level directory. + * + */ + +#include <sys/ioctl.h> +#include "config.h" +#include "qemu-queue.h" +#include "monitor.h" +#include "vhost-scsi.h" +#include "vhost.h" + +struct VHostSCSI { + const char *id; + const char *wwpn; + uint16_t tpgt; + int vhostfd; + struct vhost_dev dev; + struct vhost_virtqueue vqs[VHOST_SCSI_VQ_NUM]; + QLIST_ENTRY(VHostSCSI) list; +}; + +static QLIST_HEAD(, VHostSCSI) vhost_scsi_list + QLIST_HEAD_INITIALIZER(vhost_scsi_list); + +VHostSCSI *find_vhost_scsi(const char *id) +{ + VHostSCSI *vs; + + QLIST_FOREACH(vs, &vhost_scsi_list, list) { + if (!strcmp(id, vs->id)) { + return vs; + } + } + return NULL; +} + +const char *vhost_scsi_get_id(VHostSCSI *vs) +{ + return vs->id; +} + +int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev) +{ + int ret, abi_version; + struct vhost_scsi_target backend; + + if (!vhost_dev_query(&vs->dev, vdev)) { + return -ENOTSUP; + } + + vs->dev.nvqs = VHOST_SCSI_VQ_NUM; + vs->dev.vqs = vs->vqs; + + ret = vhost_dev_enable_notifiers(&vs->dev, vdev); + if (ret < 0) { + return ret; + } + + ret = vhost_dev_start(&vs->dev, vdev); + if (ret < 0) { + return ret; + } + + ret = ioctl(vs->dev.control, VHOST_SCSI_GET_ABI_VERSION, &abi_version); + if (ret < 0) { + ret = -errno; + vhost_dev_stop(&vs->dev, vdev); + return ret; + } + if (abi_version > VHOST_SCSI_ABI_VERSION) { + error_report("vhost-scsi: The running tcm_vhost kernel abi_version:" + " %d is greater than vhost_scsi userspace supports: %d, please" + " upgrade your version of QEMU\n", abi_version, + VHOST_SCSI_ABI_VERSION); + ret = -ENOSYS; + vhost_dev_stop(&vs->dev, vdev); + return ret; + } + fprintf(stdout, "TCM_vHost ABI version: %d\n", abi_version); + + memset(&backend, 0, sizeof(backend)); + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->wwpn); + backend.vhost_tpgt = vs->tpgt; + ret = ioctl(vs->dev.control, VHOST_SCSI_SET_ENDPOINT, &backend); + if (ret < 0) { + ret = -errno; + vhost_dev_stop(&vs->dev, vdev); + return ret; + } + + return 0; +} + +void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev) +{ + int ret; + struct vhost_scsi_target backend; + + memset(&backend, 0, sizeof(backend)); + pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->wwpn); + backend.vhost_tpgt = vs->tpgt; + ret = ioctl(vs->dev.control, VHOST_SCSI_CLEAR_ENDPOINT, &backend); + if (ret < 0) { + error_report("vhost-scsi: Failed to clear endpoint\n"); + } + + vhost_dev_stop(&vs->dev, vdev); +} + +static VHostSCSI *vhost_scsi_add(const char *id, const char *wwpn, + uint16_t tpgt, const char *vhostfd_str) +{ + VHostSCSI *vs; + int ret; + + vs = g_malloc0(sizeof(*vs)); + if (!vs) { + error_report("vhost-scsi: unable to allocate *vs\n"); + return NULL; + } + vs->vhostfd = -1; + + if (vhostfd_str) { + vs->vhostfd = monitor_handle_fd_param(cur_mon, vhostfd_str); + if (vs->vhostfd == -1) { + error_report("vhost-scsi: unable to parse vs->vhostfd\n"); + return NULL; + } + } + /* TODO set up vhost-scsi device and bind to tcm_vhost/$wwpm/tpgt_$tpgt */ + ret = vhost_dev_init(&vs->dev, vs->vhostfd, "/dev/vhost-scsi", false); + if (ret < 0) { + error_report("vhost-scsi: vhost initialization failed: %s\n", + strerror(-ret)); + return NULL; + } + vs->dev.backend_features = 0; + vs->dev.acked_features = 0; + + vs->id = g_strdup(id); + vs->wwpn = g_strdup(wwpn); + vs->tpgt = tpgt; + QLIST_INSERT_HEAD(&vhost_scsi_list, vs, list); + + return vs; +} + +VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts) +{ + const char *id; + const char *wwpn, *vhostfd; + uint64_t tpgt; + + id = qemu_opts_id(opts); + if (!id) { + error_report("vhost-scsi: no id specified\n"); + return NULL; + } + if (find_vhost_scsi(id)) { + error_report("duplicate vhost-scsi: \"%s\"\n", id); + return NULL; + } + + wwpn = qemu_opt_get(opts, "wwpn"); + if (!wwpn) { + error_report("vhost-scsi: \"%s\" missing wwpn\n", id); + return NULL; + } + + tpgt = qemu_opt_get_number(opts, "tpgt", UINT64_MAX); + if (tpgt > UINT16_MAX) { + error_report("vhost-scsi: \"%s\" needs a 16-bit tpgt\n", id); + return NULL; + } + vhostfd = qemu_opt_get(opts, "vhostfd"); + + return vhost_scsi_add(id, wwpn, tpgt, vhostfd); +} diff --git a/hw/vhost-scsi.h b/hw/vhost-scsi.h new file mode 100644 index 0000000..68de51a --- /dev/null +++ b/hw/vhost-scsi.h @@ -0,0 +1,62 @@ +/* + * vhost_scsi host device + * + * Copyright IBM, Corp. 2011 + * + * Authors: + * Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> + * + * This work is licensed under the terms of the GNU LGPL, version 2 or later. + * See the COPYING.LIB file in the top-level directory. + * + */ + +#ifndef VHOST_SCSI_H +#define VHOST_SCSI_H + +#include "qemu-common.h" +#include "qemu-option.h" +#include "qdev.h" + +/* + * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. + * + * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + + * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage + */ + +#define VHOST_SCSI_ABI_VERSION 0 + +/* TODO #include <linux/vhost.h> properly */ +/* For VHOST_SCSI_SET_ENDPOINT/VHOST_SCSI_CLEAR_ENDPOINT ioctl */ +struct vhost_scsi_target { + int abi_version; + char vhost_wwpn[224]; + unsigned short vhost_tpgt; + unsigned short reserved; +}; + +enum vhost_scsi_vq_list { + VHOST_SCSI_VQ_CTL = 0, + VHOST_SCSI_VQ_EVT = 1, + VHOST_SCSI_VQ_IO = 2, + VHOST_SCSI_VQ_NUM = 3, +}; + +#define VHOST_VIRTIO 0xAF +#define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) +#define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) +#define VHOST_SCSI_GET_ABI_VERSION _IOW(VHOST_VIRTIO, 0x42, int) + +extern PropertyInfo qdev_prop_vhost_scsi; + +#define DEFINE_PROP_VHOST_SCSI(_n, _s, _f) \ + DEFINE_PROP(_n, _s, _f, qdev_prop_vhost_scsi, VHostSCSI*) + +VHostSCSI *find_vhost_scsi(const char *id); +const char *vhost_scsi_get_id(VHostSCSI *vs); +VHostSCSI *vhost_scsi_add_opts(QemuOpts *opts); +int vhost_scsi_start(VHostSCSI *vs, VirtIODevice *vdev); +void vhost_scsi_stop(VHostSCSI *vs, VirtIODevice *vdev); + +#endif diff --git a/qemu-common.h b/qemu-common.h index f9deca6..ec36002 100644 --- a/qemu-common.h +++ b/qemu-common.h @@ -280,6 +280,7 @@ typedef struct EventNotifier EventNotifier; typedef struct VirtIODevice VirtIODevice; typedef struct QEMUSGList QEMUSGList; typedef struct SHPCDevice SHPCDevice; +typedef struct VHostSCSI VHostSCSI; typedef uint64_t pcibus_t; diff --git a/qemu-config.c b/qemu-config.c index 5c3296b..2d4884c 100644 --- a/qemu-config.c +++ b/qemu-config.c @@ -626,6 +626,24 @@ QemuOptsList qemu_boot_opts = { }, }; +QemuOptsList qemu_vhost_scsi_opts = { + .name = "vhost-scsi", + .head = QTAILQ_HEAD_INITIALIZER(qemu_vhost_scsi_opts.head), + .desc = { + { + .name = "wwpn", + .type = QEMU_OPT_STRING, + }, { + .name = "tpgt", + .type = QEMU_OPT_NUMBER, + }, { + .name = "vhostfd", + .type = QEMU_OPT_STRING, + }, + { /* end of list */ } + }, +}; + static QemuOptsList *vm_config_groups[32] = { &qemu_drive_opts, &qemu_chardev_opts, @@ -641,6 +659,7 @@ static QemuOptsList *vm_config_groups[32] = { &qemu_machine_opts, &qemu_boot_opts, &qemu_iscsi_opts, + &qemu_vhost_scsi_opts, NULL, }; diff --git a/qemu-options.hx b/qemu-options.hx index 47cb5bd..4e7a03c 100644 --- a/qemu-options.hx +++ b/qemu-options.hx @@ -565,6 +565,10 @@ possible drivers and properties, use @code{-device ?} and ETEXI DEFHEADING() +DEF("vhost-scsi", HAS_ARG, QEMU_OPTION_vhost_scsi, + "-vhost-scsi wwpn=string0,tpgt=number0\n" + " add vhost-scsi device\n", + QEMU_ARCH_ALL) DEFHEADING(File system options:) diff --git a/vl.c b/vl.c index 91076f0..61c8284 100644 --- a/vl.c +++ b/vl.c @@ -144,6 +144,7 @@ int main(int argc, char **argv) #include "qemu-options.h" #include "qmp-commands.h" #include "main-loop.h" +#include "hw/vhost-scsi.h" #ifdef CONFIG_VIRTFS #include "fsdev/qemu-fsdev.h" #endif @@ -1858,6 +1859,14 @@ static int fsdev_init_func(QemuOpts *opts, void *opaque) } #endif +static int vhost_scsi_init_func(QemuOpts *opts, void *opaque) +{ + if (!vhost_scsi_add_opts(opts)) { + return -1; + } + return 0; +} + static int mon_init_func(QemuOpts *opts, void *opaque) { CharDriverState *chr; @@ -2617,6 +2626,11 @@ int main(int argc, char **argv, char **envp) } break; #endif + case QEMU_OPTION_vhost_scsi: + if (!qemu_opts_parse(qemu_find_opts("vhost-scsi"), optarg, 0)) { + exit(1); + } + break; #ifdef CONFIG_SLIRP case QEMU_OPTION_tftp: legacy_tftp_prefix = optarg; @@ -3337,6 +3351,10 @@ int main(int argc, char **argv, char **envp) exit(1); } #endif + if (qemu_opts_foreach(qemu_find_opts("vhost-scsi"), + vhost_scsi_init_func, NULL, 1)) { + exit(1); + } os_daemonize(); -- 1.7.2.5
Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi
From: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> This patch starts and stops vhost as the virtio device transitions through its status phases. Vhost can only be started once the guest reports its driver has successfully initialized, which means the virtqueues have been set up by the guest. v3: - Add vhost-scsi.h include for DEFINE_PROP_VHOST_SCSI (mst + nab) - Move vhost-scsi related struct members ahead of *cmd_vqs[0] within VirtIOSCSI definition. (paolo + nab) v2: - Squash virtio-scsi: use the vhost-scsi host device from stefan (nab) - Fix up virtio_scsi_properties[] conflict w/ upstream qemu (nab) - Drop usage of to_virtio_scsi() in virtio_scsi_set_status() (reported by paolo) - Use modern VirtIOSCSIConf define in virtio-scsi.h (reported by paolo) - Use s->conf->vhost_scsi instead of proxyconf->vhost_scsi in virtio_scsi_init() (reported by paolo) - Only register QEMU SCSI bus is vhost-scsi is not active (reported by paolo) Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> Cc: Michael S. Tsirkin <mst at redhat.com> Cc: Paolo Bonzini <pbonzini at redhat.com> Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> --- hw/virtio-pci.c | 2 ++ hw/virtio-scsi.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ hw/virtio-scsi.h | 1 + 3 files changed, 52 insertions(+), 0 deletions(-) diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c index 125eded..8ec7cf1 100644 --- a/hw/virtio-pci.c +++ b/hw/virtio-pci.c @@ -22,6 +22,7 @@ #include "virtio-net.h" #include "virtio-serial.h" #include "virtio-scsi.h" +#include "vhost-scsi.h" #include "pci.h" #include "qemu-error.h" #include "msi.h" @@ -1036,6 +1037,7 @@ static void virtio_scsi_exit_pci(PCIDevice *pci_dev) } static Property virtio_scsi_properties[] = { + DEFINE_PROP_VHOST_SCSI("vhost-scsi", VirtIOPCIProxy, scsi.vhost_scsi), DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, DEV_NVECTORS_UNSPECIFIED), DEFINE_VIRTIO_SCSI_PROPERTIES(VirtIOPCIProxy, host_features, scsi), diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c index 5f737ac..edda097 100644 --- a/hw/virtio-scsi.c +++ b/hw/virtio-scsi.c @@ -13,9 +13,13 @@ * */ +#include "qemu-common.h" +#include "qemu-error.h" +#include "vhost-scsi.h" #include "virtio-scsi.h" #include <hw/scsi.h> #include <hw/scsi-defs.h> +#include "vhost.h" #define VIRTIO_SCSI_VQ_SIZE 128 #define VIRTIO_SCSI_CDB_SIZE 32 @@ -144,6 +148,10 @@ typedef struct { uint32_t cdb_size; int resetting; bool events_dropped; + + bool vhost_started; + VHostSCSI *vhost_scsi; + VirtQueue *ctrl_vq; VirtQueue *event_vq; VirtQueue *cmd_vqs[0]; @@ -699,6 +707,38 @@ static struct SCSIBusInfo virtio_scsi_scsi_info = { .load_request = virtio_scsi_load_request, }; +static bool virtio_scsi_started(VirtIOSCSI *s, uint8_t val) +{ + return (val & VIRTIO_CONFIG_S_DRIVER_OK) && s->vdev.vm_running; +} + +static void virtio_scsi_set_status(VirtIODevice *vdev, uint8_t val) +{ + VirtIOSCSI *s = (VirtIOSCSI *)vdev; + bool start = virtio_scsi_started(s, val); + + if (s->vhost_started == start) { + return; + } + + if (start) { + int ret; + + ret = vhost_scsi_start(s->vhost_scsi, vdev); + if (ret < 0) { + error_report("virtio-scsi: unable to start vhost: %s\n", + strerror(-ret)); + + /* There is no userspace virtio-scsi fallback so exit */ + exit(1); + } + } else { + vhost_scsi_stop(s->vhost_scsi, vdev); + } + + s->vhost_started = start; +} + VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf) { VirtIOSCSI *s; @@ -712,12 +752,17 @@ VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *proxyconf) s->qdev = dev; s->conf = proxyconf; + s->vhost_started = false; + s->vhost_scsi = s->conf->vhost_scsi; /* TODO set up vdev function pointers */ s->vdev.get_config = virtio_scsi_get_config; s->vdev.set_config = virtio_scsi_set_config; s->vdev.get_features = virtio_scsi_get_features; s->vdev.reset = virtio_scsi_reset; + if (s->vhost_scsi) { + s->vdev.set_status = virtio_scsi_set_status; + } s->ctrl_vq = virtio_add_queue(&s->vdev, VIRTIO_SCSI_VQ_SIZE, virtio_scsi_handle_ctrl); @@ -743,5 +788,9 @@ void virtio_scsi_exit(VirtIODevice *vdev) { VirtIOSCSI *s = (VirtIOSCSI *)vdev; unregister_savevm(s->qdev, "virtio-scsi", s); + + /* This will stop vhost backend if appropriate. */ + virtio_scsi_set_status(vdev, 0); + virtio_cleanup(vdev); } diff --git a/hw/virtio-scsi.h b/hw/virtio-scsi.h index 4bc889d..74e9422 100644 --- a/hw/virtio-scsi.h +++ b/hw/virtio-scsi.h @@ -22,6 +22,7 @@ #define VIRTIO_SCSI_F_CHANGE 2 struct VirtIOSCSIConf { + VHostSCSI *vhost_scsi; uint32_t num_queues; uint32_t max_sectors; uint32_t cmd_per_lun; -- 1.7.2.5
Nicholas A. Bellinger
2012-Sep-07 06:48 UTC
[PATCH 5/5] virtio-scsi: Set max_target=0 during vhost-scsi operation
From: Nicholas Bellinger <nab at linux-iscsi.org> This QEMU patch sets VirtIOSCSIConfig->max_target=0 for vhost-scsi operation to restrict virtio-scsi LLD guest scanning to max_id=0 (a single target ID instance) when connected to individual tcm_vhost endpoints. This ensures that virtio-scsi LLD only attempts to scan target IDs up to VIRTIO_SCSI_MAX_TARGET when connected via virtio-scsi-raw. Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> Cc: Paolo Bonzini <pbonzini at redhat.com> Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> --- hw/virtio-scsi.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c index edda097..ab5ca72 100644 --- a/hw/virtio-scsi.c +++ b/hw/virtio-scsi.c @@ -546,7 +546,11 @@ static void virtio_scsi_get_config(VirtIODevice *vdev, stl_raw(&scsiconf->sense_size, s->sense_size); stl_raw(&scsiconf->cdb_size, s->cdb_size); stl_raw(&scsiconf->max_channel, VIRTIO_SCSI_MAX_CHANNEL); - stl_raw(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET); + if (s->vhost_scsi) { + stl_raw(&scsiconf->max_target, 0); + } else { + stl_raw(&scsiconf->max_target, VIRTIO_SCSI_MAX_TARGET); + } stl_raw(&scsiconf->max_lun, VIRTIO_SCSI_MAX_LUN); } -- 1.7.2.5
Paolo Bonzini
2012-Sep-07 16:00 UTC
[PATCH 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi
Il 07/09/2012 08:48, Nicholas A. Bellinger ha scritto:> Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> > Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> > Cc: Michael S. Tsirkin <mst at redhat.com> > Cc: Paolo Bonzini <pbonzini at redhat.com> > Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> > --- > hw/virtio-pci.c | 2 ++ > hw/virtio-scsi.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > hw/virtio-scsi.h | 1 + > 3 files changed, 52 insertions(+), 0 deletions(-)Please create a completely separate device vhost-scsi-pci instead (or virtio-scsi-tcm-pci, or something like that). It is used completely differently from virtio-scsi-pci, it does not make sense to conflate the two. Paolo
Nicholas A. Bellinger
2012-Sep-07 19:23 UTC
[PATCH 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi
On Fri, 2012-09-07 at 18:00 +0200, Paolo Bonzini wrote:> Il 07/09/2012 08:48, Nicholas A. Bellinger ha scritto: > > Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> > > Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> > > Cc: Michael S. Tsirkin <mst at redhat.com> > > Cc: Paolo Bonzini <pbonzini at redhat.com> > > Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> > > --- > > hw/virtio-pci.c | 2 ++ > > hw/virtio-scsi.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > > hw/virtio-scsi.h | 1 + > > 3 files changed, 52 insertions(+), 0 deletions(-) > > Please create a completely separate device vhost-scsi-pci instead (or > virtio-scsi-tcm-pci, or something like that). It is used completely > differently from virtio-scsi-pci, it does not make sense to conflate the > two. >Ok, I need to figure out what this will involve over the next days, and will likely have some more questions for you to get a standlone vhost-scsi-pci up and running. Also just curious (question for Anthony + QEMU folks), how long can we expect the QEMU 1.3 merge window to be open..? Thanks Paolo! --nab
Paolo Bonzini
2012-Sep-07 20:30 UTC
[PATCH 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi
Il 07/09/2012 21:23, Nicholas A. Bellinger ha scritto:>> > Please create a completely separate device vhost-scsi-pci instead (or >> > virtio-scsi-tcm-pci, or something like that). It is used completely >> > differently from virtio-scsi-pci, it does not make sense to conflate the >> > two. >> > > Ok, I need to figure out what this will involve over the next days, and > will likely have some more questions for you to get a standlone > vhost-scsi-pci up and running. > > Also just curious (question for Anthony + QEMU folks), how long can we > expect the QEMU 1.3 merge window to be open..?wiki.qemu.org/Planning/1.3 - no hurry, until November 15th. Paolo
Michael S. Tsirkin
2012-Sep-08 22:40 UTC
[PATCH 4/5] virtio-scsi: Add start/stop functionality for vhost-scsi
On Fri, Sep 07, 2012 at 06:00:50PM +0200, Paolo Bonzini wrote:> Il 07/09/2012 08:48, Nicholas A. Bellinger ha scritto: > > Cc: Stefan Hajnoczi <stefanha at linux.vnet.ibm.com> > > Cc: Zhi Yong Wu <wuzhy at linux.vnet.ibm.com> > > Cc: Michael S. Tsirkin <mst at redhat.com> > > Cc: Paolo Bonzini <pbonzini at redhat.com> > > Signed-off-by: Nicholas Bellinger <nab at linux-iscsi.org> > > --- > > hw/virtio-pci.c | 2 ++ > > hw/virtio-scsi.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ > > hw/virtio-scsi.h | 1 + > > 3 files changed, 52 insertions(+), 0 deletions(-) > > Please create a completely separate device vhost-scsi-pci instead (or > virtio-scsi-tcm-pci, or something like that). It is used completely > differently from virtio-scsi-pci, it does not make sense to conflate the > two. > > PaoloIdeally the name would say how it is different, not what backend it uses. Any good suggestions? -- MST
Asias He
2012-Sep-11 04:36 UTC
[PATCH 0/5] vhost-scsi: Add support for host virtualized target
Hello Nicholas, On 09/07/2012 02:48 PM, Nicholas A. Bellinger wrote:> From: Nicholas Bellinger <nab at linux-iscsi.org> > > Hello Anthony & Co, > > This is the fourth installment to add host virtualized target support for > the mainline tcm_vhost fabric driver using Linux v3.6-rc into QEMU 1.3.0-rc. > > The series is available directly from the following git branch: > > git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git vhost-scsi-for-1.3 > > Note the code is cut against yesterday's QEMU head, and dispite the name > of the tree is based upon mainline qemu.org git code + has thus far been > running overnight with > 100K IOPs small block 4k workloads using v3.6-rc2+ > based target code with RAMDISK_DR backstores.Are you still seeing the performance degradation discussed in the thread "vhost-scsi port to v1.1.0 + MSI-X performance regression" ?> Other than some minor fuzz between jumping from QEMU 1.2.0 -> 1.2.50, this > series is functionally identical to what's been posted for vhost-scsi RFC-v3 > to qemu-devel. > > Please consider applying these patches for an initial vhost-scsi merge into > QEMU 1.3.0-rc code, or let us know what else you'd like to see addressed for > this series to in order to merge. > > Thank you! > > --nab > > Nicholas Bellinger (2): > monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param > virtio-scsi: Set max_target=0 during vhost-scsi operation > > Stefan Hajnoczi (3): > vhost: Pass device path to vhost_dev_init() > vhost-scsi: add -vhost-scsi host device for use with tcm-vhost > virtio-scsi: Add start/stop functionality for vhost-scsi > > configure | 10 +++ > hw/Makefile.objs | 1 + > hw/qdev-properties.c | 41 +++++++++++ > hw/vhost-scsi.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/vhost-scsi.h | 62 ++++++++++++++++ > hw/vhost.c | 5 +- > hw/vhost.h | 3 +- > hw/vhost_net.c | 2 +- > hw/virtio-pci.c | 2 + > hw/virtio-scsi.c | 55 ++++++++++++++- > hw/virtio-scsi.h | 1 + > monitor.c | 18 +++++ > monitor.h | 1 + > net.c | 18 ----- > net.h | 2 - > net/socket.c | 2 +- > net/tap.c | 4 +- > qemu-common.h | 1 + > qemu-config.c | 19 +++++ > qemu-options.hx | 4 + > vl.c | 18 +++++ > 21 files changed, 431 insertions(+), 28 deletions(-) > create mode 100644 hw/vhost-scsi.c > create mode 100644 hw/vhost-scsi.h >-- Asias
Michael S. Tsirkin
2013-Jan-17 16:43 UTC
[PATCH 0/5] vhost-scsi: Add support for host virtualized target
On Fri, Sep 07, 2012 at 06:48:14AM +0000, Nicholas A. Bellinger wrote:> From: Nicholas Bellinger <nab at linux-iscsi.org> > > Hello Anthony & Co, > > This is the fourth installment to add host virtualized target support for > the mainline tcm_vhost fabric driver using Linux v3.6-rc into QEMU 1.3.0-rc. > > The series is available directly from the following git branch: > > git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git vhost-scsi-for-1.3 > > Note the code is cut against yesterday's QEMU head, and dispite the name > of the tree is based upon mainline qemu.org git code + has thus far been > running overnight with > 100K IOPs small block 4k workloads using v3.6-rc2+ > based target code with RAMDISK_DR backstores. > > Other than some minor fuzz between jumping from QEMU 1.2.0 -> 1.2.50, this > series is functionally identical to what's been posted for vhost-scsi RFC-v3 > to qemu-devel. > > Please consider applying these patches for an initial vhost-scsi merge into > QEMU 1.3.0-rc code, or let us know what else you'd like to see addressed for > this series to in order to merge. > > Thank you! > > --nabOK what's the status here? We missed 1.3 but let's try not to miss 1.4?> Nicholas Bellinger (2): > monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param > virtio-scsi: Set max_target=0 during vhost-scsi operation > > Stefan Hajnoczi (3): > vhost: Pass device path to vhost_dev_init() > vhost-scsi: add -vhost-scsi host device for use with tcm-vhost > virtio-scsi: Add start/stop functionality for vhost-scsi > > configure | 10 +++ > hw/Makefile.objs | 1 + > hw/qdev-properties.c | 41 +++++++++++ > hw/vhost-scsi.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/vhost-scsi.h | 62 ++++++++++++++++ > hw/vhost.c | 5 +- > hw/vhost.h | 3 +- > hw/vhost_net.c | 2 +- > hw/virtio-pci.c | 2 + > hw/virtio-scsi.c | 55 ++++++++++++++- > hw/virtio-scsi.h | 1 + > monitor.c | 18 +++++ > monitor.h | 1 + > net.c | 18 ----- > net.h | 2 - > net/socket.c | 2 +- > net/tap.c | 4 +- > qemu-common.h | 1 + > qemu-config.c | 19 +++++ > qemu-options.hx | 4 + > vl.c | 18 +++++ > 21 files changed, 431 insertions(+), 28 deletions(-) > create mode 100644 hw/vhost-scsi.c > create mode 100644 hw/vhost-scsi.h > > -- > 1.7.2.5 > > _______________________________________________ > Virtualization mailing list > Virtualization at lists.linux-foundation.org > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
Wenchao Xia
2013-Apr-02 03:28 UTC
[Qemu-devel] [PATCH 0/5] vhost-scsi: Add support for host virtualized target
Hi, Nicholas Have this serial been merged to qemu 1.4? If not, I am rebasing it to upstream, hope no one else is working on that.> From: Nicholas Bellinger <nab at linux-iscsi.org> > > Hello Anthony & Co, > > This is the fourth installment to add host virtualized target support for > the mainline tcm_vhost fabric driver using Linux v3.6-rc into QEMU 1.3.0-rc. > > The series is available directly from the following git branch: > > git://git.kernel.org/pub/scm/virt/kvm/nab/qemu-kvm.git vhost-scsi-for-1.3 > > Note the code is cut against yesterday's QEMU head, and dispite the name > of the tree is based upon mainline qemu.org git code + has thus far been > running overnight with > 100K IOPs small block 4k workloads using v3.6-rc2+ > based target code with RAMDISK_DR backstores. > > Other than some minor fuzz between jumping from QEMU 1.2.0 -> 1.2.50, this > series is functionally identical to what's been posted for vhost-scsi RFC-v3 > to qemu-devel. > > Please consider applying these patches for an initial vhost-scsi merge into > QEMU 1.3.0-rc code, or let us know what else you'd like to see addressed for > this series to in order to merge. > > Thank you! > > --nab > > Nicholas Bellinger (2): > monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param > virtio-scsi: Set max_target=0 during vhost-scsi operation > > Stefan Hajnoczi (3): > vhost: Pass device path to vhost_dev_init() > vhost-scsi: add -vhost-scsi host device for use with tcm-vhost > virtio-scsi: Add start/stop functionality for vhost-scsi > > configure | 10 +++ > hw/Makefile.objs | 1 + > hw/qdev-properties.c | 41 +++++++++++ > hw/vhost-scsi.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++++ > hw/vhost-scsi.h | 62 ++++++++++++++++ > hw/vhost.c | 5 +- > hw/vhost.h | 3 +- > hw/vhost_net.c | 2 +- > hw/virtio-pci.c | 2 + > hw/virtio-scsi.c | 55 ++++++++++++++- > hw/virtio-scsi.h | 1 + > monitor.c | 18 +++++ > monitor.h | 1 + > net.c | 18 ----- > net.h | 2 - > net/socket.c | 2 +- > net/tap.c | 4 +- > qemu-common.h | 1 + > qemu-config.c | 19 +++++ > qemu-options.hx | 4 + > vl.c | 18 +++++ > 21 files changed, 431 insertions(+), 28 deletions(-) > create mode 100644 hw/vhost-scsi.c > create mode 100644 hw/vhost-scsi.h >-- Best Regards Wenchao Xia
Possibly Parallel Threads
- [RFC-v3 0/5] vhost-scsi: Add support for host virtualized target
- [RFC-v3 0/5] vhost-scsi: Add support for host virtualized target
- [PATCH 0/5] vhost-scsi: Add support for host virtualized target
- [RFC-v2 0/6] vhost-scsi: Add support for host virtualized target
- [RFC-v2 0/6] vhost-scsi: Add support for host virtualized target