Just curious if anyone out there has tried to run a bridge on a dreamplug. I have three that I'm sticking next to each other, and thought it would be less mess to "chain" the eth's together, and only use up cable and switch port (each plug has two gige ports). The traffic to the dreamplugs is going to be tiny, but I was concerned about processor utilization for dealing with the broadcasts from the rest of the network. (the network is 1gbps switched) It's my understanding that these dreamplugs ship with Debian Wheezy or Debian Lenny installed. I'll have a few in my hands in the next two hours and then I'll know for sure. Any thoughts from the experts? Jeremy