On Wed, 1 Feb 2006 10:31:07 +0100
Louis Croisez <louis.croisez@gmail.com> wrote:
> Hello,
> i need to write a little personal patch in the bridge code.
> For this patch, i need to know the original src and dst mac addresses
> of the packet incoming to the bridge. As i work on a brouter (some
> packets are bridged, some are routed based on ebtable rules), packets
> that are routed have their mac addresses modified by the IP stack).
At start of br_handle_frame, dst mac address in skb is as received on
wire. Call sequence is:
netif_receive_skb
handle_bridge
br_handle_frame
The skb on the pre-routing chain is actually after brouting but before
going through bridge forwarding.
> I put a software probe in br_input.c::br_handle_frame( ), but there,
> the dst mac address is already replaced by the bridge local mac
> address.
> My question is: where must i put the probe to get the original src and
> dst mac addresses? At the driver level? In the bridge, but where?
>
> Thx in advance.
> PS: please CC to louis.croisezATgmail.com, because i am receiving the
> digest once per day.
>
> _______________________________________________
> Bridge mailing list
> Bridge@lists.osdl.org
> https://lists.osdl.org/mailman/listinfo/bridge
--
Stephen Hemminger <shemminger@osdl.org>
OSDL http://developer.osdl.org/~shemminger