hello everyone good day, im just new here, good day
just wanna ask ... i want to priotize voip ports first
before anything else, with the PRIO below which is 0
is it necessary or ill just put the filter of rtsp
protocol to prio 3 instead of 0 .... thanks, does the
priority differs from class / ip address / filter etc
?
ex: class prio 0 1 2 3 4
thanks,
- stephanie
here is my partial sample config
tc class add dev eth0 parent 1:1 classid 1:10 htb rate
100kbps ceil 200kbps burst 2k prio 1
tc class add dev eth0 parent 1:1 classid 1:20 htb rate
50kbps ceil 100kbps burst 2k prio 2
tc filter add dev eth0 parent 1:0 protocol ip prio 0
u32 match ip protocol 6 0xff match ip dport 554 0xff
flowid 1:10
tc filter add dev eth0 parent 1:0 protocol ip prio 0
u32 match ip protocol 6 0xff match ip sport 554 0xff
flowid 1:10
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
