Hi all,
For simple CBQ configuration, it''s showing the stats as below.
### eth0: queueing disciplines
qdisc cbq # 1:
rate = 10Mbit
(bounded, isolated)
prio no-transmit
### eth0: traffic classes
class cbq # 1: root
rate = 10Mbit
(bounded, isolated)
prio no-transmit
If the Interface ROOT qdisc/class is ISOLATED, then how it will lend
it''s unused Bandwidth to it''s children,
C''d anybody help me please.
regards,
Srikanth.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
On Thursday 15 May 2003 07:17, Srikanth wrote:> Hi all, > > For simple CBQ configuration, it''s showing the stats as below. > > ### eth0: queueing disciplines > > qdisc cbq # 1: > > rate = 10Mbit > (bounded, isolated) > prio no-transmit > > > ### eth0: traffic classes > > class cbq # 1: root > > rate = 10Mbit > (bounded, isolated) > prio no-transmit > > If the Interface ROOT qdisc/class is ISOLATED, then how it will lend > it''s unused Bandwidth to it''s children, > > C''d anybody help me please.Forget isolated. It''s not working. It can even disturb the cbq setup. I did some test for it (I don''t know the exact page but you can find it on www.doucm.org). Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/