Hi! I have sucessfully installed the iproute2 stuff. I configurated the way l= ike=20 this: iptables -A PREROUTING -i eth0 -t mangle -p TCP --dport 80 -j MARK --set-= mark echo 201 dynamic.out >> /etc/iproute2/rt_tables ip rule add fwmark 1 table dynamic.out ip route add default via <my_dyn_ip> dev ppp0 table dynamic.out iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE After setup it's working fine. But instead of only routing only the http=20 requests over ppp0, all protocols are routed over this interface. I have another DSL line (SDSL) with a public IP address. I don't know, wh= y=20 everything is routed through the ADSL line. Best regards Stefan --=20 __________________________________________ stefan weigel administration global linxs gmbh knowledge interaction romanstrasse 16 80639 munich - germany www.global-linxs.com tel.: +49(0)89. 189 336- 61 fax.: +49(0)89. 189 336- 99 email: sw@global-linxs.com __________________________________________
Hi Stefan, The problem is that you must have a copy of your routing table installed = with=20 a different default. Look at the small shell script in=20 http://linux-ip.net/html/adv-multi-internet.html. /Kim On Monday 31 March 2003 18:54, Stefan Weigel wrote: > Hi! > I have sucessfully installed the iproute2 stuff. I configurated the way > like this: > > iptables -A PREROUTING -i eth0 -t mangle -p TCP --dport 80 -j MARK > --set-mark > > echo 201 dynamic.out >> /etc/iproute2/rt_tables > ip rule add fwmark 1 table dynamic.out > ip route add default via <my_dyn_ip> dev ppp0 table dynamic.out > > iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE > > > After setup it's working fine. But instead of only routing only the htt= p > requests over ppp0, all protocols are routed over this interface. > > I have another DSL line (SDSL) with a public IP address. I don't know, = why > everything is routed through the ADSL line. > > > Best regards > > Stefan