freebsd stable - Feb 2017 - FreeBSD 11.0, bxe and lagg

I'm in the process of upgrading my 10.3 servers to 11.0. I have stumbled
upon
problems with lagg on two boxes.

They both have QLogic NetXtreme II BCM57800 10GbE network card using the bxe 
driver.

My lagg configuration is unchanged in the process but after upgradring to 11.0 
lagg is no longer working.

/etc/rc.conf:
ifconfig_bxe2="up"
ifconfig_bxe3="up"
cloned_interfaces="lagg0"
ifconfig_lagg0="laggproto lacp laggport bxe2 laggport bxe3 129.242.3.9
netmask
255.255.255.192"


ifconfig lagg0
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
        ether .....
        inet 129.242.3.9 netmask 0xffffffc0 broadcast 129.242.3.63
        nd options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: active
        groups: lagg
        laggproto lacp lagghash l2,l3,l4
        laggport: bge2 flags=0<>
        laggport: bge3 flags=0<>


As you can see the laggport flags are empty where I would expect 
flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
No error messages. The interfaces work ok if I drop using lagg.

The same configuration has survived the upgrade on boxes using bge


Any ideas?


--Ingeborg
-- 
Ingeborg ?strem Hellemo  --  ingeborg.hellemo at uit.no
Dep. of Information Technology  ---  Univ. of Troms?

On Tue, 21 Feb 2017 10:39+0100, Ingeborg Hellemo wrote:
> 
> I'm in the process of upgrading my 10.3 servers to 11.0. I have
stumbled upon
> problems with lagg on two boxes.
> 
> They both have QLogic NetXtreme II BCM57800 10GbE network card using the
bxe
> driver.
> 
> My lagg configuration is unchanged in the process but after upgradring to
11.0
> lagg is no longer working.
> 
> /etc/rc.conf:
> ifconfig_bxe2="up"
> ifconfig_bxe3="up"
> cloned_interfaces="lagg0"
> ifconfig_lagg0="laggproto lacp laggport bxe2 laggport bxe3 129.242.3.9
netmask
> 255.255.255.192"
> 
> 
> ifconfig lagg0
> lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0
mtu 1500
>         ether .....
>         inet 129.242.3.9 netmask 0xffffffc0 broadcast 129.242.3.63
>         nd options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>         media: Ethernet autoselect
>         status: active
>         groups: lagg
>         laggproto lacp lagghash l2,l3,l4
>         laggport: bge2 flags=0<>
>         laggport: bge3 flags=0<>
> 
> 
> As you can see the laggport flags are empty where I would expect 
> flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
> No error messages. The interfaces work ok if I drop using lagg.
> 
> The same configuration has survived the upgrade on boxes using bge
> 
> 
> Any ideas?
Why does lagg0 refer to bge2 and bge3 in the ifconfig output, and not 
to bxe2 and bxe3?

-- 
+-------------------------------+------------------------------------+
| Vennlig hilsen,               | Best regards,                      |
| Trond Endrest?l,              | Trond Endrest?l,                   |
| IT-ansvarlig,                 | System administrator,              |
| Fagskolen Innlandet,          | Gj?vik Technical College, Norway,  |
| tlf. mob.   952 62 567,       | Cellular...: +47 952 62 567,       |
| sentralbord 61 14 54 00.      | Switchboard: +47 61 14 54 00.      |
+-------------------------------+------------------------------------+