On 2014-01-06 13:12, Sean Bruno wrote:> heh, "new" eh? anyway, a bit of comments about some of the log
> messages
> inline.
>
new to me, ok? -- hey -- it was < $300> On Fri, 2014-01-03 at 22:40 -0600, Larry Rosenman wrote:
>> I just bought a new HP DL360 G5, and have FreeBSD 10.0-RC4 (from the
>> stable branch) running just fine.
>>
>> However, some of the messages at boot are "interesting", and
I wonder
>> if I should worry or file any PR's or give access...
>>
>> dmesg:
>>
>> Copyright (c) 1992-2014 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
>> 1994
>> The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 10.0-PRERELEASE #0 r260249: Fri Jan 3 19:21:13 CST 2014
>> root at thebighonker2:/usr/obj/usr/src/sys/GENERIC amd64
>> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
>> CPU: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz (2500.14-MHz
>> K8-class CPU)
>> Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model
= 0x17
>> Stepping = 6
>>
>>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>
>>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
>> AMD Features=0x20100800<SYSCALL,NX,LM>
>> AMD Features2=0x1<LAHF>
>> TSC: P-state invariant, performance statistics
>> real memory = 17179869184 (16384 MB)
>> avail memory = 16588226560 (15819 MB)
>> Event timer "LAPIC" quality 400
>> ACPI APIC Table: <HP ProLiant>
>> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>> FreeBSD/SMP: 2 package(s) x 4 core(s)
>> cpu0 (BSP): APIC ID: 0
>> cpu1 (AP): APIC ID: 1
>> cpu2 (AP): APIC ID: 2
>> cpu3 (AP): APIC ID: 3
>> cpu4 (AP): APIC ID: 4
>> cpu5 (AP): APIC ID: 5
>> cpu6 (AP): APIC ID: 6
>> cpu7 (AP): APIC ID: 7
> ---
>> ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32,
>> using default 16 (20130823/tbfadt-682)
>> ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32,
>> using default 8 (20130823/tbfadt-682)
> --
> I don't see this on my boxes, so I assume a bios f/w update is in
> order.
> There's some DOS things hopefully for this or you can do linux live and
> install their crap.
This is from the latest BIOS on the SPP DVD. It's also the last one
from what I can tell for this generation (P58), it's from 11/2008.
>
>> ioapic0 <Version 2.0> irqs 0-23 on motherboard
>> ioapic1 <Version 2.0> irqs 24-47 on motherboard
>> random: <Software, Yarrow> initialized
>> kbd1 at kbdmux0
>> cryptosoft0: <software crypto> on motherboard
>> acpi0: <HP ProLiant> on motherboard
>> acpi0: Power Button (fixed)
>> cpu0: <ACPI CPU> on acpi0
>> cpu1: <ACPI CPU> on acpi0
>> cpu2: <ACPI CPU> on acpi0
>> cpu3: <ACPI CPU> on acpi0
>> cpu4: <ACPI CPU> on acpi0
>> cpu5: <ACPI CPU> on acpi0
>> cpu6: <ACPI CPU> on acpi0
>> cpu7: <ACPI CPU> on acpi0
>> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> Event timer "i8254" frequency 1193182 Hz quality 100
>> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff
on
>> acpi0
>> Timecounter "HPET" frequency 14318180 Hz quality 950
>> Event timer "HPET" frequency 14318180 Hz quality 350
>> Event timer "HPET1" frequency 14318180 Hz quality 340
>> Event timer "HPET2" frequency 14318180 Hz quality 340
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on
acpi0
>> pcib0: <ACPI Host-PCI bridge> on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>> ACPI Warning: \134_SB_.PCI0.PT02._PRT: Return Package has no elements
>> (empty) (20130823/nsprepkg-137)
>> pci9: <ACPI PCI bus> on pcib1
>> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
>> pci10: <ACPI PCI bus> on pcib2
>> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
>> pci11: <ACPI PCI bus> on pcib3
>> pcib4: <PCI-PCI bridge> at device 1.0 on pci10
>> pci14: <PCI bus> on pcib4
>> pcib5: <PCI-PCI bridge> at device 2.0 on pci10
>> pci15: <PCI bus> on pcib5
>> pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci9
>> pci16: <ACPI PCI bus> on pcib6
>> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
>> pci6: <ACPI PCI bus> on pcib7
>> ciss0: <HP Smart Array P400i> port 0x4000-0x40ff mem
>> 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 16 at device 0.0 on
>> pci6
>> ciss0: PERFORMANT Transport
>> pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>> pci19: <ACPI PCI bus> on pcib8
>> pcib9: <PCI-PCI bridge> at device 5.0 on pci0
>> pci22: <PCI bus> on pcib9
>> pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>> pci2: <ACPI PCI bus> on pcib10
>> pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci2
>> pci3: <ACPI PCI bus> on pcib11
>> bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem
>> 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
>> bce0: /usr/src/sys/dev/bce/if_bce.c(1251): Management firmware enabled
>> but not running!
>> miibus0: <MII bus> on bce0
>> brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>> bce0: Ethernet address: 00:23:7d:9e:6e:8a
>> bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
>> (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT
>> RUNNING!)
>> Coal (RX:6,6,18,18; TX:20,20,80,80)
>> pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0
>> pci4: <ACPI PCI bus> on pcib12
>> pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci4
>> pci5: <ACPI PCI bus> on pcib13
>> bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem
>> 0xfa000000-0xfbffffff irq 19 at device 0.0 on pci5
> ----
>> bce1: /usr/src/sys/dev/bce/if_bce.c(1251): Management firmware enabled
>> but not running!
> ----
> I assume you don't have IPMI enabled or its not an option here.
Not an option from the HP Servers, as they have ILO2....
>
>> miibus1: <MII bus> on bce1
>> brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus1
>> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>> bce1: Ethernet address: 00:23:7d:9e:ed:86
>> bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C
>> (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT
>> RUNNING!)
>> Coal (RX:6,6,18,18; TX:20,20,80,80)
>> uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
>> 0x1000-0x101f irq 16 at device 29.0 on pci0
>> usbus0 on uhci0
>> uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
>> 0x1020-0x103f irq 17 at device 29.1 on pci0
>> usbus1 on uhci1
>> uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
>> 0x1040-0x105f irq 18 at device 29.2 on pci0
>> usbus2 on uhci2
>> uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port
>> 0x1060-0x107f irq 19 at device 29.3 on pci0
>> usbus3 on uhci3
>> ehci0: <Intel 63XXESB USB 2.0 controller> mem
0xf7df0000-0xf7df03ff
>> irq 16 at device 29.7 on pci0
>> usbus4: EHCI version 1.0
>> usbus4 on ehci0
>> pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>> pci1: <ACPI PCI bus> on pcib14
>> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
>> 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on
>> pci1
>> vgapci0: Boot video device
>> pci1: <base peripheral> at device 4.0 (no driver attached)
>> pci1: <base peripheral> at device 4.2 (no driver attached)
>> uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22
at
>> device 4.4 on pci1
>> usbus5 on uhci4
>> ipmi0: <IPMI System Interface> mem 0xf7ef0000-0xf7ef00ff irq 21
at
>> device 4.6 on pci1
>> ipmi0: using KSC interface
>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <Intel 63XXESB2 UDMA100 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1
>> on pci0
>> ata0: <ATA channel> at channel 0 on atapci0
>> acpi_tz0: <Thermal Zone> on acpi0
>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on
acpi0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on
>> acpi0
>> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff
on
>> isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
on
>> isa0
>> atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
>> Event timer "RTC" frequency 32768 Hz quality 0
>> ppc0: cannot reserve I/O port range
>> uart1: <Non-standard ns8250 class UART with FIFOs> at port
0x2f8-0x2ff
>> irq 3 on isa0
> ----
>> est0: <Enhanced SpeedStep Frequency Control> on cpu0
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est0 attach returned 6
> ----
> This usually means you don't have the BIOS power managment features set
> to "O/S Control" or whatever. So the kernel cannot do est(4)
things.
> There's a bit of this kind of information in the est(4) man page.
Even if I set O/S control, I still get this message. the manpage
has a different MSR value :(
>
>> p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> est1: <Enhanced SpeedStep Frequency Control> on cpu1
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est1 attach returned 6
>> p4tcc1: <CPU Frequency Thermal Control> on cpu1
>> est2: <Enhanced SpeedStep Frequency Control> on cpu2
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est2 attach returned 6
>> p4tcc2: <CPU Frequency Thermal Control> on cpu2
>> est3: <Enhanced SpeedStep Frequency Control> on cpu3
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est3 attach returned 6
>> p4tcc3: <CPU Frequency Thermal Control> on cpu3
>> est4: <Enhanced SpeedStep Frequency Control> on cpu4
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est4 attach returned 6
>> p4tcc4: <CPU Frequency Thermal Control> on cpu4
>> est5: <Enhanced SpeedStep Frequency Control> on cpu5
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est5 attach returned 6
>> p4tcc5: <CPU Frequency Thermal Control> on cpu5
>> est6: <Enhanced SpeedStep Frequency Control> on cpu6
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est6 attach returned 6
>> p4tcc6: <CPU Frequency Thermal Control> on cpu6
>> est7: <Enhanced SpeedStep Frequency Control> on cpu7
>> est: CPU supports Enhanced Speedstep, but is not recognized.
>> est: cpu_vendor GenuineIntel, msr 4718471806004718
>> device_attach: est7 attach returned 6
>> p4tcc7: <CPU Frequency Thermal Control> on cpu7
>> ZFS filesystem version: 5
>> ZFS storage pool version: features support (5000)
>> Timecounters tick every 1.000 msec
>> random: unblocking device.
>> usbus0: 12Mbps Full Speed USB v1.0
>> usbus1: 12Mbps Full Speed USB v1.0
>> usbus2: 12Mbps Full Speed USB v1.0
>> usbus3: 12Mbps Full Speed USB v1.0
>> usbus4: 480Mbps High Speed USB v2.0
>> usbus5: 12Mbps Full Speed USB v1.0
>> ugen1.1: <Intel> at usbus1
>> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus1
>> ugen0.1: <Intel> at usbus0
>> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus0
>> ugen4.1: <Intel> at usbus4
>> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>> usbus4
>> ugen3.1: <Intel> at usbus3
>> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus3
>> ugen2.1: <Intel> at usbus2
>> uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>> usbus2
>> ugen5.1: <0x103c> at usbus5
>> uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1>
on
>> usbus5
>> ipmi0: IPMI device rev. 1, firmware rev. 2.20, version 2.0
>> ipmi0: Number of channels 0
>> ipmi0: Attached watchdog
>> da0 at ciss0 bus 0 scbus0 target 0 lun 0
>> da0: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da0: Serial Number PH8BMQ3157
>> da0: 135.168MB/s transfers
>> da0: Command Queueing enabled
>> da0: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> da1 at ciss0 bus 0 scbus0 target 1 lun 0
>> da1: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da1: Serial Number PH8BMQ3157
>> da1: 135.168MB/s transfers
>> da1: Command Queueing enabled
>> da1: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> da2 at ciss0 bus 0 scbus0 target 2 lun 0
>> da2: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da2: Serial Number PH8BMQ3157
>> da2: 135.168MB/s transfers
>> da2: Command Queueing enabled
>> da2: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> da3 at ciss0 bus 0 scbus0 target 3 lun 0
>> da3: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da3: Serial Number PH8BMQ3157
>> da3: 135.168MB/s transfers
>> da3: Command Queueing enabled
>> da3: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> da4 at ciss0 bus 0 scbus0 target 4 lun 0
>> da4: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da4: Serial Number PH8BMQ3157
>> da4: 135.168MB/s transfers
>> da4: Command Queueing enabled
>> da4: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> da5 at ciss0 bus 0 scbus0 target 5 lun 0
>> da5: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
>> da5: Serial Number PH8BMQ3157
>> da5: 135.168MB/s transfers
>> da5: Command Queueing enabled
>> da5: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
>> cd0 at ata0 bus 0 scbus2 target 0 lun 0
>> cd0: <TEAC DV-28E-V C.AB> Removable CD-ROM SCSI-0 device
>> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>> cd0: Attempt to query device size failed: NOT READY, Medium not
>> present - tray closed
>> Netvsc initializing... SMP: AP CPU #6 Launched!
>> SMP: AP CPU #7 Launched!
>> SMP: AP CPU #5 Launched!
>> SMP: AP CPU #4 Launched!
>> SMP: AP CPU #1 Launched!
>> SMP: AP CPU #2 Launched!
>> SMP: AP CPU #3 Launched!
>> hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
TSC/1/64/0x20<REA>
>> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC>
>> IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
>> uhub3: 2 ports with 2 removable, self powered
>> uhub0: 2 ports with 2 removable, self powered
>> uhub1: 2 ports with 2 removable, self powered
>> uhub5: 2 ports with 2 removable, self powered
>> uhub4: 2 ports with 2 removable, self powered
>> Root mount waiting for: usbus5 usbus4
>> ugen5.2: <HP> at usbus5
>> ukbd0: <Virtual Keyboard> on usbus5
>> kbd2 at ukbd0
>> Root mount waiting for: usbus4
>> uhub2: 8 ports with 8 removable, self powered
>> Trying to mount root from zfs:zroot/ROOT/default []...
>> bce0: Gigabit link up!
>> ums0: <Virtual Mouse> on usbus5
>> ums0: 3 buttons and [XY] coordinates ID=0
>
> Other than that, I don't see too much wrong here.
>
> sean
Thanks, Sean!
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 (c) E-Mail: ler at lerctr.org
US Mail: 108 Turvey Cove, Hutto, TX 78634-5688