----- Original Message -----
From: "Daniel O'Connor" <doconnor at
gsoft.com.au>> Hi all,
> I'm trying to setup a ZFS mirror system with a USB disk as backup. The
backup disk is a ZFS pool which I am zfs send'ing to.
>
> However I find that if the disk is disconnected while mounted then things
go pear shaped..
> root at gateway:~ # zpool status -v
> pool: backupA
> state: UNAVAIL
> status: One or more devices are faulted in response to IO failures.
> action: Make sure the affected devices are connected, then run 'zpool
clear'.
> see: http://illumos.org/msg/ZFS-8000-HC
> scan: none requested
> config:
>
> NAME STATE READ WRITE CKSUM
> backupA UNAVAIL 0 0 0
> 1877640355 REMOVED 0 0 0 was /dev/da0
>
> errors: List of errors unavailable (insufficient privileges)
>
> (but I am root..)
>
> root at gateway:~ # zpool online pool /dev/da0
> cannot online /dev/da0: no such device in pool
>
> ?!
>
> Anyone have any ideas?
First "pool" is not your pool name its backupA so try:
zpool online backupA /dev/da0
If that still fails try:
zpool online backupA 1877640355
Regards
Steve
===============================================This e.mail is private and
confidential between Multiplay (UK) Ltd. and the person or entity to whom it is
addressed. In the event of misdirection, the recipient is prohibited from using,
copying, printing or otherwise disseminating it or any information contained in
it.
In the event of misdirection, illegible or incomplete transmission please
telephone +44 845 868 1337
or return the E.mail to postmaster at multiplay.co.uk.