here the full dmesg.
sorry
2012/3/18 Luca Postregna <luca.postregna@gmail.com>
> I haven't success with freebsd 9 on my old mini-itx.
> In attachs you can find output of:
>
> * dd bs=64k count=100 </dev/ada0 >/dev/null
> * dmesg
> * pciconf -lv
>
> no iusse on this disk with linux distros like debian, sysrescue, ecc.
> we think that this is driver iusse
>
> thanks,
> LP
>
> --
>
> http://luca.postregna.name
> Luca Postregna
>
>
--
http://luca.postregna.name
Luca Postregna
-------------- next part --------------
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Table 'FACP' at 0xf7f3040
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xc12a0000.
Calibrating TSC clock ... TSC clock: 997478793 Hz
CPU: Intel Pentium III (997.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Family = 6 Model = 8 Stepping
= 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
Instruction TLB: 4 KB pages, 4-way set associative, 32 entries
Instruction TLB: 4 MB pages, fully associative, 2 entries
Data TLB: 4 KB pages, 4-way set associative, 64 entries
2nd-level cache: 256 KB, 8-way set associative, 32 byte line size
1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size
Data TLB: 4 MB Pages, 4-way set associative, 8 entries
1st-level data cache: 16 KB, 4-way set associative, 32 byte line size
real memory = 536870912 (512 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x000000000f340fff, 233943040 bytes (57115 pages)
avail memory = 235167744 (224 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf50
bios32: Entry = 0xfb3c0 (c00fb3c0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb410
pnpbios: Found PnP BIOS data at 0xc00fbeb0
pnpbios: Entry = f0000:bee0 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1
feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
ACPI: RSDP 0xf71c0 00014 (v00 VIA605)
ACPI: RSDT 0xf7f3000 00028 (v01 VIA605 AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0xf7f3040 00074 (v01 VIA605 AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0xf7f30c0 023A8 (v01 VIA605 AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 0xf7f0000 00040
acpi0: <VIA605 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc2180000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06051106)
pcibios: BIOS version 2.10
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f6f0000 (3) failed
acpi_timer0: couldn't allocate resource (port 0x4008)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 1 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 11 12 14 15
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0x3fff
pcib0: Length mismatch for 4 range: f00 vs eff
pcib0: decoding 4 range 0x4100-0x4fff
pcib0: Length mismatch for 4 range: ff0 vs fef
pcib0: decoding 4 range 0x5010-0x5fff
pcib0: Length mismatch for 4 range: 9f80 vs 9f7f
pcib0: decoding 4 range 0x6080-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000-0xdffff
pcib0: decoding 3 range 0xf800000-0xffefffff
ACPI: Found matching pin for 0.15.INTA at func 0: 5
ACPI: Found matching pin for 0.12.INTA at func 0: 11
ACPI: Found matching pin for 0.7.INTC at func 5: 5
ACPI: Found matching pin for 0.7.INTD at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1106, dev=0x0605, revid=0x01
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, enabled
pcib0: allocated type 3 (0xe8000000-0xebffffff) for rid 10 of pci0:0:0:0
found-> vendor=0x1106, dev=0x8605, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D3 current D0
found-> vendor=0x1106, dev=0x0686, revid=0x40
domain=0, bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
domain=0, bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:7:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:7:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:7:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:7:1
map[20]: type I/O Port, range 32, base 0xd000, size 4, enabled
pcib0: allocated type 4 (0xd000-0xd00f) for rid 20 of pci0:0:7:1
found-> vendor=0x1106, dev=0x3038, revid=0x1a
domain=0, bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled
pcib0: allocated type 4 (0xd400-0xd41f) for rid 20 of pci0:0:7:2
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 7 INTD routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3038, revid=0x1a
domain=0, bus=0, slot=7, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled
pcib0: allocated type 4 (0xd800-0xd81f) for rid 20 of pci0:0:7:3
pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 7 INTD routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3057, revid=0x40
domain=0, bus=0, slot=7, func=4
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3058, revid=0x50
domain=0, bus=0, slot=7, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xdc00, size 8, enabled
pcib0: allocated type 4 (0xdc00-0xdcff) for rid 10 of pci0:0:7:5
map[14]: type I/O Port, range 32, base 0xe000, size 2, enabled
pcib0: allocated type 4 (0xe000-0xe003) for rid 14 of pci0:0:7:5
map[18]: type I/O Port, range 32, base 0xe400, size 2, enabled
pcib0: allocated type 4 (0xe400-0xe403) for rid 18 of pci0:0:7:5
pcib0: matched entry for 0.7.INTC (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 7 INTC routed to irq 5 via \\_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
domain=0, bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib0: allocated type 4 (0xe800-0xe8ff) for rid 10 of pci0:0:12:0
map[14]: type Memory, range 32, base 0xee000000, size 8, enabled
pcib0: allocated type 3 (0xee000000-0xee0000ff) for rid 14 of pci0:0:12:0
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKD:0)
pcib0: slot 12 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x11c1, dev=0x5811, revid=0x04
domain=0, bus=0, slot=15, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xee001000, size 12, enabled
pcib0: allocated type 3 (0xee001000-0xee001fff) for rid 10 of pci0:0:15:0
pcib0: matched entry for 0.15.INTA (src \\_SB_.PCI0.LNKC:0)
pcib0: slot 15 INTA routed to irq 5 via \\_SB_.PCI0.LNKC
agp0: <VIA 82C694X (Apollo Pro 133A) host to PCI bridge> on hostb0
agp0: allocating GATT for aperture of size 64M
agp0: aperture size is 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib0: allocated type 3 (0xec000000-0xedffffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xe0000000-0xe7ffffff) for rid 24 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: memory decode 0xec000000-0xedffffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x5333, dev=0x8a25, revid=0x02
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xed000000, size 19, enabled
pcib1: allocated memory range (0xed000000-0xed07ffff) for rid 10 of pci0:1:0:0
map[14]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, enabled
pcib1: allocated prefetch range (0xe0000000-0xe7ffffff) for rid 14 of pci0:1:0:0
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \\_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
vgapci0: <VGA-compatible display> mem
0xed000000-0xed07ffff,0xe0000000-0xe7ffffff irq 10 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2
on pci0
usbus0: <VIA 83C572 USB controller> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3
on pci0
usbus1: <VIA 83C572 USB controller> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
pci0: <bridge> at device 7.4 (no driver attached)
pci0: <multimedia, audio> at device 7.5 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xee000000-0xee0000ff irq 11 at device 12.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: OUI 0x000000, model 0x0000, rev. 0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:06:93:30:03:17
fwohci0: <Lucent FW322/323> mem 0xee001000-0xee001fff irq 5 at device 15.0
on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:60:1d:00:00:30:02:ed
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1514000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:60:1d:30:02:ed
fwe0: bpf attached
fwe0: Ethernet address: 02:60:1d:30:02:ed
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:60:1d:00:00:30:02:ed @ 0xfffe00000000, S400, maxrec
2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment
0.500000000s)
Event timer "RTC" frequency 32768 Hz quality 0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP EPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xc07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xc0000-0xcbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xcc000-0xcc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xcc000-0xcffff) for rid 1 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff pnpid
ORM0000 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: failed to attach P_CNT
device_attach: acpi_throttle0 attach returned 6
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe0:ata0:0:0:0): SIGNATURE: 0000
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0xff msb=0xff
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
(aprobe1:ata1:0:0:0): SIGNATURE: eb14
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <HITACHI DK23CA-20 00H1A0A3> ATA-5 device
ada0: Serial Number 12LB33
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 19077MB (39070080 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
GEOM: new disk ada0
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <HITACHI DK23CA-20 00H1A0A3> ATA-5 device
pass0: Serial Number 12LB33
pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
pass1 at ata1 bus 0 scbus1 target 0 lun 0
pass1: <OIP-SD 2400A/B 5.20> Removable CD-ROM SCSI-0 device
pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <OIP-SD 2400A/B 5.20> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [65793 x 2048 byte records]
Timecounter "TSC" frequency 997478793 Hz quality 800
GEOM: new disk cd0
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
GEOM: ada0s1: media size does not match label.
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
(cd0:ata1:0:0:0): SCSI status error
(cd0:ata1:0:0:0): READ(10). CDB: 28 0 0 1 1 0 0 0 1 0
(cd0:ata1:0:0:0): CAM status: SCSI Status Error
(cd0:ata1:0:0:0): SCSI status: Check Condition
(cd0:ata1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this
track)
(cd0:ata1:0:0:0): Error 6, Unretryable error
(cd0:ata1:0:0:0): cddone: got error 0x6 back
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 00 00 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 00 00 00 00 00 00 10 00
(ada0:ata0:0:0:0): Error 5, Retries exhausted
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Error 5, Retries exhausted
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 3f 02 40 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 3f 02 40 00 00 00 00 10 00
(ada0:ata0:0:0:0): Error 5, Retries exhausted
Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...
start_init: trying /sbin/init
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 80 01 00 40 00 00 00 00 80 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 80 01 00 00 00 00 00 80 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 80 01 00 40 00 00 00 00 80 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 80 01 00 00 00 00 00 80 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 80 01 00 40 00 00 00 00 80 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 80 01 00 00 00 00 00 80 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 80 01 00 40 00 00 00 00 80 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 80 01 00 00 00 00 00 80 00
(ada0:ata0:0:0:0): Retrying command
(ada0:ata0:0:0:0): ATA status error
(ada0:ata0:0:0:0): READ_DMA. ACB: c8 00 80 01 00 40 00 00 00 00 80 00
(ada0:ata0:0:0:0): CAM status: ATA Status Error
(ada0:ata0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 84 (ICRC ABRT )
(ada0:ata0:0:0:0): RES: 51 84 80 01 00 00 00 00 00 80 00
(ada0:ata0:0:0:0): Error 5, Retries exhausted