freebsd stable - Jan 2011 - Fwd: Re: System lockups caused by USB external HDD

----------  Forwarded Message  ----------

Subject: Re: System lockups caused by USB external HDD
Date: Tuesday 25 January 2011, 01:48:03
From: CDP <dr.clau@gmail.com>
To: freebsd-usb@freebsd.org
CC: Hans Petter Selasky <hselasky@c2i.net>, mav@freebsd.org

On 01/24/11 13:27, Hans Petter Selasky wrote:
> On Monday 24 January 2011 12:08:47 CDP wrote:
>> On 01/24/11 11:34, Hans Petter Selasky wrote:
>>> On Monday 24 January 2011 10:00:53 CDP wrote:
>>>> On 01/24/11 01:56, Daniel O'Connor wrote:
>>>>> On 24/01/2011, at 9:10, CDP wrote:
>>>>>> g_vfs_done():da0s2[WRITE(offset=xxxxxxxxxxxx,
length=16384)]error = 5
>>>>>> [several more lines similar to the above]
>>>>>> panic: softdep_move_dependencies: need merge code
>>>>>> cpuid = 0
>>>>>> KDB: stack backtrace:
>>>>>> #0 0x... at kdb_backtrace+0x5e
>>>>>> #1 0x... at panic+0x182
>>>>>
>>>>> It looks like the disk is dying, or the FS is corrupt (the
former might
>>>>> cause the later).
>>>>>
>>>>> Can you run smartctl on the disk? Unfortunately a lot of
enclosures
>>>>> reject SMART commands so you might not be able to :(
>>>>
>>>> I have attached the output of smartctl -d sat -a /dev/da0. I
didn't yet
>>>> run a SMART long test for the simple reason that the disk is
going into
>>>> sleep mode and interrupts it. Haven't bothered to keep it
alive for a
>>>> long test but I might just do that.
>>>>
>>>> Although, I doubt it's a disk failure, since I do backups
on it without
>>>> problems by using FreeBSD 7.3, on the same space where FreeBSD
8.x
>>>> fails. And I am talking about over 150GB of data in one run,
while
>>>> 8.2-RC2 crashes after 5-10GB. I have experienced disk failure
in the
>>>> past, on SATA, and a few read/write errors never caused a
system lockup.
>>>>
>>>> My feeling is that enough traffic on USB causes the problem,
and that
>>>> this problem is only present in the new USB stack.
>>>> Unfortunately downgrading to 7.x is not an option because there
are
>>>> things that won't work on this notebook.
>>>
>>> If you run a simple test like this:
>>>
>>> dd if=/dev/da0 of=/dev/null bs=65536
>>> dd if=/dev/da0 of=/dev/null bs=16384
>>>
>>> Do you then see any errors?
>>>
>>> Do you have a spare USB memory stick which you could run similar
write
>>> tests on?
>>
>> Both reads fail with I/O error, while writes to an unused partition
seem
>> to be fine (I interrupted the writes after a while):
>>
>> % dd if=/dev/da0 of=/dev/null bs=65536
>> dd: /dev/da0: Input/output error
>> 191732+0 records in
>> 191732+0 records out
>> 12565348352 bytes transferred in 429.999272 secs (29221790 bytes/sec)
>>
>> % dd if=/dev/da0 of=/dev/null bs=16384
>> dd: /dev/da0: Input/output error
>> 126427+0 records in
>> 126427+0 records out
>> 2071379968 bytes transferred in 169.431766 secs (12225452 bytes/sec)
>>
>> # dd if=/dev/random of=/dev/da0s3 bs=65536
>> ^C329378+0 records in
>> 329377+0 records out
>> 21586051072 bytes transferred in 1003.020293 secs (21521051 bytes/sec)
>>
>> # dd if=/dev/random of=/dev/da0s3 bs=16384
>> ^C679571+0 records in
>> 679571+0 records out
>> 11134091264 bytes transferred in 690.135793 secs (16133189 bytes/sec)
>>
>> This is what I get in /var/log/messages when the I/O error occurs:
>> (da0:umass-sim0:0:0:0): AutoSense failed
>>
>> However, I experience no lockup. Maybe this situation is not handled
>> correctly at another level ?
> 
> I haven't looked into the code of CAM or GEOM that much so I won't
say too
> much about that. I believe the USB/umass is not to blame. What you could do
is 
> to add a conditional error printout in
"umass_t_bbb_status_callback()" in
> /sys/dev/usb/storage/umass.c when the error happens. If that error is not a
> USB transport error, then we are most likely seeing a SCSI issue in layers 
> above umass. Or if you have access to USB analyser use that. There is now 
also 
> the option to trace USB from the kernel itself, but the feature is in its 
> early development.

The panics I was able to catch/inspect (latest from add_to_worklist() /
ffs_softdep.c) indicated they were thrown by ffs/softupdates code,
therefore I tried disabling softupdates.
The system doesn't panic anymore. The operations on the USB HDD still
stop, but after several tens of seconds the system logs the 'autosense
failed' error, a bunch of write errors, and the copy operation resumes.
md5 shows the copied files are identical to the source files.

In 7.x I don't recall having any kind of errors, neither temporary locks
in disk operations, so I'm guessing the 'autosense failed' situation
is
handled differently in 8.x, compared to 7.x.

Claudiu.


-----------------------------------------