Hello world,
I also have a board with the H55 chipset (see below for dmesg, uname -a and
pciconf -lv).
The specific board is an Intel DH55HC
The network interface card - I tried with em - will not attach to a driver and
the intel driver for Xorg does not recognize the graphics chip of the core i5.
All in all it is rather unpleasant. What might be a different problem is that
the driver for a 3com3c905B and for a Realtek RTL8139 will not attach either.
I am not sure what information is missing but I sure would love to use the
network card in there. Video is yet a different story.
Regards
Christof
==============uname -a:
FreeBSD eri 8.0-STABLE FreeBSD 8.0-STABLE #0: Wed Feb 24 08:33:43 CET 2010
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
==============dmesg:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Wed Feb 24 08:33:43 CET 2010
root@eri:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (3325.02-MHz K8-class
CPU)
Origin = "GenuineIntel" Id = 0x20652 Stepping = 2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x298e3ff<SSE3,<b1>,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,<b25>>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8109768704 (7734 MB)
ACPI APIC Table: <INTEL DH55HC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 5
ACPI Warning: 32/64X FACS address mismatch in FADT - CB626E40/
0CB626D40, using 32 (20100121/tbfadt-586)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DH55HC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf100-0xf107 mem
0xfe000000-0xfe3fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
pci0: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port
0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf irq 18
at device 22.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 22.3 (no driver attached)
pci0: <network, ethernet> at device 25.0 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfe527000-0xfe5273ff irq
16
at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
hdac0: <Intel PCH High Definition Audio Controller> mem
0xfe520000-0xfe523fff
irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100122_0141
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfe526000-0xfe5263ff irq
23
at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ahc0: <Adaptec 2940 SCSI adapter> port 0xe000-0xe0ff mem
0xfe408000-0xfe408fff
irq 18 at device 2.0 on pci3
ahc0: [ITHREAD]
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel PCH AHCI SATA controller> port
0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem
0xfe525000-0xfe5257ff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: [ITHREAD]
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: [ITHREAD]
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROM> at iomem 0xcd000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 10.000 msec
hdac0: HDA Codec #0: Realtek ALC888
hdac0: HDA Codec #3: Intel (Unknown)
ahc0: Someone reset channel A
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0
pcm4: <HDA Intel (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac0
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on
usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <Logitech> at usbus1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on usbus1
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/42.00, addr 3> on
usbus1
ugen1.4: <vendor 0x046d> at usbus1
uaudio0: <vendor 0x046d product 0x08d7, class 0/0, rev 1.10/1.00, addr 4>
on
usbus1
uaudio0: No playback!
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm5: <USB audio> on uaudio0
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <HDS722580VLSA80 V32OA63A> ATA-6 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 78533MB (160836480 512 byte sectors: 16H 63S/T 16383C)
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <SAMSUNG HD322HJ 1AC01118> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from zfs:zroot
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
ugen0.3: <vendor 0x1e3d> at usbus0
umass0: <vendor 0x1e3d Spaceloop 4GB, class 0/0, rev 2.00/1.00, addr 3> on
usbus0
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:7:0:-1: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: < Spaceloop 4GB 5.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 4040MB (8274944 512 byte sectors: 255H 63S/T 515C)
=========================pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x00378086 chip=0x00408086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x00378086 chip=0x00428086
rev=0x12 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
none0@pci0:0:22:0: class=0x078000 card=0x00378086 chip=0x3b648086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
atapci0@pci0:0:22:2: class=0x010185 card=0x00378086 chip=0x3b668086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = mass storage
subclass = ATA
none1@pci0:0:22:3: class=0x070002 card=0x00378086 chip=0x3b678086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = simple comms
subclass = UART
none2@pci0:0:25:0: class=0x020000 card=0x00378086 chip=0x10f08086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
ehci0@pci0:0:26:0: class=0x0c0320 card=0x00378086 chip=0x3b3c8086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
hdac0@pci0:0:27:0: class=0x040300 card=0x00378086 chip=0x3b568086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x00378086 chip=0x3b428086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:4: class=0x060400 card=0x00378086 chip=0x3b4a8086
rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x00378086 chip=0x3b348086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = USB
pcib3@pci0:0:30:0: class=0x060401 card=0x00378086 chip=0x244e8086
rev=0xa6 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to
PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x00378086 chip=0x3b068086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x00378086 chip=0x3b228086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'IBEX AHCI Controller(6Port)'
class = mass storage
subclass = SATA
none3@pci0:0:31:3: class=0x0c0500 card=0x00378086 chip=0x3b308086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
class = serial bus
subclass = SMBus
ahc0@pci0:3:2:0: class=0x010000 card=0x00000000 chip=0x71789004
rev=0x00 hdr=0x00
vendor = 'Adaptec Inc'
device = 'Fast/Fast-Wide SCSI Ctrlr (AHA-2940/2940W)'
class = mass storage
subclass = SCSI
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part.
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20100224/3e6691e0/attachment.pgp