Hi,
I am having a problem with the httpr and AMD64. Not sure if
its a MB issue or something else, but the drives on the controller
are not showing up (ie.. no /dev/da*)
The serial console shows
Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS drive G: is disk4
BIOS drive H: is disk5
BIOS 572kB/3380632kB available memory
there is a 3ware array, 4 SATA drives off the MB and then 2 off the highpoint
hptrr: start channel [0,0]
hptrr: start channel [0,1]
hptrr: start channel [0,2]
hptrr: start channel [0,3]
hptrr: [0 0] Start channel soft reset.
hptrr: [0 1] Start channel soft reset.
hptrr: channel [0,0] started successfully
hptrr: channel [0,1] started successfully
hptrr: [0 2] Failed to perform channel hard reset.
hptrr: [0 3] Failed to perform channel hard reset.
hptrr0: [GIANT-LOCKED]
hptrr0: [ITHREAD]
When doing a boot verbose, it does the following
ad4: 953869MB <Seagate ST31000340AS SD1A> at ata2-master SATA150
ad4: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ad5: 715404MB <Seagate ST3750640AS 3.AAK> at ata2-slave SATA150
ad5: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ad5: Intel check1 failed
ad5: Adaptec check1 failed
ad5: LSI (v3) check1 failed
ad5: LSI (v2) check1 failed
ad5: FreeBSD check1 failed
GEOM: new disk ad5
ata3-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 76319MB <Seagate ST380811AS 3.AAE> at ata3-master SATA150
ad6: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ad7: 715404MB <Seagate ST3750640AS 3.AAK> at ata3-slave SATA150
ad7: 1465149168 sectors [1453521C/16H/63S] 16 sectors/interrupt 1 depth queue
ad7: Intel check1 failed
ad7: Adaptec check1 failed
ad7: LSI (v3) check1 failed
ad7: LSI (v2) check1 failed
ad7: FreeBSD check1 failed
twed0: <Unit 2, RAID5, Normal> on twe0
twed0: 1430817MB (2930313216 sectors)
twed1: <Unit 6, JBOD, Normal> on twe0
twed1: 476940MB (976773168 sectors)
(probe0:hptrr0:0:0:0): error 22
(probe0:hptrr0:0:0:0): Unretryable Error
(probe1:hptrr0:0:1:0): error 22
(probe1:hptrr0:0:1:0): Unretryable Error
(probe2:hptrr0:0:2:0): error 22
(probe2:hptrr0:0:2:0): Unretryable Error
(probe3:hptrr0:0:3:0): error 22
(probe3:hptrr0:0:3:0): Unretryable Error
(probe4:hptrr0:0:4:0): error 22
(probe4:hptrr0:0:4:0): Unretryable Error
(probe5:hptrr0:0:5:0): error 22
(probe5:hptrr0:0:5:0): Unretryable Error
with the probes going to channel 255
I tried a kernel from March 1st and no difference. Is anyone using
this controller with 1TB hard drives on AMD64 ?
---Mike
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike