Alson van der Meulen
2007-Oct-12 16:10 UTC
Unable to boot recent -stable with MSI/MSIX enabled
Hi,
After upgrading from RELENG_6 of 2007-10-01 to 2007-10-10, one of my
computers didn't boot anymore. It failed to mount its root device
because geom_mirror didn't find its volume, and manually specifying one
of the partitions didn't work either. Same with a kernel from today's
-stable sources. The kernel is a GENERIC amd64 kernel plus 'device puc'.
It works if I disable MSI/MSIX support by commenting out these lines in
loader.conf (I added them myself at some point):
hw.pci.enable_msi=1
hw.pci.enable_msix=1
The only relevant commit I could find between 2007-10-01 and 2007-10-10
is the em merge. This box does have an Intel Pro/1000PT (PCIe) NIC. I
believe that the new MSI support in the em driver upsets the ATA driver.
With the 2007-10-01 kernel:
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xdf00
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 56
em0: [MPSAFE]
[...]
ad10: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
[...]
ad14: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
(works)
With 2007-10-12 kernel:
em0: <Intel(R) PRO/1000 Network Connection Version - 6.6.6> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 56
em0: using IRQ 256 for MSI
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
em0: [FAST]
[...]
ad10: 305245MB <Hitachi HDT725032VLA360 4OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
[...]
ad14: 305245MB <Hitachi HDT725032VLA360 4OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
[...]
Manual root filesystem specification:
(fails)
With 2007-10-12 kernel and MSI/MSIX disabled:
em0: <Intel(R) PRO/1000 Network Connection Version - 6.6.6> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 56
em0: [FAST]
[...]
ad10: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
[...]
ad14: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
(works)
Note that the firmware version of the hard drives is different for the
2007-10-12 kernel with MSI support (4OA52A) than for the working
configurations (V54OA52A). Because of this and because it's unable to
mount its root FS with MSI support, I believe that the new MSI support
in the em driver somehow breaks the ATA driver (maybe it screws up
interrupt routing?) on this hardware combination. I'm not sure if this
is a bug in the em driver or in the PCI/ATA driver.
Disabling ACPI also fixes it, but that is probably because MSI/MSIX is
disabled if ACPI is disabled.
Verbose dmesg for the three above cases is included below.
regards,
Alson
-----------------------------------------------------------------------
2007-10-01 kernel with pci/pcix enabled (works):
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #15: Mon Oct 1 22:06:25 CEST 2007
root@tafi.alm.flutnet.org:/usr/obj/usr/src/sys/TAFI
Preloaded elf kernel "/boot/kernel.gd/kernel" at 0xffffffff80adc000.
Preloaded elf obj module "/boot/kernel.gd/geom_mirror.ko" at
0xffffffff80adc1f8.
Preloaded elf obj module "/boot/kernel.gd/cpufreq.ko" at
0xffffffff80adc828.
ACPI APIC Table: <K8T890 ASUSACPI>
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000084029 Hz
CPU: AMD Sempron(tm) Processor 3400+ (2000.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1609433088 (1534 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000bd9000 - 0x000000005d19bfff, 1549545472 bytes (378307 pages)
avail memory = 1541505024 (1470 MB)
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Oct 1 2007 22:06:04)
acpi0: <K8T890 ASUSACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03511106)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB4.U2F3 -> bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEXG.RPXG -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX0.RPX0 -> bus 0 dev 3 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX1.RPX1 -> bus 0 dev 3 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX2.RPX2 -> bus 0 dev 3 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX3.RPX3 -> bus 0 dev 3 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.P2ER -> bus 0 dev 19 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE5C.PE5R -> bus 4 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE6C.PE6R -> bus 4 dev 0 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.AZAC.AZAR -> bus 4 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 1
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12
Validation 0 10 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 6 7 10 11 12
Validation 0 12 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12
Validation 0 11 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0351, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x2210, cachelnsz=8 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x1351, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2351, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3351, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4351, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x5351, revid=0x00
bus=0, slot=0, func=5
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7351, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb999, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xa238, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 27
found-> vendor=0x1106, dev=0xc238, revid=0x00
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 31
found-> vendor=0x1106, dev=0x3349, revid=0x00
bus=0, slot=15, func=0
class=01-06-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 0000ff00, size 3, enabled
map[14]: type 4, range 32, base 0000fe00, size 2, enabled
map[18]: type 4, range 32, base 0000fd00, size 3, enabled
map[1c]: type 4, range 32, base 0000fc00, size 2, enabled
map[20]: type 4, range 32, base 0000fb00, size 4, enabled
map[24]: type 1, range 32, base fdfff000, size 10, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fa00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f900, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f700, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f600, size 5, enabled
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdffe000, size 8, enabled
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3065, revid=0x7c
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fdffd000, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287a, revid=0x00
bus=0, slot=19, func=1
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfde00000-0xfdefffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
bus=3, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ef00, size 3, enabled
pcib3: requested I/O range 0xef00-0xef07: in range
map[14]: type 4, range 32, base 0000ee00, size 2, enabled
pcib3: requested I/O range 0xee00-0xee03: in range
map[18]: type 4, range 32, base 0000ed00, size 3, enabled
pcib3: requested I/O range 0xed00-0xed07: in range
map[1c]: type 4, range 32, base 0000ec00, size 2, enabled
pcib3: requested I/O range 0xec00-0xec03: in range
map[20]: type 4, range 32, base 0000eb00, size 4, enabled
pcib3: requested I/O range 0xeb00-0xeb0f: in range
map[24]: type 1, range 32, base fdefe000, size 13, enabled
pcib3: requested memory range 0xfdefe000-0xfdefffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 28
atapci0: <JMicron JMB363 SATA300 controller> port
0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f mem
0xfdefe000-0xfdefffff irq 28 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeb00
ioapic1: routing intpin 4 (PCI IRQ 28) to vector 49
atapci0: [MPSAFE]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfdefe000
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xef00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xee00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
atapci1: <VIA 8251 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem
0xfdfff000-0xfdfff3ff irq 21 at device 15.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfdfff000
atapci1: AHCI Version 01.00 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: <ATA channel 1> on atapci1
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata7: <ATA channel 2> on atapci1
ata7: SATA connect ready time=0ms
ata7: sata_connect devices=0x1<ATA_MASTER>
ata7: [MPSAFE]
ata8: <ATA channel 3> on atapci1
ata8: SATA connect status=00000000
ata8: [MPSAFE]
atapci2: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f at device 16.0 on
pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf900
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f at device 16.1 on
pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f at device 16.2 on
pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf700
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f at device 16.3 on
pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf600
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffe000-0xfdffe0ff at device
16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfdffe000
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xf400-0xf4ff mem
0xfdffd000-0xfdffd0ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:17:31:23:9f:89
vr0: [MPSAFE]
pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 6
pcib4: I/O decode 0xd000-0xdfff
pcib4: memory decode 0xfdd00000-0xfddfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=4, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTC
pcib4: slot 0 INTC hardwired to IRQ 22
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 0.0 on pci4
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xd000-0xdfff
pcib5: memory decode 0xfdd00000-0xfddfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x8086, dev=0x10b9, revid=0x06
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fdde0000, size 17, enabled
pcib5: requested memory range 0xfdde0000-0xfddfffff: good
pcib4: requested memory range 0xfdde0000-0xfddfffff: good
map[14]: type 1, range 32, base fddc0000, size 17, enabled
pcib5: requested memory range 0xfddc0000-0xfdddffff: good
pcib4: requested memory range 0xfddc0000-0xfdddffff: good
map[18]: type 4, range 32, base 0000df00, size 5, enabled
pcib5: requested I/O range 0xdf00-0xdf1f: in range
pcib4: requested I/O range 0xdf00-0xdf1f: in range
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xdf00
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 56
em0: [MPSAFE]
pcib6: <ACPI PCI-PCI bridge> irq 22 at device 0.1 on pci4
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0x0-0x0
pcib6: prefetched decode 0x0-0x0
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xc000-0xcfff
pcib7: memory decode 0xfdc00000-0xfdcfffff
pcib7: prefetched decode 0xfc000000-0xfcffffff
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x8086, dev=0x1229, revid=0x0c
bus=7, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x8290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdcff000, size 12, enabled
pcib7: requested memory range 0xfdcff000-0xfdcfffff: good
map[14]: type 4, range 32, base 0000cf00, size 6, enabled
pcib7: requested I/O range 0xcf00-0xcf3f: in range
map[18]: type 1, range 32, base fdcc0000, size 17, enabled
pcib7: requested memory range 0xfdcc0000-0xfdcdffff: good
pcib7: matched entry for 7.11.INTA
pcib7: slot 11 INTA hardwired to IRQ 16
found-> vendor=0x1163, dev=0x2000, revid=0x06
bus=7, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 3, range 32, base fc000000, size 24, enabled
pcib7: requested memory range 0xfc000000-0xfcffffff: good
map[14]: type 4, range 32, base 0000c600, size 8, enabled
pcib7: requested I/O range 0xc600-0xc6ff: in range
map[18]: type 1, range 32, base fdc40000, size 18, enabled
pcib7: requested memory range 0xfdc40000-0xfdc7ffff: good
pcib7: matched entry for 7.12.INTA
pcib7: slot 12 INTA hardwired to IRQ 17
found-> vendor=0x9710, dev=0x9835, revid=0x01
bus=7, slot=13, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000ce00, size 3, enabled
pcib7: requested I/O range 0xce00-0xce07: in range
map[14]: type 4, range 32, base 0000cd00, size 3, enabled
pcib7: requested I/O range 0xcd00-0xcd07: in range
map[18]: type 4, range 32, base 0000cc00, size 3, enabled
pcib7: requested I/O range 0xcc00-0xcc07: in range
map[1c]: type 4, range 32, base 0000cb00, size 3, enabled
pcib7: requested I/O range 0xcb00-0xcb07: in range
map[20]: type 4, range 32, base 0000ca00, size 3, enabled
pcib7: requested I/O range 0xca00-0xca07: in range
map[24]: type 4, range 32, base 0000c900, size 4, enabled
pcib7: requested I/O range 0xc900-0xc90f: in range
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xcf00-0xcf3f mem
0xfdcff000-0xfdcfffff,0xfdcc0000-0xfdcdffff irq 16 at device 11.0 on pci7
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdcff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:b3:96:79:ea
fxp0: [MPSAFE]
pci7: <display, VGA> at device 12.0 (no driver attached)
puc0: <NetMos NM9835 Dual UART and 1284 Printer port> port
0xce00-0xce07,0xcd00-0xcd07,0xcc00-0xcc07,0xcb00-0xcb07,0xca00-0xca07,0xc900-0xc90f
at device 13.0 on pci7
pcib7: matched entry for 7.13.INTA
pcib7: slot 13 INTA hardwired to IRQ 18
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 57
puc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xce00
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xcd00
puc0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc00
sio4: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> on puc0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 58
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4061 0x4061 0x4061 0x4061
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
ppc1: using extended I/O port range
ppc1: ECP SPP ECP+EPP SPP
ppc1: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/16 bytes threshold
ppbus1: <Parallel port bus> on ppc1
plip1: <PLIP network interface> on ppbus1
plip1: bpf attached
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xca7ff,0xcb000-0xcc7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 61
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 100780 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 100004207 hz
Timecounter "TSC"em0: Link is up 1000 Mbps Full Duplex
frequency 2000084029 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8251 chip
acd0: setting UDMA33 on 8251 chip
acd0: <LITE-ON DVD SHD-16P1S/GS07> DVDROM drive at ata0 as master
acd0: read 689KB/s (8268KB/s), 1727KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: VIA check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad14: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM_MIRROR: Device gm0 created (id=3317301989).
GEOM_MIRROR: Device gm0: provider ad10s2 detected.
GEOM: new disk ad14
ad14: VIA check1 failed
ad14: Adaptec check1 failed
ad14: LSI (v3) check1 failed
ad14: LSI (v2) check1 failed
ad14: FreeBSD check1 failed
ATA PseudoRAID loaded
GEOM_MIRROR: Device gm0: provider ad14s2 detected.
GEOM_MIRROR: Device gm0: provider ad14s2 activated.
GEOM_MIRROR: Device gm0: provider ad10s2 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
WARNING: Expected rawoffset 0, found 4289355
Trying to mount root from ufs:/dev/mirror/gm0a
start_init: trying /sbin/init
stf0: bpf attached
em0: Link is Down
warning: KLD '/boot/kernel.gd/pflog.ko' is newer than the linker.hints
file
warning: KLD '/boot/kernel.gd/pf.ko' is newer than the linker.hints file
pflog0: bpf attached
em0: Link is up 1000 Mbps Full Duplex
-----------------------------------------------------------------------
2007-10-12 kernel with pci/pcix enabled (fails):
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=02 base=00000000e0000000 len=0000000010001000
SMAP type=03 base=000000005fee3000 len=000000000000d000
SMAP type=04 base=000000005fee0000 len=0000000000003000
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=000000005fef0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000005fde0000
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #17: Fri Oct 12 16:23:26 CEST 2007
root@tafi.alm.flutnet.org:/usr/obj/usr/src/sys/TAFI
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80afb000.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at
0xffffffff80afb1e8.
Preloaded elf obj module "/boot/kernel/cpufreq.ko" at
0xffffffff80afb818.
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000083840 Hz
CPU: AMD Sempron(tm) Processor 3400+ (2000.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1609433088 (1534 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000bf8000 - 0x000000005d19bfff, 1549418496 bytes (378276 pages)
avail memory = 1541378048 (1469 MB)
ACPI APIC Table: <K8T890 ASUSACPI>
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Oct 12 2007 16:23:07)
acpi0: <K8T890 ASUSACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03511106)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.USB4.U2F3 -> bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PEXG.RPXG -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PEX0.RPX0 -> bus 0 dev 3 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PEX1.RPX1 -> bus 0 dev 3 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PEX2.RPX2 -> bus 0 dev 3 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.PEX3.RPX3 -> bus 0 dev 3 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.P2PE.P2ER -> bus 0 dev 19 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.P2PE.PE5C.PE5R -> bus 4 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.P2PE.PE6C.PE6R -> bus 4 dev 0 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.P2PE.AZAC.AZAR -> bus 4 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 1
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12
Validation 0 10 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 6 7 10 11 12
Validation 0 12 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12
Validation 0 11 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0351, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x2210, cachelnsz=8 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x1351, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2351, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3351, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4351, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x5351, revid=0x00
bus=0, slot=0, func=5
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7351, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb999, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xa238, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 27
found-> vendor=0x1106, dev=0xc238, revid=0x00
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 31
found-> vendor=0x1106, dev=0x3349, revid=0x00
bus=0, slot=15, func=0
class=01-06-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 0000ff00, size 3, enabled
map[14]: type 4, range 32, base 0000fe00, size 2, enabled
map[18]: type 4, range 32, base 0000fd00, size 3, enabled
map[1c]: type 4, range 32, base 0000fc00, size 2, enabled
map[20]: type 4, range 32, base 0000fb00, size 4, enabled
map[24]: type 1, range 32, base fdfff000, size 10, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fa00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f900, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f700, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f600, size 5, enabled
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdffe000, size 8, enabled
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3065, revid=0x7c
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fdffd000, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287a, revid=0x00
bus=0, slot=19, func=1
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfde00000-0xfdefffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
bus=3, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ef00, size 3, enabled
pcib3: requested I/O range 0xef00-0xef07: in range
map[14]: type 4, range 32, base 0000ee00, size 2, enabled
pcib3: requested I/O range 0xee00-0xee03: in range
map[18]: type 4, range 32, base 0000ed00, size 3, enabled
pcib3: requested I/O range 0xed00-0xed07: in range
map[1c]: type 4, range 32, base 0000ec00, size 2, enabled
pcib3: requested I/O range 0xec00-0xec03: in range
map[20]: type 4, range 32, base 0000eb00, size 4, enabled
pcib3: requested I/O range 0xeb00-0xeb0f: in range
map[24]: type 1, range 32, base fdefe000, size 13, enabled
pcib3: requested memory range 0xfdefe000-0xfdefffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 28
atapci0: <JMicron JMB363 SATA300 controller> port
0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f mem
0xfdefe000-0xfdefffff irq 28 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeb00
ioapic1: routing intpin 4 (PCI IRQ 28) to vector 49
atapci0: [MPSAFE]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfdefe000
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xef00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xee00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
atapci1: <VIA 8251 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem
0xfdfff000-0xfdfff3ff irq 21 at device 15.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfdfff000
atapci1: AHCI Version 01.00 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: <ATA channel 1> on atapci1
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata7: <ATA channel 2> on atapci1
ata7: SATA connect ready time=0ms
ata7: sata_connect devices=0x1<ATA_MASTER>
ata7: [MPSAFE]
ata8: <ATA channel 3> on atapci1
ata8: SATA connect status=00000000
ata8: [MPSAFE]
atapci2: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f at device 16.0 on
pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf900
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f at device 16.1 on
pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f at device 16.2 on
pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf700
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f at device 16.3 on
pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf600
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffe000-0xfdffe0ff at device
16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfdffe000
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xf400-0xf4ff mem
0xfdffd000-0xfdffd0ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:17:31:23:9f:89
vr0: [MPSAFE]
pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 6
pcib4: I/O decode 0xd000-0xdfff
pcib4: memory decode 0xfdd00000-0xfddfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=4, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTC
pcib4: slot 0 INTC hardwired to IRQ 22
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 0.0 on pci4
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xd000-0xdfff
pcib5: memory decode 0xfdd00000-0xfddfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x8086, dev=0x10b9, revid=0x06
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fdde0000, size 17, enabled
pcib5: requested memory range 0xfdde0000-0xfddfffff: good
pcib4: requested memory range 0xfdde0000-0xfddfffff: good
map[14]: type 1, range 32, base fddc0000, size 17, enabled
pcib5: requested memory range 0xfddc0000-0xfdddffff: good
pcib4: requested memory range 0xfddc0000-0xfdddffff: good
map[18]: type 4, range 32, base 0000df00, size 5, enabled
pcib5: requested I/O range 0xdf00-0xdf1f: in range
pcib4: requested I/O range 0xdf00-0xdf1f: in range
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.6.6> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 56
em0: using IRQ 256 for MSI
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
em0: [FAST]
pcib6: <ACPI PCI-PCI bridge> irq 22 at device 0.1 on pci4
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0x0-0x0
pcib6: prefetched decode 0x0-0x0
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xc000-0xcfff
pcib7: memory decode 0xfdc00000-0xfdcfffff
pcib7: prefetched decode 0xfc000000-0xfcffffff
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x8086, dev=0x1229, revid=0x0c
bus=7, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x8290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdcff000, size 12, enabled
pcib7: requested memory range 0xfdcff000-0xfdcfffff: good
map[14]: type 4, range 32, base 0000cf00, size 6, enabled
pcib7: requested I/O range 0xcf00-0xcf3f: in range
map[18]: type 1, range 32, base fdcc0000, size 17, enabled
pcib7: requested memory range 0xfdcc0000-0xfdcdffff: good
pcib7: matched entry for 7.11.INTA
pcib7: slot 11 INTA hardwired to IRQ 16
found-> vendor=0x1163, dev=0x2000, revid=0x06
bus=7, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 3, range 32, base fc000000, size 24, enabled
pcib7: requested memory range 0xfc000000-0xfcffffff: good
map[14]: type 4, range 32, base 0000c600, size 8, enabled
pcib7: requested I/O range 0xc600-0xc6ff: in range
map[18]: type 1, range 32, base fdc40000, size 18, enabled
pcib7: requested memory range 0xfdc40000-0xfdc7ffff: good
pcib7: matched entry for 7.12.INTA
pcib7: slot 12 INTA hardwired to IRQ 17
found-> vendor=0x9710, dev=0x9835, revid=0x01
bus=7, slot=13, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000ce00, size 3, enabled
pcib7: requested I/O range 0xce00-0xce07: in range
map[14]: type 4, range 32, base 0000cd00, size 3, enabled
pcib7: requested I/O range 0xcd00-0xcd07: in range
map[18]: type 4, range 32, base 0000cc00, size 3, enabled
pcib7: requested I/O range 0xcc00-0xcc07: in range
map[1c]: type 4, range 32, base 0000cb00, size 3, enabled
pcib7: requested I/O range 0xcb00-0xcb07: in range
map[20]: type 4, range 32, base 0000ca00, size 3, enabled
pcib7: requested I/O range 0xca00-0xca07: in range
map[24]: type 4, range 32, base 0000c900, size 4, enabled
pcib7: requested I/O range 0xc900-0xc90f: in range
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xcf00-0xcf3f mem
0xfdcff000-0xfdcfffff,0xfdcc0000-0xfdcdffff irq 16 at device 11.0 on pci7
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdcff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:b3:96:79:ea
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 57
fxp0: [MPSAFE]
pci7: <display, VGA> at device 12.0 (no driver attached)
puc0: <NetMos NM9835 Dual UART and 1284 Printer port> port
0xce00-0xce07,0xcd00-0xcd07,0xcc00-0xcc07,0xcb00-0xcb07,0xca00-0xca07,0xc900-0xc90f
at device 13.0 on pci7
pcib7: matched entry for 7.13.INTA
pcib7: slot 13 INTA hardwired to IRQ 18
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 58
puc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xce00
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xcd00
puc0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc00
sio4: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> on puc0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 59
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4061 0x4061 0x4061 0x4061
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 60
ppc1: using extended I/O port range
ppc1: ECP SPP ECP+EPP SPP
ppc1: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/16 bytes threshold
ppbus1: <Parallel port bus> on ppc1
plip1: <PLIP network interface> on ppbus1
plip1: bpf attached
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xca7ff,0xcb000-0xcc7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 62
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 100772 -> 100000
linprocfs registered
procfs registered
lapic: Divisor 2, Frequency 100004203 hz
Timecounter "TSC" frequency 2000083840 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8251 chip
acd0: setting UDMA33 on 8251 chip
acd0: <LITE-ON DVD SHD-16P1S/GS07> DVDROM drive at ata0 as master
acd0: read 689KB/s (8268KB/s), 1727KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 305245MB <Hitachi HDT725032VLA360 4OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: VIA check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad14: 305245MB <Hitachi HDT725032VLA360 4OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad14
ad14: VIA check1 failed
ad14: Adaptec check1 failed
ad14: LSI (v3) check1 failed
ad14: LSI (v2) check1 failed
ad14: FreeBSD check1 failed
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/mirror/gm0a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem
<fstype>
eg. ufs:/dev/da0a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
Uptime: 28s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
-----------------------------------------------------------------------
2007-10-12 kernel with msi/msix disabled (works):
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #17: Fri Oct 12 16:23:26 CEST 2007
root@tafi.alm.flutnet.org:/usr/obj/usr/src/sys/TAFI
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80afb000.
Preloaded elf obj module "/boot/kernel/geom_mirror.ko" at
0xffffffff80afb1f8.
Preloaded elf obj module "/boot/kernel/cpufreq.ko" at
0xffffffff80afb828.
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000083840 Hz
CPU: AMD Sempron(tm) Processor 3400+ (2000.08-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1609433088 (1534 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000bf8000 - 0x000000005d19bfff, 1549418496 bytes (378276 pages)
avail memory = 1541378048 (1469 MB)
ACPI APIC Table: <K8T890 ASUSACPI>
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Oct 12 2007 16:23:07)
acpi0: <K8T890 ASUSACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03511106)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB4.U2F3 -> bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEXG.RPXG -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX0.RPX0 -> bus 0 dev 3 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX1.RPX1 -> bus 0 dev 3 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX2.RPX2 -> bus 0 dev 3 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PEX3.RPX3 -> bus 0 dev 3 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.P2ER -> bus 0 dev 19 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE5C.PE5R -> bus 4 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE6C.PE6R -> bus 4 dev 0 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.AZAC.AZAR -> bus 4 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 1
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12
Validation 0 10 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 12 N 0 3 4 6 7 10 11 12
Validation 0 12 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12
Validation 0 11 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0351, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x2210, cachelnsz=8 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x1351, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2351, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3351, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4351, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x5351, revid=0x00
bus=0, slot=0, func=5
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0000, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7351, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb999, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x10 (4000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xa238, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 27
found-> vendor=0x1106, dev=0xc238, revid=0x00
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 31
found-> vendor=0x1106, dev=0x3349, revid=0x00
bus=0, slot=15, func=0
class=01-06-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type 4, range 32, base 0000ff00, size 3, enabled
map[14]: type 4, range 32, base 0000fe00, size 2, enabled
map[18]: type 4, range 32, base 0000fd00, size 3, enabled
map[1c]: type 4, range 32, base 0000fc00, size 2, enabled
map[20]: type 4, range 32, base 0000fb00, size 4, enabled
map[24]: type 1, range 32, base fdfff000, size 10, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fa00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f900, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f800, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f700, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x90
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f600, size 5, enabled
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdffe000, size 8, enabled
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3065, revid=0x7c
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000f400, size 8, enabled
map[14]: type 1, range 32, base fdffd000, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287a, revid=0x00
bus=0, slot=19, func=1
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfde00000-0xfdefffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x197b, dev=0x2363, revid=0x02
bus=3, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ef00, size 3, enabled
pcib3: requested I/O range 0xef00-0xef07: in range
map[14]: type 4, range 32, base 0000ee00, size 2, enabled
pcib3: requested I/O range 0xee00-0xee03: in range
map[18]: type 4, range 32, base 0000ed00, size 3, enabled
pcib3: requested I/O range 0xed00-0xed07: in range
map[1c]: type 4, range 32, base 0000ec00, size 2, enabled
pcib3: requested I/O range 0xec00-0xec03: in range
map[20]: type 4, range 32, base 0000eb00, size 4, enabled
pcib3: requested I/O range 0xeb00-0xeb0f: in range
map[24]: type 1, range 32, base fdefe000, size 13, enabled
pcib3: requested memory range 0xfdefe000-0xfdefffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 28
atapci0: <JMicron JMB363 SATA300 controller> port
0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f mem
0xfdefe000-0xfdefffff irq 28 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xeb00
ioapic1: routing intpin 4 (PCI IRQ 28) to vector 49
atapci0: [MPSAFE]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfdefe000
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xef00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xee00
ata4: reset tp1 mask=03 ostat0=60 ostat1=70
ata4: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata4: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata4: reset tp2 stat0=20 stat1=30 devices=0x0
ata4: [MPSAFE]
atapci1: <VIA 8251 SATA300 controller> port
0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem
0xfdfff000-0xfdfff3ff irq 21 at device 15.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfdfff000
atapci1: AHCI Version 01.00 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: SATA connect ready time=0ms
ata5: sata_connect devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: <ATA channel 1> on atapci1
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata7: <ATA channel 2> on atapci1
ata7: SATA connect ready time=0ms
ata7: sata_connect devices=0x1<ATA_MASTER>
ata7: [MPSAFE]
ata8: <ATA channel 3> on atapci1
ata8: SATA connect status=00000000
ata8: [MPSAFE]
atapci2: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f at device 16.0 on
pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf900
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f at device 16.1 on
pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f at device 16.2 on
pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf700
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f at device 16.3 on
pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf600
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfdffe000-0xfdffe0ff at device
16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfdffe000
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xf400-0xf4ff mem
0xfdffd000-0xfdffd0ff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xf400
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:17:31:23:9f:89
vr0: [MPSAFE]
pcib4: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 6
pcib4: I/O decode 0xd000-0xdfff
pcib4: memory decode 0xfdd00000-0xfddfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=4, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=4, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib4: matched entry for 4.0.INTC
pcib4: slot 0 INTC hardwired to IRQ 22
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 0.0 on pci4
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xd000-0xdfff
pcib5: memory decode 0xfdd00000-0xfddfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
found-> vendor=0x8086, dev=0x10b9, revid=0x06
bus=5, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base fdde0000, size 17, enabled
pcib5: requested memory range 0xfdde0000-0xfddfffff: good
pcib4: requested memory range 0xfdde0000-0xfddfffff: good
map[14]: type 1, range 32, base fddc0000, size 17, enabled
pcib5: requested memory range 0xfddc0000-0xfdddffff: good
pcib4: requested memory range 0xfddc0000-0xfdddffff: good
map[18]: type 4, range 32, base 0000df00, size 5, enabled
pcib5: requested I/O range 0xdf00-0xdf1f: in range
pcib4: requested I/O range 0xdf00-0xdf1f: in range
pcib5: matched entry for 5.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.6.6> port
0xdf00-0xdf1f mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 16 at device
0.0 on pci5
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdde0000
em0: bpf attached
em0: Ethernet address: 00:15:17:19:59:e4
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 56
em0: [FAST]
pcib6: <ACPI PCI-PCI bridge> irq 22 at device 0.1 on pci4
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0x0-0x0
pcib6: prefetched decode 0x0-0x0
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xc000-0xcfff
pcib7: memory decode 0xfdc00000-0xfdcfffff
pcib7: prefetched decode 0xfc000000-0xfcffffff
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
found-> vendor=0x8086, dev=0x1229, revid=0x0c
bus=7, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x8290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fdcff000, size 12, enabled
pcib7: requested memory range 0xfdcff000-0xfdcfffff: good
map[14]: type 4, range 32, base 0000cf00, size 6, enabled
pcib7: requested I/O range 0xcf00-0xcf3f: in range
map[18]: type 1, range 32, base fdcc0000, size 17, enabled
pcib7: requested memory range 0xfdcc0000-0xfdcdffff: good
pcib7: matched entry for 7.11.INTA
pcib7: slot 11 INTA hardwired to IRQ 16
found-> vendor=0x1163, dev=0x2000, revid=0x06
bus=7, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 3, range 32, base fc000000, size 24, enabled
pcib7: requested memory range 0xfc000000-0xfcffffff: good
map[14]: type 4, range 32, base 0000c600, size 8, enabled
pcib7: requested I/O range 0xc600-0xc6ff: in range
map[18]: type 1, range 32, base fdc40000, size 18, enabled
pcib7: requested memory range 0xfdc40000-0xfdc7ffff: good
pcib7: matched entry for 7.12.INTA
pcib7: slot 12 INTA hardwired to IRQ 17
found-> vendor=0x9710, dev=0x9835, revid=0x01
bus=7, slot=13, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 0000ce00, size 3, enabled
pcib7: requested I/O range 0xce00-0xce07: in range
map[14]: type 4, range 32, base 0000cd00, size 3, enabled
pcib7: requested I/O range 0xcd00-0xcd07: in range
map[18]: type 4, range 32, base 0000cc00, size 3, enabled
pcib7: requested I/O range 0xcc00-0xcc07: in range
map[1c]: type 4, range 32, base 0000cb00, size 3, enabled
pcib7: requested I/O range 0xcb00-0xcb07: in range
map[20]: type 4, range 32, base 0000ca00, size 3, enabled
pcib7: requested I/O range 0xca00-0xca07: in range
map[24]: type 4, range 32, base 0000c900, size 4, enabled
pcib7: requested I/O range 0xc900-0xc90f: in range
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xcf00-0xcf3f mem
0xfdcff000-0xfdcfffff,0xfdcc0000-0xfdcdffff irq 16 at device 11.0 on pci7
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdcff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 0040 000c
fxp0: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:02:b3:96:79:ea
fxp0: [MPSAFE]
pci7: <display, VGA> at device 12.0 (no driver attached)
puc0: <NetMos NM9835 Dual UART and 1284 Printer port> port
0xce00-0xce07,0xcd00-0xcd07,0xcc00-0xcc07,0xcb00-0xcb07,0xca00-0xca07,0xc900-0xc90f
at device 13.0 on pci7
pcib7: matched entry for 7.13.INTA
pcib7: slot 13 INTA hardwired to IRQ 18
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 57
puc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xce00
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xcd00
puc0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc00
sio4: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9835 Dual UART and 1284 Printer port> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> on puc0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 58
fdc0: [MPSAFE]
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4061 0x4061 0x4061 0x4061
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
ppc1: using extended I/O port range
ppc1: ECP SPP ECP+EPP SPP
ppc1: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc1: FIFO with 16/16/16 bytes threshold
ppbus1: <Parallel port bus> on ppc1
plip1: <PLIP network interface> on ppbus1
plip1: bpf attached
lpt1: <Printer> on ppbus1
lpt1: Interrupt-driven port
ppi1: <Parallel I/O> on ppbus1
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 60
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xca7ff,0xcb000-0xcc7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 61
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: failed to reset the aux device.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 100772 -> 100000
linprocfs registered
procfs registered
lapic: Divisor 2, Frequency 100004200 hz
Timecounter "TSC" frequency 2000083840 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 8251 chip
acd0: setting UDMA33 on 8251 chip
acd0: <LITE-ON DVD SHD-16P1S/GS07> DVDROM drive at ata0 as master
acd0: read 689KB/s (8268KB/s), 1727KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata5-master SATA300
ad10: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad10
ad10: VIA check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad14: 305245MB <Hitachi HDT725032VLA360 V54OA52A> at ata7-master SATA300
ad14: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM_MIRROR: Device gm0 created (id=3317301989).
GEOM_MIRROR: Device gm0: provider ad10s2 detected.
GEOM: new disk ad14
ad14: VIA check1 failed
ad14: Adaptec check1 failed
ad14: LSI (v3) check1 failed
ad14: LSI (v2) check1 failed
ad14: FreeBSD check1 failed
ATA PseudoRAID loaded
GEOM_MIRROR: Device gm0: provider ad14s2 detected.
GEOM_MIRROR: Device gm0: provider ad14s2 activated.
GEOM_MIRROR: Device gm0: provider ad10s2 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
WARNING: Expected rawoffset 0, found 4289355
Trying to mount root from ufs:/dev/mirror/gm0a
start_init: trying /sbin/init
kldload: Unsupported file type
stf0: bpf attached
kldload: Unsupported file type
kldload: Unsupported file type
pflog0: bpf attached
em0: Link is up 1000 Mbps Full Duplex
On 10/12/07, Alson van der Meulen <alson+ml@alm.flutnet.org> wrote:> Hi, > > After upgrading from RELENG_6 of 2007-10-01 to 2007-10-10, one of my > computers didn't boot anymore. It failed to mount its root device > because geom_mirror didn't find its volume, and manually specifying one > of the partitions didn't work either. Same with a kernel from today's > -stable sources. The kernel is a GENERIC amd64 kernel plus 'device puc'. > > It works if I disable MSI/MSIX support by commenting out these lines in > loader.conf (I added them myself at some point): > hw.pci.enable_msi=1 > hw.pci.enable_msix=1 > > The only relevant commit I could find between 2007-10-01 and 2007-10-10 > is the em merge. This box does have an Intel Pro/1000PT (PCIe) NIC. I > believe that the new MSI support in the em driver upsets the ATA driver.Hmmm, so am I correct in understanding that this root is remote, so its really coming in over the the em driver? I remember someone having problems with remote boot/mounts at some point, think it was Sam, but we resolved it, and I don't remember what it was, but it had nothing to do with MSI/X. This is pretty odd, I've never run into anything like it so far. Anyone else with ideas or suggestions? Regards, Jack