Dear FreeBSD gurus,
can anyone point me at a good FM where process of _proper_ setting up
FreeBSD 6-STABLE on 6 Gb RAM machine w/ 2 x Xeon CPU is described? It also
has ICP (former GDT) RAID controller w/RAID-5 configuration (iir0 device).
Purpose: just Apache + mod_perl + MySQL 5.x application server.
Install went fine, system boots, I'm going to try PAE kernel on it. But
somathing makes me doubt that things are going on well...
I.e. I worry about strange messages in dmesg output with regard to ACPI, see
below; will iir0 work with PAE?
Thanks in advanse!
Andrew Stesin
p.s. Personal copy of your reply is greatly appreciated: for some reason a
local mail host hates FreeBSD mailing lists and kills most messages from
them. :(
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE-200606 #0: Sun Jun 4 11:15:14 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <RCC GCHE >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.66GHz (2665.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
Logical CPUs per core: 2
real memory = 4077912064 (3889 MB)
avail memory = 3992907776 (3807 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ACPI-0698: *** Warning: Type override - [DEB_] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [MLIB] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [IO__] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [DATA] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ICNT] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [ACPI] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [IORG] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SB__] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [SIO_] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [PM__] had invalid type (String)
for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [BIOS] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [CMOS] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [KBC_] had invalid type
(Integer) for Scope operator, changed to (Scope)
ACPI-0698: *** Warning: Type override - [OEM_] had invalid type
(Integer) for Scope operator, changed to (Scope)
MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version
1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
acpi0: <RCC GCHE> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0x8f00-0x8f3f mem 0xfe5a0000-0xfe5bffff irq 30 at device 4.0 on pci0
em0: Ethernet address: 00:30:48:52:d4:9e
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe5fe000-0xfe5fefff irq 10 at
device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xfe6f0000-0xfe6fffff irq 31 at device 3.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:30:48:52:d4:9f
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
iir0: <ICP Disk Array Controller> mem 0xfc2fc000-0xfc2fffff irq 22 at
device
2.0 on pci2
iir0: [GIANT-LOCKED]
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0xe000-0xe0ff,0xd800-0xd8ff mem 0xfebfc000-0xfebfdfff irq 16 at device 3.0
on pci4
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
0xe800-0xe8ff,0xe400-0xe4ff mem 0xfebfe000-0xfebfffff irq 17 at device 3.1
on pci4
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7
irq
6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to
settle
acd0: CDROM <ASUS CD-S520/A4/1.21> at ata0-master UDMA33 ses0 at iir0 bus
0
target 6 lun 0
ses0: <ESG-SHV SCA HSBP M15 0.10> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
ses1 at iir0 bus 1 target 6 lun 0
ses1: <ESG-SHV SCA HSBP M15 0.10> Fixed Processor SCSI-2 device
ses1: SAF-TE Compliant Device
da0 at iir0 bus 2 target 0 lun 0
da0: <ICP Host Drive #00 > Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 350025MB (716852430 512 byte sectors: 255H 63S/T 44622C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/da0s1a
em0: link state changed to UP
Pieter de Goeje
2006-Jul-02 22:48 UTC
6-STABLE on 6 Gb RAM 2 x Xeon 3.0 HTT & GDT RAID5 - how?
On Saturday 01 July 2006 21:24, ASTESIN wrote:> Purpose: just Apache + mod_perl + MySQL 5.x application server. > Install went fine, system boots, I'm going to try PAE kernel on it. But > somathing makes me doubt that things are going on well... > > I.e. I worry about strange messages in dmesg output with regard to ACPI,I'm not sure if they're harmful.> see below; will iir0 work with PAE?See PAE(4). According to /usr/src/sys/i386/conf/PAE device iir should work. Regards, Pieter