George Hartzell
2006-Apr-14 18:21 UTC
Sound problem w/ 6.1-RC and ASUS A8V-MX (VIA VT8233X)
I have a new ASUS A8V-MX motherboard that's running 6.1-RC cvsuped
earlier this week. I'm running w/ ACPI enabled, I still see the
problem if I boot w/ ACPI disabled at the loader prompt.
I'm running a kernel based on the standard SMP config file with the
addition of an atapicam device.
I have:
sound_load="YES"
snd_via8233_load="YES"
in /etc/loader.conf
I can listen to audio cd's using cdplay, I think that's just testing
the analog cable from the back of the drive to the motherboard and out
to the headphone jacks. At least I know that I have that much
correct.
None of the gnome apps that I've tried make any sound, either playing
a cd from the drive or an mp3.
If I use a sound app, or "cat /etc/termcap > /dev/dsp" in an
attempt
to make some noise, I get nothing except the following line in
/var/log/messages:
pcm0:play:0:dsp0.0: play interrupt timeout, channel dead
I've attached my dmesg output, my mptable output, and my pciconf -lv
output.
Can anyone help me get this going?
Thanks,
g.
-------------------------cut here-------------------------------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Tue Apr 11 07:26:47 UTC 2006
root@demi.projectbillboard.org:/usr/obj/usr/src/sys/DEMI
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2000.10-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 2147155968 (2047 MB)
avail memory = 2096119808 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA150 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem
0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device
16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device
16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: device problem (SET_ADDR_FAILED), disabling port 7
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem
0xfebff400-0xfebff4ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:15:f2:2c:c3:86
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2
pci4: <ACPI PCI bus> on pcib4
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33
ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150
ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0s1 created (id=3185843744).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider ad4s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-740A 1.01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #0: Tue Apr 11 07:26:47 UTC 2006
root@demi.projectbillboard.org:/usr/obj/usr/src/sys/DEMI
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2000.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 2147155968 (2047 MB)
avail memory = 2096119808 (1999 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 8251 SATA150 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem
0xfebffc00-0xfebfffff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8251 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 22 at device
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device
16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd880-0xd89f irq 23 at device
16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 22 at
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8233X> port 0xd400-0xd4ff irq 22 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem
0xfebff400-0xfebff4ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:15:f2:2c:c3:86
pcib2: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.1 on pci2
pci4: <ACPI PCI bus> on pcib4
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00,
addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33
ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150
ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150
GEOM_MIRROR: Device gm0s1 created (id=3185843744).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider ad4s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 64 files 1
WARNING: /var was not properly dismounted
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR DVDR PX-740A 1.01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
-------------------------cut here-------------------------------------
==============================================================================
MPTable
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000ff780
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x61
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f1020
signature: 'PCMP'
base table length: 316
version: 1.4
checksum: 0x9a
OEM ID: 'ASUSTeK '
Product ID: ''
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 31
local APIC address: 0xfee00000
extended table length: 144
extended table checksum: 138
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x10 BSP, usable 15 11 1 0x178bfbff
1 0x10 AP, usable 15 11 1 0x178bfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 ISA
--
I/O APICs: APIC ID Version State Address
2 0x03 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 5 0 2 0
INT conforms conforms 5 1 2 1
INT conforms conforms 5 0 2 2
INT conforms conforms 5 4 2 4
INT conforms conforms 5 6 2 6
INT conforms conforms 5 7 2 7
INT active-hi edge 5 8 2 8
INT conforms conforms 5 9 2 9
INT conforms conforms 5 12 2 12
INT conforms conforms 5 13 2 13
INT conforms conforms 5 14 2 14
INT conforms conforms 5 15 2 15
INT active-lo level 1 0:A 2 16
INT active-lo level 0 17:C 2 22
INT active-lo level 0 15:B 2 21
INT active-lo level 0 16:A 2 20
INT active-lo level 0 16:C 2 22
INT active-lo level 0 16:B 2 21
INT active-lo level 0 16:D 2 23
INT active-lo level 0 18:A 2 23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT conforms conforms 0 0:A 255 0
NMI conforms conforms 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0xd000
address range: 0x2000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x100
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfda00000
address range: 0x1200000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xf8000000
address range: 0x4000000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xf1900000
address range: 0xc100000
--
Bus Heirarchy
bus ID: 5 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
==============================================================================
-------------------------cut here-------------------------------------
agp0@pci0:0:0: class=0x060000 card=0x02041106 chip=0x02041106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb0@pci0:0:1: class=0x060000 card=0x12041106 chip=0x12041106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:2: class=0x060000 card=0x22041106 chip=0x22041106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:3: class=0x060000 card=0x32041106 chip=0x32041106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:4: class=0x060000 card=0x42041106 chip=0x42041106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:7: class=0x060000 card=0x00000000 chip=0x72041106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8M400 CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1881106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'Apollo K8HTB CPU to AGP 2.0/3.0 Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:15:0: class=0x01018f card=0x33491106 chip=0x33491106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
class = mass storage
subclass = ATA
atapci1@pci0:15:1: class=0x01018a card=0x05711106 chip=0x05711106 rev=0x07
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0@pci0:16:0: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x90
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1@pci0:16:1: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x90
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2@pci0:16:2: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x90
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci3@pci0:16:3: class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x90
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
ehci0@pci0:16:4: class=0x0c0320 card=0x31041106 chip=0x31041106 rev=0x90
hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:17:0: class=0x060100 card=0x32871106 chip=0x32871106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
class = bridge
subclass = PCI-ISA
pcm0@pci0:17:5: class=0x040100 card=0x81b91043 chip=0x30591106 rev=0x70 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
hostb5@pci0:17:7: class=0x060000 card=0x287e1106 chip=0x287e1106 rev=0x00
hdr=0x00
vendor = 'VIA Technologies Inc'
class = bridge
subclass = HOST-PCI
vr0@pci0:18:0: class=0x020000 card=0x80ed1043 chip=0x30651106 rev=0x7c hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
pcib2@pci0:19:0: class=0x060400 card=0x00000000 chip=0x287b1106 rev=0x00
hdr=0x01
vendor = 'VIA Technologies Inc'
class = bridge
subclass = PCI-PCI
hostb6@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport Technology
Configuration'
class = bridge
subclass = HOST-PCI
hostb7@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb8@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb9@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00
hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
none0@pci1:0:0: class=0x030000 card=0x1e41102b chip=0x2527102b rev=0x01 hdr=0x00
vendor = 'Matrox Electronic Systems Ltd.'
device = 'MGA-G550 AGP Chipset'
class = display
subclass = VGA
pcib3@pci2:0:0: class=0x060400 card=0x00000040 chip=0x287c1106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
class = bridge
subclass = PCI-PCI
pcib4@pci2:0:1: class=0x060400 card=0x00000040 chip=0x287d1106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
class = bridge
subclass = PCI-PCI