Nikolay Pavlov
2005-Nov-20 15:34 UTC
ad1: req=0xc2998000 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!
Hi. I have an error after upgrade to FreeBSD 6.0-RELEASE in time of booting:
ad1: req=0xc2998000 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER
Will Robinson !!
swap_pager: indefinite bufobj: 0 blkno: 3 size: 4096
then it's just halt.
But not everytime, sometime it's booting without any problems and i
don't know why..
Here is additional information:
=================================================================================================
# uname -a
FreeBSD spirit 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Fri Nov 11 17:00:05 UTC 2005
root@spirit:/usr/obj/usr/s
rc/sys/SPIRIT i386
===========================================================================================
# atacontrol list
ATA channel 0:
Master: no device present
Slave: ad1 <Maxtor 6E040L0/NAR61590 ATA/ATAPI revision 7
ATA channel 1:
Master: no device present
Slave: no device present
===========================================================================================
#pciconf -vl
hostb0@pci0:0:0: class=0x060000 card=0x25601458 chip=0x25608086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE DRAM Controller / Host-Hub I/F
Bridge'
class = bridge
subclass = HOST-PCI
agp0@pci0:2:0: class=0x030000 card=0x25621458 chip=0x25628086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82845G/GL/GV/GE/PE Integrated Graphics Device'
class = display
subclass = VGA
uhci0@pci0:29:0: class=0x0c0300 card=0x24c21458 chip=0x24c28086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#1'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x24c21458 chip=0x24c48086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#2'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x24c21458 chip=0x24c78086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#3'
class = serial bus
subclass = USB
none0@pci0:29:7: class=0x0c0320 card=0x50061458 chip=0x24cd8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI
Controller'
class = serial bus
subclass = USB
pcib1@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x82
hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub
Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x24c21458 chip=0x24cb8086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL (ICH4/ICH4-L) UltraATA/100 EIDE Controller'
class = mass storage
subclass = ATA
none1@pci0:31:3: class=0x0c0500 card=0x24c21458 chip=0x24c38086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
class = serial bus
subclass = SMBus
em0@pci1:0:0: class=0x020000 card=0x10048086 chip=0x10048086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82543GC Gigabit Ethernet Controller (Copper)'
class = network
subclass = ethernet
rl0@pci1:5:0: class=0x020000 card=0xe0001458 chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
=============================================================================
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Fri Nov 11 17:00:05 UTC 2005
root@spirit.velcom.com:/usr/obj/usr/src/sys/SPIRIT
ACPI APIC Table: <GBT AWRDACPI
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.70GHz (1962.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS
,
HTT,TM
real memory = 535756800 (510 MB)
avail memory = 514940928 (491 MB)
ioapic0 <Version 2.0 irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD irq 9 on acpi0
pci_link4: <ACPI PCI Link LNKE irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF irq 10 on acpi0
pci_link6: <ACPI PCI Link LNK0 irq 0 on acpi0
pci_link7: <ACPI PCI Link LNK1 irq 7 on acpi0
cpu0: <ACPI CPU on acpi0
acpi_button0: <Power Button on acpi0
acpi_button1: <Sleep Button on acpi0
pcib0: <ACPI Host-PCI bridge port 0xcf8-0xcff,0x4000-0x40bf on acpi0
pci0: <ACPI PCI bus on pcib0
agp0: <Intel 82845G (845G GMCH) SVGA controller mem
0xe0000000-0xe7ffffff,0xea000000-0xea07ffff irq 16 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A port 0xd800-0xd81f irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B port 0xd000-0xd01f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C port 0xd400-0xd41f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge at device 30.0 on pci0
pci1: <ACPI PCI bus on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7 mem
0xe9000000-0xe901ffff,0xe9020000-0xe902ffff irq 18 at device 0.0 on
pci1
em0: Ethernet address: 00:03:47:de:54:df
em0: Speed:N/A Duplex:N/A
rl0: <RealTek 8139 10/100BaseTX port 0xc000-0xc0ff mem 0xe9030000-0xe90300ff
irq 21 at device 5.0 on pci1
miibus0: <MII bus on rl0
rlphy0: <RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0d:61:35:11:3e
isab0: <PCI-ISA bridge at device 31.0 on pci0
isa0: <ISA bus on isab0
atapci0: <Intel ICH4 UDMA100 controller port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0 on atapci0
ata1: <ATA channel 1 on atapci0
pci0: <serial bus, SMBus at device 31.3 (no driver attached)
fdc0: <floppy drive controller port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
orm0: <ISA Option ROM at iomem 0xcc000-0xd3fff on isa0
ppc0: parallel port not found.
sc0: <System console at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300
vga0: <Generic ISA VGA at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1962599472 Hz quality 800
Timecounters tick every 1.000 msec
ad1: 39205MB <Maxtor 6E040L0 NAR61590 at ata0-slave UDMA100
=================================================================================================
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.13 2005/04/02 16:37:58 scottl
Exp $
machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident SPIRIT
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
device apic # I/O APIC
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
#======================= POLLING support
=================================options HZ=2000
options DEVICE_POLLING
#======================= PF support ======================================device
pf #PF OpenBSD packet-filter firewall
device pflog #logging support interface for PF
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
#device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters
#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#device ixgb # Intel PRO/10GbE Ethernet Card
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
#device bfe # Broadcom BCM440x 10/100 Ethernet
#device bge # Broadcom BCM570xx Gigabit Ethernet
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device lge # Level 1 LXT1001 gigabit ethernet
#device nge # NatSemi DP83820 gigabit ethernet
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device ti # Alteon Networks Tigon I/II gigabit Ethernet
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vge # VIA VT612x gigabit ethernet
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
#device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#device ex # Intel EtherExpress Pro/10 and Pro/10+
#device ep # Etherlink III based cards
#device fe # Fujitsu MB8696x based cards
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#device lnc # NE2100, NE32-VL Lance Ethernet cards
#device sn # SMC's 9000 series of Ethernet chips
#device xe # Xircom pccard Ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#device wlan # 802.11 support
#device an # Aironet 4500/4800 802.11 wireless NICs.
#device awi # BayStack 660 and others
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
#device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
#device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires mii
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)