Hello, I had a crash on Dell PowerEdge 1850 running apache 1.3 + lighttpd Traffic on em0 is about 50 mbps FreeBSD 5.4-RC3 i386, no SMP compiled in kernel dmesg atached Kernel is GENERIC with following custom settings : cpu I686_CPU maxusers 512 options PERFMON options HZ=2000 options DEVICE_POLLING #options INET6 <<== no IPv6 options IPFILTER options IPFILTER_LOG #ipfilter logging options IPSTEALTH #support for stealth forwarding options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN options ZERO_COPY_SOCKETS sysctl.conf : security.bsd.see_other_uids=0 kern.polling.enable=1 kern.maxfiles=262144 kern.maxfilesperproc=131072 net.inet.ip.redirect=0 net.inet.icmp.drop_redirect=1 net.inet.icmp.log_redirect=1 net.inet.ip.forwarding=1 net.isr.enable=1 kern.ipc.somaxconn=2048 net.inet.icmp.icmplim=5000 kern.random.sys.harvest.ethernet=0 kern.random.sys.harvest.interrupt=0 kern.ipc.nmbclusters=262144 Backtrace : kgdb /boot/kernel/kernel vmcore.0 #0 0xc067114e in doadump () #1 0xc06717e6 in boot () #2 0xc0671aed in panic () #3 0xc0838623 in trap_fatal () #4 0xc0838346 in trap_pfault () #5 0xc0837f2f in trap () #6 0xc08266fa in calltrap () #7 0xe6240018 in ?? () #8 0x00000010 in ?? () #9 0x00000010 in ?? () #10 0x00000001 in ?? () #11 0x00000000 in ?? () #12 0xe62439ac in ?? () #13 0xe6243980 in ?? () #14 0x000031ed in ?? () #15 0xc6a11ca8 in ?? () #16 0x00000fae in ?? () #17 0x00000000 in ?? () #18 0x0000000c in ?? () #19 0x00000000 in ?? () #20 0xc06ac8b0 in m_copydata () #21 0xc071b5c9 in tcp_output () #22 0xc0718d29 in tcp_input () #23 0xc070ffb5 in ip_input () #24 0xc06f4cf3 in netisr_dispatch () #25 0xc06ec682 in ether_demux () #26 0xc06ec3d6 in ether_input () #27 0xc052394e in em_process_receive_interrupts () #28 0xc05201b5 in em_poll_locked () #29 0xc0520255 in em_poll () #30 0xc064e818 in netisr_poll () #31 0xc06f4e7d in swi_net () #32 0xc065a21d in ithread_loop () #33 0xc0659246 in fork_exit () #34 0xc082675c in fork_trampoline () A apologize il this is a bug and if it was corrected between 5.4-RC3 and 5.4-RELEASE... I am updating now... C?dric
On 17/05/2005 17:54, Cedric Tabary wrote:> FreeBSD 5.4-RC3 i386, no SMP compiled in kernel > dmesg atachedOops forgot the dmesg ;) Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RC3 #1: Thu Apr 21 10:01:03 CEST 2005 root@xxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/CED Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073479680 (1023 MB) avail memory = 1040789504 (992 MB) ACPI APIC Table: <DELL PE BKC > ioapic0: Changing APIC ID to 2 ioapic1: Changing APIC ID to 3 ioapic1: WARNING: intbase 32 != expected base 24 ioapic2: Changing APIC ID to 4 ioapic2: WARNING: intbase 64 != expected base 56 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE BKC> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 amr0: <LSILogic MegaRAID 1.51> mem 0xdfee0000-0xdfefffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2 amr0: <LSILogic PERC 4e/Si> Firmware 513O, BIOS H418, 256MB RAM pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xecc0-0xecff mem 0xdfbe0000-0xdfbfffff irq 64 at device 7.0 on pci6 em0: Ethernet address: 00:11:43:36:39:e5 em0: Speed:N/A Duplex:N/A pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pci7: <ACPI PCI bus> on pcib7 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdf9e0000-0xdf9fffff irq 65 at device 8.0 on pci7 em1: Ethernet address: 00:11:43:36:39:e6 em1: Speed:N/A Duplex:N/A pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce800-0xcf7ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2793014175 Hz quality 800 Timecounters tick every 1.000 msec IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled acd0: CDROM <SAMSUNG CD-ROM SN-124/N104> at ata0-master PIO4 amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 69880MB (143114240 sectors) RAID 1 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device Mounting root from ufs:/dev/amrd0s1a em0: Link is up 100 Mbps Full Duplex em1: Link is up 100 Mbps Full Duplex
On Tue, 17 May 2005, Cedric Tabary wrote:> On 17/05/2005 17:54, Cedric Tabary wrote: > > FreeBSD 5.4-RC3 i386, no SMP compiled in kernel > > dmesg atached > > Oops forgot the dmesg ;)Panic & trap messages would be nice too, so we know what address is exploded on.> > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-RC3 #1: Thu Apr 21 10:01:03 CEST 2005 > root@xxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/CED > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1073479680 (1023 MB) > avail memory = 1040789504 (992 MB) > ACPI APIC Table: <DELL PE BKC > > ioapic0: Changing APIC ID to 2 > ioapic1: Changing APIC ID to 3 > ioapic1: WARNING: intbase 32 != expected base 24 > ioapic2: Changing APIC ID to 4 > ioapic2: WARNING: intbase 64 != expected base 56 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 32-55 on motherboard > ioapic2 <Version 2.0> irqs 64-87 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL PE BKC> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > amr0: <LSILogic MegaRAID 1.51> mem 0xdfee0000-0xdfefffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2 > amr0: <LSILogic PERC 4e/Si> Firmware 513O, BIOS H418, 256MB RAM > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib6 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xecc0-0xecff mem 0xdfbe0000-0xdfbfffff irq 64 at device 7.0 on pci6 > em0: Ethernet address: 00:11:43:36:39:e5 > em0: Speed:N/A Duplex:N/A > pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 > pci7: <ACPI PCI bus> on pcib7 > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xdf9e0000-0xdf9fffff irq 65 at device 8.0 on pci7 > em1: Ethernet address: 00:11:43:36:39:e6 > em1: Speed:N/A Duplex:N/A > pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci9: <ACPI PCI bus> on pcib9 > pci9: <display, VGA> at device 13.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce800-0xcf7ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0 > pmtimer0 on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2793014175 Hz quality 800 > Timecounters tick every 1.000 msec > IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled > acd0: CDROM <SAMSUNG CD-ROM SN-124/N104> at ata0-master PIO4 > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 69880MB (143114240 sectors) RAID 1 (optimal) > ses0 at amr0 bus 0 target 6 lun 0 > ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device > ses0: SAF-TE Compliant Device > Mounting root from ufs:/dev/amrd0s1a > em0: Link is up 100 Mbps Full Duplex > em1: Link is up 100 Mbps Full Duplex > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >-- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org