freebsd stable - May 2005 - Can't use AC97 sound in 5.4

Hi list,
Just installed 5.4. it works fine except my AC97 on board sound.

I added a line in /boot/loader.conf :

snd_ich_load="YES"

But when I run xmms, there is always error like:

** WARNING **: oss_open(): Failed to open audio device (/dev/dsp): No
such file or directory

Here is info about my sound card:

# pciconf -lv | grep -B4 audio
none1@pci0:17:5:        class=0x040100 card=0x30051695 chip=0x30591106
rev=0x50 hdr=0x00
    vendor   = 'VIA Technologies Inc'
    device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
    class    = multimedia
    subclass = audio

Any help please.
Thank you,

On Sat, 14 May 2005 21:04:07 +0200
VnPenguin <vnpenguin@gmail.com> wrote:
> Hi list,
> Just installed 5.4. it works fine except my AC97 on board sound.
> 
> I added a line in /boot/loader.conf :
> 
> snd_ich_load="YES"
> 
> But when I run xmms, there is always error like:
> 
> ** WARNING **: oss_open(): Failed to open audio device (/dev/dsp):
> No such file or directory
> 
> Here is info about my sound card:
> 
> # pciconf -lv | grep -B4 audio
> none1@pci0:17:5:        class=0x040100 card=0x30051695
> chip=0x30591106 rev=0x50 hdr=0x00
>     vendor   = 'VIA Technologies Inc'
>     device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio
Controller'
>     class    = multimedia
>     subclass = audio
> 
use snd_via8233_load="YES" instead.


--

Ariff Abdullah
MyBSD

http://www.MyBSD.org.my (IPv6/IPv4)
http://staff.MyBSD.org.my (IPv6/IPv4)
http://tomoyo.MyBSD.org.my (IPv6/IPv4)

Hi,
You've added wrong driver for your sound card.
>From man snd_ich:
----------------------
     The snd_ich driver supports the following audio devices:

      o   AMD 768
      o   AMD 8111
      o   Intel 443MX
      o   Intel ICH
      o   Intel ICH revision 1
      o   Intel ICH2
      o   Intel ICH3
      o   Intel ICH4
      o   Intel ICH5
      o   Intel ICH6
      o   NVIDIA nForce
      o   NVIDIA nForce2
      o   NVIDIA nForce2 400
      o   NVIDIA nForce3
      o   NVIDIA nForce3 250
      o   NVIDIA nForce4
      o   SiS 7012
-----------------------
But in fact you have a VIA sound card :)
The easiest way is add" sound_load="YES" to loader.conf, the
other way is
view the sound driver modules in /boot/kernel and choose what's your.

PS. this question should go to question@ not stable@ :)

On Sat, 14 May 2005, VnPenguin wrote:
> Hi list,
> Just installed 5.4. it works fine except my AC97 on board sound.
>
> I added a line in /boot/loader.conf :
>
> snd_ich_load="YES"
>
> But when I run xmms, there is always error like:
>
> ** WARNING **: oss_open(): Failed to open audio device (/dev/dsp): No
> such file or directory
>
> Here is info about my sound card:
>
> # pciconf -lv | grep -B4 audio
> none1@pci0:17:5:        class=0x040100 card=0x30051695 chip=0x30591106
> rev=0x50 hdr=0x00
>    vendor   = 'VIA Technologies Inc'
>    device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
>    class    = multimedia
>    subclass = audio
>
> Any help please.
> Thank you,
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
>
-----
With best regards,          |            The Power to Serve
Nguyen Tam Chinh            |          http://www.FreeBSD.org
Loc: sp.cs.msu.su           |