Hello, on a box with 3 re interfaces i get a lot of watchdog timeouts and stopping/clow connections. only found 1 or 2 postings with the same problem, but not much replys. the box worked great with 4.x. any suggestions would be very appreziated. many thanks, karl
Karl M. Joch wrote:>Hello, > >on a box with 3 re interfaces i get a lot of watchdog timeouts and >stopping/clow connections. only found 1 or 2 postings with the same problem, >but not much replys. the box worked great with 4.x. > >any suggestions would be very appreziated. >I changed re nic to Intel gigE (em) and had no network problems since. Disabling ACPI might help.
forgot to mention, this 3 cards are onboard because this i a mini-pc. so no chance to replace them :-(. thx.> -----Urspr?ngliche Nachricht----- > Von: Pertti Kosunen [mailto:pertti.kosunen@pp.nic.fi] > Gesendet: Freitag, 07. J?nner 2005 17:21 > An: stable@freebsd.org > Cc: Karl M. Joch > Betreff: Re: 5.3 and re driver problem? > > Karl M. Joch wrote: > > >Hello, > > > >on a box with 3 re interfaces i get a lot of watchdog timeouts and > >stopping/clow connections. only found 1 or 2 postings with > the same problem, > >but not much replys. the box worked great with 4.x. > > > >any suggestions would be very appreziated. > > > > I changed re nic to Intel gigE (em) and had no network problems since. > > Disabling ACPI might help. > >
On Fri, 7 Jan 2005, Karl M. Joch wrote:> forgot to mention, this 3 cards are onboard because this i a mini-pc. so no > chance to replace them :-(.I had to turn off checksum offloading (add "-rxcsum -txcsum" to ifconfig_re0 in /etc/rc.conf) in order to make my on-board interface work. $.02, /Mikko> > thx. > >> -----Urspr?ngliche Nachricht----- >> Von: Pertti Kosunen [mailto:pertti.kosunen@pp.nic.fi] >> Gesendet: Freitag, 07. J?nner 2005 17:21 >> An: stable@freebsd.org >> Cc: Karl M. Joch >> Betreff: Re: 5.3 and re driver problem? >> >> Karl M. Joch wrote: >> >>> Hello, >>> >>> on a box with 3 re interfaces i get a lot of watchdog timeouts and >>> stopping/clow connections. only found 1 or 2 postings with >> the same problem, >>> but not much replys. the box worked great with 4.x. >>> >>> any suggestions would be very appreziated. >>> >> >> I changed re nic to Intel gigE (em) and had no network problems since. >> >> Disabling ACPI might help. >> >> > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Just for the archives if somebody searches this: ifconfig reX inet IP netmask MASK media 100BaseTX medioopt full-duplex -rxcsum -txcsum in rc.conf solved the problem and the interfaces works again. thanks for help, karl> -----Urspr?ngliche Nachricht----- > Von: owner-freebsd-stable@freebsd.org > [mailto:owner-freebsd-stable@freebsd.org] Im Auftrag von > Mikko Ty?l?j?rvi > Gesendet: Samstag, 08. J?nner 2005 06:37 > An: Karl M. Joch > Cc: stable@freebsd.org > Betreff: Re: AW: 5.3 and re driver problem? > > On Fri, 7 Jan 2005, Karl M. Joch wrote: > > > forgot to mention, this 3 cards are onboard because this i > a mini-pc. so no > > chance to replace them :-(. > > I had to turn off checksum offloading (add "-rxcsum -txcsum" to > ifconfig_re0 in /etc/rc.conf) in order to make my on-board interface > work. > > $.02, > /Mikko > > > > > thx. > > > >> -----Urspr?ngliche Nachricht----- > >> Von: Pertti Kosunen [mailto:pertti.kosunen@pp.nic.fi] > >> Gesendet: Freitag, 07. J?nner 2005 17:21 > >> An: stable@freebsd.org > >> Cc: Karl M. Joch > >> Betreff: Re: 5.3 and re driver problem? > >> > >> Karl M. Joch wrote: > >> > >>> Hello, > >>> > >>> on a box with 3 re interfaces i get a lot of watchdog timeouts and > >>> stopping/clow connections. only found 1 or 2 postings with > >> the same problem, > >>> but not much replys. the box worked great with 4.x. > >>> > >>> any suggestions would be very appreziated. > >>> > >> > >> I changed re nic to Intel gigE (em) and had no network > problems since. > >> > >> Disabling ACPI might help. > >> > >> > > > > _______________________________________________ > > freebsd-stable@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > > To unsubscribe, send any mail to > "freebsd-stable-unsubscribe@freebsd.org" > > >