Where did these two lines go? They are required:
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
Matt
----- Original Message -----
From: "Ryan" <bw2003@shaw.ca>
To: <freebsd-stable@freebsd.org>
Sent: Monday, August 09, 2004 9:45 AM
Subject: Kernel Compile Errors
> bash-2.05b# make buildkernel KERNCONF=POTL
>
> --------------------------------------------------------------
> >>> Kernel build for POTL started on Mon Aug 9 09:07:24 EST 2004
> --------------------------------------------------------------
> ===> POTL
>
> ((((Skiping To The End))))
>
>
cc -c -O -pipe -march=pentiumpro -Wall -Wredundant-decls -Wnested-externs -W
strict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual
-fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys
/../include -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilte
r -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2
setdef1.c> touch hack.c
> cc -shared -nostdlib hack.c -o hack.So
> rm -f hack.c
> sh /usr/src/sys/conf/newvers.sh POTL
>
cc -c -O -pipe -march=pentiumpro -Wall -Wredundant-decls -Wnested-externs -W
strict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual
-fformat-extensions -ansi -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys
/../include -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilte
r -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2
vers.c> linking kernel
> kbd.o: In function `kbd_register':
> kbd.o(.text+0x314): undefined reference to `kbddriver_set'
> kbd.o(.text+0x31b): undefined reference to `kbddriver_set'
> kbd.o: In function `kbd_get_switch':
> kbd.o(.text+0x429): undefined reference to `kbddriver_set'
> kbd.o(.text+0x42e): undefined reference to `kbddriver_set'
> kbd.o: In function `kbd_configure':
> kbd.o(.text+0x6b3): undefined reference to `kbddriver_set'
> kbd.o(.text+0x6b8): more undefined references to `kbddriver_set' follow
> *** Error code 1
>
> Stop in /usr/obj/usr/src/sys/POTL.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
>
> --------------------------------------------------------------------------
------>
> (((((Kernel Config))))
>
> machine i386
> cpu I686_CPU
> ident POTL
> maxusers 0
>
> options INET #InterNETworking
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device [keep
this!]> options SOFTUPDATES #Enable FFS soft updates support
> options UFS_DIRHASH #Improve performance on big
directories> options MFS #Memory Filesystem
> options MD_ROOT #MD is a potential root device
> options CD9660 #ISO 9660 Filesystem
> options CD9660_ROOT #CD-ROM usable as root, CD9660
required> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time
extensions> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug> # output. Adds ~128k to driver.
> options AHD_REG_PRETTY_PRINT # Print register bitfields in
debug> # output. Adds ~215k to driver.
>
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> options ATA_STATIC_ID #Static device numbering
>
> device stg # TMC 18C30/18C50
> device scbus # SCSI bus (required)
> device vga0 at isa?
> pseudo-device splash
> device sc0 at isa? flags 0x100
> device agp # support several AGP chipsets
> device npx0 at nexus? port IO_NPX irq 13
> device apm0 at nexus? disable flags 0x20 # Advanced Power
Management> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
> device miibus # MII bus support
> device vr # VIA Rhine, Rhine II
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> pseudo-device md # Memory "disks"
> options MAXDSIZ="(256*1024*1024)"
> options MAXSSIZ="(256*1024*1024)"
> options DFLDSIZ="(256*1024*1024)"
>
> options IPFIREWALL #firewall
> options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
> options IPFIREWALL_FORWARD #enable transparent proxy support
> options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
> options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by
default> options IPFILTER #ipfilter support
> options IPFILTER_LOG #ipfilter logging
> options IPFILTER_DEFAULT_BLOCK #block all packets by default
> options MROUTING # Multicast routing
> options IPSTEALTH #support for stealth forwarding
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
>