freebsd stable - Jan 2004 - ntpd + netclock/2 8182

I'm working on setting up a ntp server using ntpd and a netclock/2 8182.
I found a link to http://phk.freebsd.dk/rover.html from the freebsd.org website.
Which said " lost the contents of my timekeeping pages in a disk-crash, and
since they were badly out of date I have not recovered them."

so are there any kernel configs i should be adding for this project or is the
normal stripped down kernel fine?

btw if anyone would know the pinout for
netclock db9 -> rj45 -> db9 Clock server(PC).

I use almost this configuration. If the 8182 uses the same protocol as
the 8170, this should od the trick.

On stable you need a symlink from
/dev/wwvb1 --> /dev/ttyXX (the port the clock is plugged into). Then add
server 127.127.4.1 to /etc/ntpd.conf. Finally, you need to rebuild the
ntpd image to include the clock driver. (By default ntpd contains only
stubs.)

Go into /usr/src/usr.sbin/ntp/ and change the line 143 from:
/* #undef CLOCK_SPECTRACOM */
to:
#define CLOCK_SPECTRACOM 1

Then make && make install.
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634