Jordan K. Hubbard
1998-Nov-30 15:35 UTC
2.2.8-RELEASE is now available on ftp://ftp.freebsd.org/pub/FreeBSD
It is, as always, my great pleasure to announce the release of FreeBSD 2.2.8, our latest and final release along the 2.2-stable branch. Those folks who are still running 2.1.x and wish to upgrade to 2.2 technology are definitely encouraged to do so now as the 2.2-stable branch has gone into maintainence mode. A number of problems with 2.2.7 have been fixed and the release notes (appended) should be consulted for more information. FreeBSD 2.2.8-RELEASE is available on ftp.freebsd.org and various FTP mirror sites throughout the world. It can also be ordered on CD from Walnut Creek CDROM, from where it will be shipping shortly as a 4 CD set containing a lot of extra stuff of interest to programmers and general users alike. IMPORTANT NOTE: All of the profits from the sales of this CD set go to support the FreeBSD Project! The official FTP distribution site for FreeBSD is: ftp://ftp.FreeBSD.org/pub/FreeBSD Or via the WEB page at: http://www.cdrom.com/pub/FreeBSD And on CD-ROM from Walnut Creek CDROM: Walnut Creek CDROM 4041 Pike Lane, #F Concord CA, 94520 USA Phone: +1 925 674-0783 Fax: +1 925 674-0821 Tech Support: +1 925 603-1234 Email: info@cdrom.com WWW: http://www.cdrom.com/ If you are in Japan, please refer to Pacific HiTech for information on ordering a localized (or the english) version of the 2.2.8 product. Pacific HiTech is now an affiliate of Walnut Creek CDROM for Japanese sales of FreeBSD. Additionally, FreeBSD is available via anonymous FTP from mirror sites in the following countries: Argentina, Australia, Brazil, Bulgaria, Canada, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Hong Kong, Hungary, Iceland, Ireland, Israel, Japan, Korea, Latvia, Malaysia, the Netherlands, Poland, Portugal, Romania, Russia, Slovenia, South Africa, Spain, Sweden, Taiwan, Thailand, the Ukraine and the United Kingdom (and quite possibly several others which I've never even heard of :). Before trying the central FTP site, please check your regional mirror(s) first by going to: ftp://ftp.<yourdomain>.freebsd.org/pub/FreeBSD Any additional mirror sites will be labeled ftp2, ftp3 and so on. The latest versions of export-restricted code for FreeBSD (2.0C or later) (eBones and secure) are also being made available at the following locations. If you are outside the U.S. or Canada, please get secure (DES) and eBones (Kerberos) from one of the following foreign distribution sites: South Africa ftp://ftp.internat.F reeBSD.ORG/pub/FreeBSD ftp://ftp2.internat.FreeBS D.ORG/pub/FreeBSD Brazil ftp://ftp.br.FreeBSD.ORG/p ub/FreeBSD Finland ftp://nic.funet.f i/pub/unix/FreeBSD/eurocrypt =============================================================== RELEASE NOTES FreeBSD 2.2.8-RELEASE VERSION =============================================================== 1. What's new since 2.2.7 ------------------------- Kernel features: ---------------- o Add support for >8G IDE drives. o Add support for 3Com 3c905B ethernet adapters o Add support for PCI ThunderLAN-based ethernet adapters (Compaq/Olicom) o Significantly improve Linux emulator again. Things like QuakeII should just run out-of-the-box now (given the rest of their requirements). o Major changes from -current's pthread implementation merged: This includes file locking based on FILE *, signal fixes, read/write-locks, better POSIX compliance and better performance. o Add a new flexible bandwidth limiter/delay emulator called dummynet. See dummynet(4). o Add support for bridging on multiple interfaces (10 and 100 Mbit/s). See bridge(4). o NFS client accelerator added. See 'nfs_access_cache' in rc.conf(5). Userland features: ------------------ o /bin/sh signal and trap handling reworked. Among other things, this makes tty-mode emacs work when called from system(2), i.e. by a mail agent. o ppp(8) merged from 3.0, adding features like multilink and VPN support as well as fixing a number of known bugs. Security issues: ---------------- o All open CERT/Bugtraq advisories against 2.2.7 have been dealt with. 2. Supported Configurations --------------------------- FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus based PC's, ranging from 386sx to Pentium class machines (though the 386sx is not recommended). Support for generic IDE or ESDI drive configurations, various SCSI controller, network and serial cards is also provided. What follows is a list of all peripherals currently known to work with FreeBSD. Other configurations may also work, we have simply not as yet received confirmation of this. 2.1. Disk Controllers --------------------- WD1003 (any generic MFM/RLL) WD1007 (any generic IDE/ESDI) IDE ATA Adaptec 1535 ISA SCSI controllers Adaptec 154x series ISA SCSI controllers Adaptec 174x series EISA SCSI controller in standard and enhanced mode. Adaptec 274X/284X/2940/3940 (Narrow/Wide/Twin) series ISA/EISA/PCI SCSI controllers. Adaptec AIC7850 on-board SCSI controllers. ** Note: You cannot boot from the SoundBlaster cards as they have no on-board BIOS, such being necessary for mapping the boot device into the system BIOS I/O vectors. They're perfectly usable for external tapes, CDROMs, etc, however. The same goes for any other AIC-6x60 based card without a boot ROM. Some systems DO have a boot ROM, which is generally indicated by some sort of message when the system is first powered up or reset, and in such cases you *will* also be able to boot from them. Check your system/board documentation for more details. Buslogic 545S & 545c Buslogic 445S/445c VLB SCSI controller Buslogic 742A, 747S, 747c EISA SCSI controller. Buslogic 946c PCI SCSI controller Buslogic 956c PCI SCSI controller SymBios (formerly NCR) 53C810, 53C825, 53c860 and 53c875 PCI SCSI controllers: ASUS SC-200 Data Technology DTC3130 (all variants) NCR cards (all) Symbios cards (all) Tekram DC390W, 390U and 390F Tyan S1365 Tekram DC390 and DC390T controllers (maybe other cards based on the AMD 53c974 as well). NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. DTC 3290 EISA SCSI controller in 1542 emulation mode. UltraStor 14F, 24F and 34F SCSI controllers. Seagate ST01/02 SCSI controllers. Future Domain 8xx/950 series SCSI controllers. WD7000 SCSI controller. With all supported SCSI controllers, full support is provided for SCSI-I & SCSI-II peripherals, including Disks, tape drives (including DAT and 8mm Exabyte) and CD ROM drives. The following CD-ROM type systems are supported at this time: (cd) SCSI interface (also includes ProAudio Spectrum and SoundBlaster SCSI) (matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary interface (562/563 models) (scd) Sony proprietary interface (all models) (wcd) ATAPI CDROM interface (acd) ATAPI CD-R interface (alternative to 'wcd') Unmaintained drivers, they might or might not work for your hardware: Adaptec 1510 series ISA SCSI controllers (not for bootable devices) Adaptec 152x series ISA SCSI controllers Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x and SoundBlaster SCSI cards. Floppy tape interface (Colorado/Mountain/Insight) (mcd) Mitsumi proprietary CD-ROM interface (all models) 2.2. Ethernet cards ------------------- Allied-Telesis AT1700 and RE2000 cards AMD PCnet/PCI (79c970 & 53c974 or 79c974) SMC Elite 16 WD8013 ethernet interface, and most other WD8003E, WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT based clones. SMC Elite Ultra. SMC Etherpower II. Texas Instruments ThunderLAN PCI NICs, including the following: Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP DEC EtherWORKS III NICs (DE203, DE204, and DE205) DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422) DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc) DEC FDDI (DEFPA/DEFEA) NICs Fujitsu MB86960A/MB86965A HP PC Lan+ cards (model numbers: 27247B and 27252A). Intel EtherExpress (not recommended due to driver instability) Intel EtherExpress Pro/10 Intel EtherExpress Pro/100B PCI Fast Ethernet Isolan AT 4141-0 (16 bit) Isolink 4110 (8 bit) Novell NE1000, NE2000, and NE2100 ethernet interface. 3Com 3C501 cards 3Com 3C503 Etherlink II 3Com 3c505 Etherlink/+ 3Com 3C507 Etherlink 16/TP 3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B PCI and EISA (Fast) Etherlink III / (Fast) Etherlink XL Toshiba ethernet cards PCMCIA ethernet cards from IBM and National Semiconductor are also supported. No token ring cards are supported at this time. 2.3. Misc --------- AST 4 port serial card using shared IRQ. ARNET 8 port serial card using shared IRQ. ARNET (now Digiboard) Sync 570/i high-speed serial. Boca BB1004 4-Port serial card (Modems NOT supported) Boca IOAT66 6-Port serial card (Modems supported) Boca BB1008 8-Port serial card (Modems NOT supported) Boca BB2016 16-Port serial card (Modems supported) Comtrol Rocketport card. Cyclades Cyclom-y Serial Board. STB 4 port card using shared IRQ. SDL Communications Riscom/8 Serial Board. SDL Communications RISCom/N2 and N2pci high-speed sync serial boards. Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64, ONboard 4/16 and Brumby. Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound and Roland MPU-401 sound cards. Connectix QuickCam Matrox Meteor Video frame grabber Creative Labs Video Spigot frame grabber Cortex1 frame grabber Hauppauge Wincast/TV boards (PCI) STB TV PCI Intel Smart Video Recorder III Various Frame grabbers based on Brooktree Bt848 chip. HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives. PS/2 mice Standard PC Joystick X-10 power controllers GPIB and Transputer drivers. Genius and Mustek hand scanners. FreeBSD currently does NOT support IBM's microchannel (MCA) bus. 3. Obtaining FreeBSD -------------------- You may obtain FreeBSD in a variety of ways: 3.1. FTP/Mail ------------- You can ftp FreeBSD and any or all of its optional packages from `ftp.freebsd.org' - the official FreeBSD release site. For other locations that mirror the FreeBSD software see the file MIRROR.SITES. Please ftp the distribution from the site closest (in networking terms) to you. Additional mirror sites are always welcome! Contact freebsd-admin@FreeBSD.org for more details if you'd like to become an official mirror site. 3.2. CDROM ---------- FreeBSD 3.0-SNAP and 2.2.x-RELEASE CDs may be ordered on CDROM from: Walnut Creek CDROM 4041 Pike Lane, Suite D Concord CA 94520 1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX) Or via the Internet from orders@cdrom.com or http://www.cdrom.com. Their current catalog can be obtained via ftp from: ftp://ftp.cdrom.com/cdrom/catalog Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription. FreeBSD SNAPshot CDs are $39.95 or $14.95 with a FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely separate). With a subscription, you will automatically receive updates as they are released. Your credit card will be billed when each disk is shipped and you may cancel your subscription at any time without further obligation. Shipping (per order not per disc) is $5 in the US, Canada or Mexico and $9.00 overseas. They accept Visa, Mastercard, Discover, American Express or checks in U.S. Dollars and ship COD within the United States. California residents please add 8.25% sales tax. Should you be dissatisfied for any reason, the CD comes with an unconditional return policy. 4. Reporting problems, making suggestions, submitting code. ----------------------------------------------------------- Your suggestions, bug reports and contributions of code are always valued - please do not hesitate to report any problems you may find (preferably with a fix attached, if you can!). The preferred method to submit bug reports from a machine with Internet mail connectivity is to use the send-pr command or use the CGI script at http://www.freebsd.org/send-pr.html. Bug reports will be dutifully filed by our faithful bugfiler program and you can be sure that we'll do our best to respond to all reported bugs as soon as possible. Bugs filed in this way are also visible on our WEB site in the support section and are therefore valuable both as bug reports and as "signposts" for other users concerning potential problems to watch out for. If, for some reason, you are unable to use the send-pr command to submit a bug report, you can try to send it to: freebsd-bugs@FreeBSD.org Note that send-pr itself is a shell script that should be easy to move even onto a totally different system. We much prefer if you could use this interface, since it make it easier to keep track of the problem reports. However, before submitting, please try to make sure whether the problem might have already been fixed since. Otherwise, for any questions or tech support issues, please send mail to: freebsd-questions@FreeBSD.org Additionally, being a volunteer effort, we are always happy to have extra hands willing to help - there are already far more desired enhancements than we'll ever be able to manage by ourselves! To contact us on technical matters, or with offers of help, please send mail to: freebsd-hackers@FreeBSD.org Please note that these mailing lists can experience *significant* amounts of traffic and if you have slow or expensive mail access and are only interested in keeping up with significant FreeBSD events, you may find it preferable to subscribe instead to: freebsd-announce@FreeBSD.org All of the mailing lists can be freely joined by anyone wishing to do so. Send mail to MajorDomo@FreeBSD.org and include the keyword `help' on a line by itself somewhere in the body of the message. This will give you more information on joining the various lists, accessing archives, etc. There are a number of mailing lists targeted at special interest groups not mentioned here, so send mail to majordomo and ask about them! 5. Acknowledgements ------------------- FreeBSD represents the cumulative work of many dozens, if not hundreds, of individuals from around the world who have worked very hard to bring you this release. For a complete list of FreeBSD project staffers, please see: http://www.freebsd.org/handbook/staff.html or, if you've loaded the doc distribution: file:/usr/share/doc/handbook/staff.html Special mention to: The donors listed at http://www.freebsd.org/handbook/donors.html Everyone at Montana State University for their initial support. And to the many thousands of FreeBSD users and testers all over the world, without whom this release simply would not have been possible. We sincerely hope you enjoy this release of FreeBSD! The FreeBSD Project This is the moderated mailing list freebsd-announce. The list contains announcements of new FreeBSD capabilities, important events and project milestones. See also the FreeBSD Web pages at http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-announce" in the body of the message