Lzo is a much faster compression algorithm than gzib, so would allow
more users to enable transparent compression, and some users can
choose from compression ratio and compression speed.
Usage:
# mount -t btrfs -o compress[=<zlib,lzo>] dev /mnt
or
# mount -t btrfs -o compress-force[=<zlib,lzo>] dev /mnt
"-o compress" without argument is still allowed for compatability.
Performance:
The test copied a linux source tarball (~400M) from an ext4 partition
to the btrfs partition, and then extracted the tarball.
(time in second)
lzo zlib nocompress
copy: 10.6 21.7 14.9
extract: 70.1 94.4 66.6
(data size in MB)
lzo zlib nocompress
copy: 185.87 108.69 394.49
extract: 193.80 132.36 381.21
Other:
The defrag ioctl is also updated, so one can choose lzo or zlib when
turning on compression in defrag operation.
TODO:
- Update btrfs-progs accordingly.
---
fs/btrfs/Makefile | 2 +-
fs/btrfs/btrfs_inode.h | 2 +-
fs/btrfs/compression.c | 329 +++++++++++++++++++++++++++++++++++++-
fs/btrfs/compression.h | 72 ++++++--
fs/btrfs/ctree.h | 11 +-
fs/btrfs/extent_io.c | 5 +-
fs/btrfs/extent_io.h | 17 ++-
fs/btrfs/extent_map.c | 2 +
fs/btrfs/extent_map.h | 3 +-
fs/btrfs/file.c | 2 +
fs/btrfs/inode.c | 82 ++++++----
fs/btrfs/ioctl.c | 10 +-
fs/btrfs/ioctl.h | 9 +-
fs/btrfs/lzo.c | 409 +++++++++++++++++++++++++++++++++++++++++++++++
fs/btrfs/ordered-data.c | 18 ++-
fs/btrfs/ordered-data.h | 8 +-
fs/btrfs/super.c | 47 +++++-
fs/btrfs/zlib.c | 361 +++++++----------------------------------
18 files changed, 1013 insertions(+), 376 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
- Fix a race that can result in alloc_workspace > cpus.
- Fix to check num_workspace after wakeup.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
---
fs/btrfs/zlib.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index b9cd544..e5b8b22 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -75,16 +75,19 @@ again:
return workspace;
}
- spin_unlock(&workspace_lock);
if (atomic_read(&alloc_workspace) > cpus) {
DEFINE_WAIT(wait);
+
+ spin_unlock(&workspace_lock);
prepare_to_wait(&workspace_wait, &wait, TASK_UNINTERRUPTIBLE);
- if (atomic_read(&alloc_workspace) > cpus)
+ if (atomic_read(&alloc_workspace) > cpus && !num_workspace)
schedule();
finish_wait(&workspace_wait, &wait);
goto again;
}
atomic_inc(&alloc_workspace);
+ spin_unlock(&workspace_lock);
+
workspace = kzalloc(sizeof(*workspace), GFP_NOFS);
if (!workspace) {
ret = -ENOMEM;
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Make the code aware of compression type, instead of always assuming
zlib compression.
Also make the zlib workspace function as common code for all
compression types.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
---
fs/btrfs/btrfs_inode.h | 2 +-
fs/btrfs/compression.c | 236 ++++++++++++++++++++++++++++++++++++++++++-
fs/btrfs/compression.h | 66 +++++++++----
fs/btrfs/ctree.h | 10 +-
fs/btrfs/extent_io.c | 5 +-
fs/btrfs/extent_io.h | 17 +++-
fs/btrfs/extent_map.c | 2 +
fs/btrfs/extent_map.h | 3 +-
fs/btrfs/file.c | 2 +
fs/btrfs/inode.c | 82 ++++++++++------
fs/btrfs/ioctl.c | 4 +-
fs/btrfs/ordered-data.c | 18 +++-
fs/btrfs/ordered-data.h | 8 ++-
fs/btrfs/super.c | 41 +++++++-
fs/btrfs/zlib.c | 253 +++++++++-------------------------------------
15 files changed, 472 insertions(+), 277 deletions(-)
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 6ad63f1..ccc991c 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -157,7 +157,7 @@ struct btrfs_inode {
/*
* always compress this one file
*/
- unsigned force_compress:1;
+ unsigned force_compress:4;
struct inode vfs_inode;
};
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index cb3877c..4c6068b 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -62,6 +62,9 @@ struct compressed_bio {
/* number of bytes on disk */
unsigned long compressed_len;
+ /* the compression algorithm for this bio */
+ int compress_type;
+
/* number of compressed pages in the array */
unsigned long nr_pages;
@@ -186,11 +189,12 @@ static void end_compressed_bio_read(struct bio *bio, int
err)
/* ok, we''re the last bio for this extent, lets start
* the decompression.
*/
- ret = btrfs_zlib_decompress_biovec(cb->compressed_pages,
- cb->start,
- cb->orig_bio->bi_io_vec,
- cb->orig_bio->bi_vcnt,
- cb->compressed_len);
+ ret = btrfs_decompress_biovec(cb->compress_type,
+ cb->compressed_pages,
+ cb->start,
+ cb->orig_bio->bi_io_vec,
+ cb->orig_bio->bi_vcnt,
+ cb->compressed_len);
csum_failed:
if (ret)
cb->errors = 1;
@@ -611,6 +615,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct
bio *bio,
cb->len = uncompressed_len;
cb->compressed_len = compressed_len;
+ cb->compress_type = extent_compress_type(bio_flags);
cb->orig_bio = bio;
nr_pages = (compressed_len + PAGE_CACHE_SIZE - 1) /
@@ -700,3 +705,224 @@ int btrfs_submit_compressed_read(struct inode *inode,
struct bio *bio,
bio_put(comp_bio);
return 0;
}
+
+static struct list_head comp_idle_workspace[BTRFS_COMPRESS_TYPES];
+static spinlock_t comp_workspace_lock[BTRFS_COMPRESS_TYPES];
+static int comp_num_workspace[BTRFS_COMPRESS_TYPES];
+static atomic_t comp_alloc_workspace[BTRFS_COMPRESS_TYPES];
+static wait_queue_head_t comp_workspace_wait[BTRFS_COMPRESS_TYPES];
+
+struct btrfs_compress_op *btrfs_compress_op[] = {
+ &btrfs_zlib_compress,
+};
+
+int __init btrfs_init_compress(void)
+{
+ int i;
+
+ for (i = 0; i < BTRFS_COMPRESS_TYPES; i++) {
+ INIT_LIST_HEAD(&comp_idle_workspace[i]);
+ spin_lock_init(&comp_workspace_lock[i]);
+ atomic_set(&comp_alloc_workspace[i], 0);
+ init_waitqueue_head(&comp_workspace_wait[i]);
+ }
+ return 0;
+}
+
+/*
+ * this finds an available workspace or allocates a new one
+ * ERR_PTR is returned if things go bad.
+ */
+static struct list_head *find_workspace(int type)
+{
+ struct list_head *workspace;
+ int cpus = num_online_cpus();
+ int idx = type - 1;
+
+ struct list_head *idle_workspace = &comp_idle_workspace[idx];
+ spinlock_t *workspace_lock = &comp_workspace_lock[idx];
+ atomic_t *alloc_workspace = &comp_alloc_workspace[idx];
+ wait_queue_head_t *workspace_wait = &comp_workspace_wait[idx];
+ int *num_workspace = &comp_num_workspace[idx];
+again:
+ spin_lock(workspace_lock);
+ if (!list_empty(idle_workspace)) {
+ workspace = idle_workspace->next;
+ list_del(workspace);
+ (*num_workspace)--;
+ spin_unlock(workspace_lock);
+ return workspace;
+
+ }
+ if (atomic_read(alloc_workspace) > cpus) {
+ DEFINE_WAIT(wait);
+
+ spin_unlock(workspace_lock);
+ prepare_to_wait(workspace_wait, &wait, TASK_UNINTERRUPTIBLE);
+ if (atomic_read(alloc_workspace) > cpus && !*num_workspace)
+ schedule();
+ finish_wait(workspace_wait, &wait);
+ goto again;
+ }
+ atomic_inc(alloc_workspace);
+ spin_unlock(workspace_lock);
+
+ workspace = btrfs_compress_op[idx]->alloc_workspace();
+ if (IS_ERR(workspace)) {
+ atomic_dec(alloc_workspace);
+ wake_up(workspace_wait);
+ }
+ return workspace;
+}
+
+/*
+ * put a workspace struct back on the list or free it if we have enough
+ * idle ones sitting around
+ */
+static void free_workspace(int type, struct list_head *workspace)
+{
+ int idx = type - 1;
+ struct list_head *idle_workspace = &comp_idle_workspace[idx];
+ spinlock_t *workspace_lock = &comp_workspace_lock[idx];
+ atomic_t *alloc_workspace = &comp_alloc_workspace[idx];
+ wait_queue_head_t *workspace_wait = &comp_workspace_wait[idx];
+ int *num_workspace = &comp_num_workspace[idx];
+
+ spin_lock(workspace_lock);
+ if (*num_workspace < num_online_cpus()) {
+ list_add_tail(workspace, idle_workspace);
+ (*num_workspace)++;
+ spin_unlock(workspace_lock);
+ goto wake;
+ }
+ spin_unlock(workspace_lock);
+
+ btrfs_compress_op[idx]->free_workspace(workspace);
+ atomic_dec(alloc_workspace);
+wake:
+ if (waitqueue_active(workspace_wait))
+ wake_up(workspace_wait);
+}
+
+/*
+ * cleanup function for module exit
+ */
+static void free_workspaces(void)
+{
+ struct list_head *workspace;
+ int i;
+
+ for (i = 0; i < BTRFS_COMPRESS_TYPES; i++) {
+ while (!list_empty(&comp_idle_workspace[i])) {
+ workspace = comp_idle_workspace[i].next;
+ list_del(workspace);
+ btrfs_compress_op[i]->free_workspace(workspace);
+ atomic_dec(&comp_alloc_workspace[i]);
+ }
+ }
+}
+
+/*
+ * given an address space and start/len, compress the bytes.
+ *
+ * pages are allocated to hold the compressed result and stored
+ * in ''pages''
+ *
+ * out_pages is used to return the number of pages allocated. There
+ * may be pages allocated even if we return an error
+ *
+ * total_in is used to return the number of bytes actually read. It
+ * may be smaller then len if we had to exit early because we
+ * ran out of room in the pages array or because we cross the
+ * max_out threshold.
+ *
+ * total_out is used to return the total number of compressed bytes
+ *
+ * max_out tells us the max number of bytes that we''re allowed to
+ * stuff into pages
+ */
+int btrfs_compress_pages(int type, struct address_space *mapping,
+ u64 start, unsigned long len,
+ struct page **pages,
+ unsigned long nr_dest_pages,
+ unsigned long *out_pages,
+ unsigned long *total_in,
+ unsigned long *total_out,
+ unsigned long max_out)
+{
+ struct list_head *workspace;
+ int ret;
+
+ workspace = find_workspace(type);
+ if (IS_ERR(workspace))
+ return -1;
+
+ ret = btrfs_compress_op[type-1]->compress_pages(workspace, mapping,
+ start, len, pages,
+ nr_dest_pages, out_pages,
+ total_in, total_out,
+ max_out);
+ free_workspace(type, workspace);
+ return ret;
+}
+
+/*
+ * pages_in is an array of pages with compressed data.
+ *
+ * disk_start is the starting logical offset of this array in the file
+ *
+ * bvec is a bio_vec of pages from the file that we want to decompress into
+ *
+ * vcnt is the count of pages in the biovec
+ *
+ * srclen is the number of bytes in pages_in
+ *
+ * The basic idea is that we have a bio that was created by readpages.
+ * The pages in the bio are for the uncompressed data, and they may not
+ * be contiguous. They all correspond to the range of bytes covered by
+ * the compressed extent.
+ */
+int btrfs_decompress_biovec(int type, struct page **pages_in, u64 disk_start,
+ struct bio_vec *bvec, int vcnt, size_t srclen)
+{
+ struct list_head *workspace;
+ int ret;
+
+ workspace = find_workspace(type);
+ if (IS_ERR(workspace))
+ return -ENOMEM;
+
+ ret = btrfs_compress_op[type-1]->decompress_biovec(workspace, pages_in,
+ disk_start,
+ bvec, vcnt, srclen);
+ free_workspace(type, workspace);
+ return ret;
+}
+
+/*
+ * a less complex decompression routine. Our compressed data fits in a
+ * single page, and we want to read a single page out of it.
+ * start_byte tells us the offset into the compressed data we''re
interested in
+ */
+int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page,
+ unsigned long start_byte, size_t srclen, size_t destlen)
+{
+ struct list_head *workspace;
+ int ret;
+
+ workspace = find_workspace(type);
+ if (IS_ERR(workspace))
+ return -ENOMEM;
+
+ ret = btrfs_compress_op[type-1]->decompress(workspace, data_in,
+ dest_page, start_byte,
+ srclen, destlen);
+
+ free_workspace(type, workspace);
+ return ret;
+}
+
+void __exit btrfs_exit_compress(void)
+{
+ free_workspaces();
+}
diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
index 421f5b4..9b5f2f3 100644
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -19,24 +19,22 @@
#ifndef __BTRFS_COMPRESSION_
#define __BTRFS_COMPRESSION_
-int btrfs_zlib_decompress(unsigned char *data_in,
- struct page *dest_page,
- unsigned long start_byte,
- size_t srclen, size_t destlen);
-int btrfs_zlib_compress_pages(struct address_space *mapping,
- u64 start, unsigned long len,
- struct page **pages,
- unsigned long nr_dest_pages,
- unsigned long *out_pages,
- unsigned long *total_in,
- unsigned long *total_out,
- unsigned long max_out);
-int btrfs_zlib_decompress_biovec(struct page **pages_in,
- u64 disk_start,
- struct bio_vec *bvec,
- int vcnt,
- size_t srclen);
-void btrfs_zlib_exit(void);
+int btrfs_init_compress(void);
+void btrfs_exit_compress(void);
+
+int btrfs_compress_pages(int type, struct address_space *mapping,
+ u64 start, unsigned long len,
+ struct page **pages,
+ unsigned long nr_dest_pages,
+ unsigned long *out_pages,
+ unsigned long *total_in,
+ unsigned long *total_out,
+ unsigned long max_out);
+int btrfs_decompress_biovec(int type, struct page **pages_in, u64 disk_start,
+ struct bio_vec *bvec, int vcnt, size_t srclen);
+int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page,
+ unsigned long start_byte, size_t srclen, size_t destlen);
+
int btrfs_submit_compressed_write(struct inode *inode, u64 start,
unsigned long len, u64 disk_start,
unsigned long compressed_len,
@@ -44,4 +42,36 @@ int btrfs_submit_compressed_write(struct inode *inode, u64
start,
unsigned long nr_pages);
int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
int mirror_num, unsigned long bio_flags);
+
+struct btrfs_compress_op {
+ struct list_head *(*alloc_workspace)(void);
+
+ void (*free_workspace)(struct list_head *workspace);
+
+ int (*compress_pages)(struct list_head *workspace,
+ struct address_space *mapping,
+ u64 start, unsigned long len,
+ struct page **pages,
+ unsigned long nr_dest_pages,
+ unsigned long *out_pages,
+ unsigned long *total_in,
+ unsigned long *total_out,
+ unsigned long max_out);
+
+ int (*decompress_biovec)(struct list_head *workspace,
+ struct page **pages_in,
+ u64 disk_start,
+ struct bio_vec *bvec,
+ int vcnt,
+ size_t srclen);
+
+ int (*decompress)(struct list_head *workspace,
+ unsigned char *data_in,
+ struct page *dest_page,
+ unsigned long start_byte,
+ size_t srclen, size_t destlen);
+};
+
+extern struct btrfs_compress_op btrfs_zlib_compress;
+
#endif
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index e9bf864..b0f8b4d 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -528,9 +528,10 @@ struct btrfs_timespec {
} __attribute__ ((__packed__));
enum btrfs_compression_type {
- BTRFS_COMPRESS_NONE = 0,
- BTRFS_COMPRESS_ZLIB = 1,
- BTRFS_COMPRESS_LAST = 2,
+ BTRFS_COMPRESS_NONE = 0,
+ BTRFS_COMPRESS_ZLIB = 1,
+ BTRFS_COMPRESS_TYPES = 1,
+ BTRFS_COMPRESS_LAST = 2,
};
struct btrfs_inode_item {
@@ -857,7 +858,8 @@ struct btrfs_fs_info {
*/
u64 last_trans_log_full_commit;
u64 open_ioctl_trans;
- unsigned long mount_opt;
+ unsigned long mount_opt:20;
+ unsigned long compress_type:4;
u64 max_inline;
u64 alloc_start;
struct btrfs_transaction *running_transaction;
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 41277d6..56eba19 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -2072,8 +2072,11 @@ static int __extent_read_full_page(struct extent_io_tree
*tree,
BUG_ON(extent_map_end(em) <= cur);
BUG_ON(end < cur);
- if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
+ if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
this_bio_flag = EXTENT_BIO_COMPRESSED;
+ extent_set_compress_type(&this_bio_flag,
+ em->compress_type);
+ }
iosize = min(extent_map_end(em) - cur, end - cur + 1);
cur_end = min(extent_map_end(em) - 1, end);
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 5691c7b..65f06c8 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -20,8 +20,12 @@
#define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
#define EXTENT_CTLBITS (EXTENT_DO_ACCOUNTING | EXTENT_FIRST_DELALLOC)
-/* flags for bio submission */
+/*
+ * flags for bio submission. The high bits indicate the compression
+ * type for this bio
+ */
#define EXTENT_BIO_COMPRESSED 1
+#define EXTENT_BIO_FLAG_SHIFT 16
/* these are bit numbers for test/set bit */
#define EXTENT_BUFFER_UPTODATE 0
@@ -135,6 +139,17 @@ struct extent_buffer {
wait_queue_head_t lock_wq;
};
+static inline void extent_set_compress_type(unsigned long *bio_flags,
+ int compress_type)
+{
+ *bio_flags |= compress_type << EXTENT_BIO_FLAG_SHIFT;
+}
+
+static inline int extent_compress_type(unsigned long bio_flags)
+{
+ return bio_flags >> EXTENT_BIO_FLAG_SHIFT;
+}
+
struct extent_map_tree;
static inline struct extent_state *extent_state_next(struct extent_state
*state)
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index 23cb8da..b0e1fce 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -3,6 +3,7 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/hardirq.h>
+#include "ctree.h"
#include "extent_map.h"
@@ -54,6 +55,7 @@ struct extent_map *alloc_extent_map(gfp_t mask)
return em;
em->in_tree = 0;
em->flags = 0;
+ em->compress_type = BTRFS_COMPRESS_NONE;
atomic_set(&em->refs, 1);
return em;
}
diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h
index ab6d74b..28b44db 100644
--- a/fs/btrfs/extent_map.h
+++ b/fs/btrfs/extent_map.h
@@ -26,7 +26,8 @@ struct extent_map {
unsigned long flags;
struct block_device *bdev;
atomic_t refs;
- int in_tree;
+ unsigned int in_tree:1;
+ unsigned int compress_type:4;
};
struct extent_map_tree {
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 7f29464..8585a72 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -220,6 +220,7 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start,
u64 end,
split->bdev = em->bdev;
split->flags = flags;
+ split->compress_type = em->compress_type;
ret = add_extent_mapping(em_tree, split);
BUG_ON(ret);
free_extent_map(split);
@@ -234,6 +235,7 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start,
u64 end,
split->len = em->start + em->len - (start + len);
split->bdev = em->bdev;
split->flags = flags;
+ split->compress_type = em->compress_type;
if (compressed) {
split->block_len = em->block_len;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 32ae852..c2fb4be 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -122,10 +122,10 @@ static noinline int insert_inline_extent(struct
btrfs_trans_handle *trans,
size_t cur_size = size;
size_t datasize;
unsigned long offset;
- int use_compress = 0;
+ int compress_type = BTRFS_COMPRESS_NONE;
if (compressed_size && compressed_pages) {
- use_compress = 1;
+ compress_type = root->fs_info->compress_type;
cur_size = compressed_size;
}
@@ -159,7 +159,7 @@ static noinline int insert_inline_extent(struct
btrfs_trans_handle *trans,
btrfs_set_file_extent_ram_bytes(leaf, ei, size);
ptr = btrfs_file_extent_inline_start(ei);
- if (use_compress) {
+ if (compress_type != BTRFS_COMPRESS_NONE) {
struct page *cpage;
int i = 0;
while (compressed_size > 0) {
@@ -176,7 +176,7 @@ static noinline int insert_inline_extent(struct
btrfs_trans_handle *trans,
compressed_size -= cur_size;
}
btrfs_set_file_extent_compression(leaf, ei,
- BTRFS_COMPRESS_ZLIB);
+ compress_type);
} else {
page = find_get_page(inode->i_mapping,
start >> PAGE_CACHE_SHIFT);
@@ -263,6 +263,7 @@ struct async_extent {
u64 compressed_size;
struct page **pages;
unsigned long nr_pages;
+ int compress_type;
struct list_head list;
};
@@ -280,7 +281,8 @@ static noinline int add_async_extent(struct async_cow *cow,
u64 start, u64 ram_size,
u64 compressed_size,
struct page **pages,
- unsigned long nr_pages)
+ unsigned long nr_pages,
+ int compress_type)
{
struct async_extent *async_extent;
@@ -290,6 +292,7 @@ static noinline int add_async_extent(struct async_cow *cow,
async_extent->compressed_size = compressed_size;
async_extent->pages = pages;
async_extent->nr_pages = nr_pages;
+ async_extent->compress_type = compress_type;
list_add_tail(&async_extent->list, &cow->extents);
return 0;
}
@@ -332,6 +335,7 @@ static noinline int compress_file_range(struct inode *inode,
unsigned long max_uncompressed = 128 * 1024;
int i;
int will_compress;
+ int compress_type = root->fs_info->compress_type;
actual_end = min_t(u64, isize, end + 1);
again:
@@ -381,12 +385,16 @@ again:
WARN_ON(pages);
pages = kzalloc(sizeof(struct page *) * nr_pages, GFP_NOFS);
- ret = btrfs_zlib_compress_pages(inode->i_mapping, start,
- total_compressed, pages,
- nr_pages, &nr_pages_ret,
- &total_in,
- &total_compressed,
- max_compressed);
+ if (BTRFS_I(inode)->force_compress)
+ compress_type = BTRFS_I(inode)->force_compress;
+
+ ret = btrfs_compress_pages(compress_type,
+ inode->i_mapping, start,
+ total_compressed, pages,
+ nr_pages, &nr_pages_ret,
+ &total_in,
+ &total_compressed,
+ max_compressed);
if (!ret) {
unsigned long offset = total_compressed &
@@ -493,7 +501,8 @@ again:
* and will submit them to the elevator.
*/
add_async_extent(async_cow, start, num_bytes,
- total_compressed, pages, nr_pages_ret);
+ total_compressed, pages, nr_pages_ret,
+ compress_type);
if (start + num_bytes < end && start + num_bytes < actual_end)
{
start += num_bytes;
@@ -515,7 +524,8 @@ cleanup_and_bail_uncompressed:
__set_page_dirty_nobuffers(locked_page);
/* unlocked later on in the async handlers */
}
- add_async_extent(async_cow, start, end - start + 1, 0, NULL, 0);
+ add_async_extent(async_cow, start, end - start + 1,
+ 0, NULL, 0, BTRFS_COMPRESS_NONE);
*num_added += 1;
}
@@ -640,6 +650,7 @@ retry:
em->block_start = ins.objectid;
em->block_len = ins.offset;
em->bdev = root->fs_info->fs_devices->latest_bdev;
+ em->compress_type = async_extent->compress_type;
set_bit(EXTENT_FLAG_PINNED, &em->flags);
set_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
@@ -656,11 +667,13 @@ retry:
async_extent->ram_size - 1, 0);
}
- ret = btrfs_add_ordered_extent(inode, async_extent->start,
- ins.objectid,
- async_extent->ram_size,
- ins.offset,
- BTRFS_ORDERED_COMPRESSED);
+ ret = btrfs_add_ordered_extent_compress(inode,
+ async_extent->start,
+ ins.objectid,
+ async_extent->ram_size,
+ ins.offset,
+ BTRFS_ORDERED_COMPRESSED,
+ async_extent->compress_type);
BUG_ON(ret);
/*
@@ -1650,7 +1663,7 @@ static int btrfs_finish_ordered_io(struct inode *inode,
u64 start, u64 end)
struct btrfs_ordered_extent *ordered_extent = NULL;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
struct extent_state *cached_state = NULL;
- int compressed = 0;
+ int compress_type = 0;
int ret;
ret = btrfs_dec_test_ordered_pending(inode, &ordered_extent, start,
@@ -1681,9 +1694,9 @@ static int btrfs_finish_ordered_io(struct inode *inode,
u64 start, u64 end)
trans->block_rsv = &root->fs_info->delalloc_block_rsv;
if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered_extent->flags))
- compressed = 1;
+ compress_type = ordered_extent->compress_type;
if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) {
- BUG_ON(compressed);
+ BUG_ON(compress_type);
ret = btrfs_mark_extent_written(trans, inode,
ordered_extent->file_offset,
ordered_extent->file_offset +
@@ -1696,7 +1709,7 @@ static int btrfs_finish_ordered_io(struct inode *inode,
u64 start, u64 end)
ordered_extent->disk_len,
ordered_extent->len,
ordered_extent->len,
- compressed, 0, 0,
+ compress_type, 0, 0,
BTRFS_FILE_EXTENT_REG);
unpin_extent_cache(&BTRFS_I(inode)->extent_tree,
ordered_extent->file_offset,
@@ -1792,6 +1805,8 @@ static int btrfs_io_failed_hook(struct bio *failed_bio,
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags)) {
logical = em->block_start;
failrec->bio_flags = EXTENT_BIO_COMPRESSED;
+ extent_set_compress_type(&failrec->bio_flags,
+ em->compress_type);
}
failrec->logical = logical;
free_extent_map(em);
@@ -4878,8 +4893,10 @@ static noinline int uncompress_inline(struct btrfs_path
*path,
size_t max_size;
unsigned long inline_size;
unsigned long ptr;
+ int compress_type;
WARN_ON(pg_offset != 0);
+ compress_type = btrfs_file_extent_compression(leaf, item);
max_size = btrfs_file_extent_ram_bytes(leaf, item);
inline_size = btrfs_file_extent_inline_item_len(leaf,
btrfs_item_nr(leaf, path->slots[0]));
@@ -4889,8 +4906,8 @@ static noinline int uncompress_inline(struct btrfs_path
*path,
read_extent_buffer(leaf, tmp, ptr, inline_size);
max_size = min_t(unsigned long, PAGE_CACHE_SIZE, max_size);
- ret = btrfs_zlib_decompress(tmp, page, extent_offset,
- inline_size, max_size);
+ ret = btrfs_decompress(compress_type, tmp, page,
+ extent_offset, inline_size, max_size);
if (ret) {
char *kaddr = kmap_atomic(page, KM_USER0);
unsigned long copy_size = min_t(u64,
@@ -4932,7 +4949,7 @@ struct extent_map *btrfs_get_extent(struct inode *inode,
struct page *page,
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
struct btrfs_trans_handle *trans = NULL;
- int compressed;
+ int compress_type;
again:
read_lock(&em_tree->lock);
@@ -4991,7 +5008,7 @@ again:
found_type = btrfs_file_extent_type(leaf, item);
extent_start = found_key.offset;
- compressed = btrfs_file_extent_compression(leaf, item);
+ compress_type = btrfs_file_extent_compression(leaf, item);
if (found_type == BTRFS_FILE_EXTENT_REG ||
found_type == BTRFS_FILE_EXTENT_PREALLOC) {
extent_end = extent_start +
@@ -5037,8 +5054,9 @@ again:
em->block_start = EXTENT_MAP_HOLE;
goto insert;
}
- if (compressed) {
+ if (compress_type != BTRFS_COMPRESS_NONE) {
set_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
+ em->compress_type = compress_type;
em->block_start = bytenr;
em->block_len = btrfs_file_extent_disk_num_bytes(leaf,
item);
@@ -5072,12 +5090,14 @@ again:
em->len = (copy_size + root->sectorsize - 1) &
~((u64)root->sectorsize - 1);
em->orig_start = EXTENT_MAP_INLINE;
- if (compressed)
+ if (compress_type) {
set_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
+ em->compress_type = compress_type;
+ }
ptr = btrfs_file_extent_inline_start(item) + extent_offset;
if (create == 0 && !PageUptodate(page)) {
- if (btrfs_file_extent_compression(leaf, item) =- BTRFS_COMPRESS_ZLIB)
{
+ if (btrfs_file_extent_compression(leaf, item) !+ BTRFS_COMPRESS_NONE)
{
ret = uncompress_inline(path, inode, page,
pg_offset,
extent_offset, item);
@@ -6253,7 +6273,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb)
ei->ordered_data_close = 0;
ei->orphan_meta_reserved = 0;
ei->dummy_inode = 0;
- ei->force_compress = 0;
+ ei->force_compress = BTRFS_COMPRESS_NONE;
inode = &ei->vfs_inode;
extent_map_tree_init(&ei->extent_tree, GFP_NOFS);
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index ca52cfe..ecc49ee 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -585,7 +585,7 @@ static int btrfs_defrag_file(struct file *file,
total_read++;
mutex_lock(&inode->i_mutex);
if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
- BTRFS_I(inode)->force_compress = 1;
+ BTRFS_I(inode)->force_compress = BTRFS_COMPRESS_ZLIB;
ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
if (ret)
@@ -683,7 +683,7 @@ loop_unlock:
atomic_dec(&root->fs_info->async_submit_draining);
mutex_lock(&inode->i_mutex);
- BTRFS_I(inode)->force_compress = 0;
+ BTRFS_I(inode)->force_compress = BTRFS_COMPRESS_NONE;
mutex_unlock(&inode->i_mutex);
}
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index 5ebffc4..68c88ea 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -172,7 +172,7 @@ static inline struct rb_node *tree_search(struct
btrfs_ordered_inode_tree *tree,
*/
static int __btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len,
- int type, int dio)
+ int type, int dio, int compress_type)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
@@ -189,6 +189,7 @@ static int __btrfs_add_ordered_extent(struct inode *inode,
u64 file_offset,
entry->disk_len = disk_len;
entry->bytes_left = len;
entry->inode = inode;
+ entry->compress_type = compress_type;
if (type != BTRFS_ORDERED_IO_DONE && type != BTRFS_ORDERED_COMPLETE)
set_bit(type, &entry->flags);
@@ -220,14 +221,25 @@ int btrfs_add_ordered_extent(struct inode *inode, u64
file_offset,
u64 start, u64 len, u64 disk_len, int type)
{
return __btrfs_add_ordered_extent(inode, file_offset, start, len,
- disk_len, type, 0);
+ disk_len, type, 0,
+ BTRFS_COMPRESS_NONE);
}
int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len, int type)
{
return __btrfs_add_ordered_extent(inode, file_offset, start, len,
- disk_len, type, 1);
+ disk_len, type, 1,
+ BTRFS_COMPRESS_NONE);
+}
+
+int btrfs_add_ordered_extent_compress(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len,
+ int type, int compress_type)
+{
+ return __btrfs_add_ordered_extent(inode, file_offset, start, len,
+ disk_len, type, 0,
+ compress_type);
}
/*
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 8ac3654..47ba440 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -68,7 +68,7 @@ struct btrfs_ordered_sum {
#define BTRFS_ORDERED_NOCOW 2 /* set when we want to write in place */
-#define BTRFS_ORDERED_COMPRESSED 3 /* writing a compressed extent */
+#define BTRFS_ORDERED_COMPRESSED 3 /* writing a zlib compressed extent */
#define BTRFS_ORDERED_PREALLOC 4 /* set when writing to prealloced extent */
@@ -93,6 +93,9 @@ struct btrfs_ordered_extent {
/* flags (described above) */
unsigned long flags;
+ /* compression algorithm */
+ int compress_type;
+
/* reference count */
atomic_t refs;
@@ -145,6 +148,9 @@ int btrfs_add_ordered_extent(struct inode *inode, u64
file_offset,
u64 start, u64 len, u64 disk_len, int type);
int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len, int type);
+int btrfs_add_ordered_extent_compress(struct inode *inode, u64 file_offset,
+ u64 start, u64 len, u64 disk_len,
+ int type, int compress_type);
int btrfs_add_ordered_sum(struct inode *inode,
struct btrfs_ordered_extent *entry,
struct btrfs_ordered_sum *sum);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index d50f813..a2e5c79 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -69,8 +69,8 @@ enum {
Opt_degraded, Opt_subvol, Opt_subvolid, Opt_device, Opt_nodatasum,
Opt_nodatacow, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd,
Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, Opt_compress,
- Opt_compress_force, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
- Opt_discard, Opt_err,
+ Opt_compress_type, Opt_compress_force, Opt_compress_force_type,
+ Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard, Opt_err,
};
static match_table_t tokens = {
@@ -85,7 +85,9 @@ static match_table_t tokens = {
{Opt_alloc_start, "alloc_start=%s"},
{Opt_thread_pool, "thread_pool=%d"},
{Opt_compress, "compress"},
+ {Opt_compress_type, "compress=%s"},
{Opt_compress_force, "compress-force"},
+ {Opt_compress_force_type, "compress-force=%s"},
{Opt_ssd, "ssd"},
{Opt_ssd_spread, "ssd_spread"},
{Opt_nossd, "nossd"},
@@ -108,6 +110,7 @@ int btrfs_parse_options(struct btrfs_root *root, char
*options)
char *p, *num, *orig;
int intarg;
int ret = 0;
+ char *compress_type;
if (!options)
return 0;
@@ -151,11 +154,31 @@ int btrfs_parse_options(struct btrfs_root *root, char
*options)
btrfs_set_opt(info->mount_opt, NODATASUM);
break;
case Opt_compress:
- printk(KERN_INFO "btrfs: use compression\n");
+ case Opt_compress_type:
+ if (token == Opt_compress ||
+ strcmp(args[0].from, "zlib") == 0) {
+ compress_type = "zlib";
+ info->compress_type = BTRFS_COMPRESS_ZLIB;
+ } else {
+ ret = -EINVAL;
+ goto out;
+ }
+ printk(KERN_INFO "btrfs: use %s compression\n",
+ compress_type);
btrfs_set_opt(info->mount_opt, COMPRESS);
break;
case Opt_compress_force:
- printk(KERN_INFO "btrfs: forcing compression\n");
+ case Opt_compress_force_type:
+ if (token == Opt_compress_force ||
+ strcmp(args[0].from, "zlib") == 0) {
+ compress_type = "zlib";
+ info->compress_type = BTRFS_COMPRESS_ZLIB;
+ } else {
+ ret = -EINVAL;
+ goto out;
+ }
+ printk(KERN_INFO "btrfs: force %s compression\n",
+ compress_type);
btrfs_set_opt(info->mount_opt, FORCE_COMPRESS);
btrfs_set_opt(info->mount_opt, COMPRESS);
break;
@@ -840,10 +863,14 @@ static int __init init_btrfs_fs(void)
if (err)
return err;
- err = btrfs_init_cachep();
+ err = btrfs_init_compress();
if (err)
goto free_sysfs;
+ err = btrfs_init_cachep();
+ if (err)
+ goto free_compress;
+
err = extent_io_init();
if (err)
goto free_cachep;
@@ -871,6 +898,8 @@ free_extent_io:
extent_io_exit();
free_cachep:
btrfs_destroy_cachep();
+free_compress:
+ btrfs_exit_compress();
free_sysfs:
btrfs_exit_sysfs();
return err;
@@ -885,7 +914,7 @@ static void __exit exit_btrfs_fs(void)
unregister_filesystem(&btrfs_fs_type);
btrfs_exit_sysfs();
btrfs_cleanup_fs_uuids();
- btrfs_zlib_exit();
+ btrfs_exit_compress();
}
module_init(init_btrfs_fs)
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index e5b8b22..3d8c501 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -32,15 +32,6 @@
#include <linux/bio.h>
#include "compression.h"
-/* Plan: call deflate() with avail_in == *sourcelen,
- avail_out = *dstlen - 12 and flush == Z_FINISH.
- If it doesn''t manage to finish, call it again with
- avail_in == 0 and avail_out set to the remaining 12
- bytes for it to clean up.
- Q: Is 12 bytes sufficient?
-*/
-#define STREAM_END_SPACE 12
-
struct workspace {
z_stream inf_strm;
z_stream def_strm;
@@ -48,155 +39,51 @@ struct workspace {
struct list_head list;
};
-static LIST_HEAD(idle_workspace);
-static DEFINE_SPINLOCK(workspace_lock);
-static unsigned long num_workspace;
-static atomic_t alloc_workspace = ATOMIC_INIT(0);
-static DECLARE_WAIT_QUEUE_HEAD(workspace_wait);
+static void zlib_free_workspace(struct list_head *ws)
+{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
-/*
- * this finds an available zlib workspace or allocates a new one
- * NULL or an ERR_PTR is returned if things go bad.
- */
-static struct workspace *find_zlib_workspace(void)
+ vfree(workspace->def_strm.workspace);
+ vfree(workspace->inf_strm.workspace);
+ kfree(workspace->buf);
+ kfree(workspace);
+}
+
+static struct list_head *zlib_alloc_workspace(void)
{
struct workspace *workspace;
- int ret;
- int cpus = num_online_cpus();
-
-again:
- spin_lock(&workspace_lock);
- if (!list_empty(&idle_workspace)) {
- workspace = list_entry(idle_workspace.next, struct workspace,
- list);
- list_del(&workspace->list);
- num_workspace--;
- spin_unlock(&workspace_lock);
- return workspace;
-
- }
- if (atomic_read(&alloc_workspace) > cpus) {
- DEFINE_WAIT(wait);
-
- spin_unlock(&workspace_lock);
- prepare_to_wait(&workspace_wait, &wait, TASK_UNINTERRUPTIBLE);
- if (atomic_read(&alloc_workspace) > cpus && !num_workspace)
- schedule();
- finish_wait(&workspace_wait, &wait);
- goto again;
- }
- atomic_inc(&alloc_workspace);
- spin_unlock(&workspace_lock);
workspace = kzalloc(sizeof(*workspace), GFP_NOFS);
- if (!workspace) {
- ret = -ENOMEM;
- goto fail;
- }
+ if (!workspace)
+ return ERR_PTR(-ENOMEM);
workspace->def_strm.workspace = vmalloc(zlib_deflate_workspacesize());
- if (!workspace->def_strm.workspace) {
- ret = -ENOMEM;
- goto fail;
- }
workspace->inf_strm.workspace = vmalloc(zlib_inflate_workspacesize());
- if (!workspace->inf_strm.workspace) {
- ret = -ENOMEM;
- goto fail_inflate;
- }
workspace->buf = kmalloc(PAGE_CACHE_SIZE, GFP_NOFS);
- if (!workspace->buf) {
- ret = -ENOMEM;
- goto fail_kmalloc;
- }
- return workspace;
-
-fail_kmalloc:
- vfree(workspace->inf_strm.workspace);
-fail_inflate:
- vfree(workspace->def_strm.workspace);
-fail:
- kfree(workspace);
- atomic_dec(&alloc_workspace);
- wake_up(&workspace_wait);
- return ERR_PTR(ret);
-}
-
-/*
- * put a workspace struct back on the list or free it if we have enough
- * idle ones sitting around
- */
-static int free_workspace(struct workspace *workspace)
-{
- spin_lock(&workspace_lock);
- if (num_workspace < num_online_cpus()) {
- list_add_tail(&workspace->list, &idle_workspace);
- num_workspace++;
- spin_unlock(&workspace_lock);
- if (waitqueue_active(&workspace_wait))
- wake_up(&workspace_wait);
- return 0;
- }
- spin_unlock(&workspace_lock);
- vfree(workspace->def_strm.workspace);
- vfree(workspace->inf_strm.workspace);
- kfree(workspace->buf);
- kfree(workspace);
+ if (!workspace->def_strm.workspace ||
+ !workspace->inf_strm.workspace || !workspace->buf)
+ goto fail;
- atomic_dec(&alloc_workspace);
- if (waitqueue_active(&workspace_wait))
- wake_up(&workspace_wait);
- return 0;
-}
+ INIT_LIST_HEAD(&workspace->list);
-/*
- * cleanup function for module exit
- */
-static void free_workspaces(void)
-{
- struct workspace *workspace;
- while (!list_empty(&idle_workspace)) {
- workspace = list_entry(idle_workspace.next, struct workspace,
- list);
- list_del(&workspace->list);
- vfree(workspace->def_strm.workspace);
- vfree(workspace->inf_strm.workspace);
- kfree(workspace->buf);
- kfree(workspace);
- atomic_dec(&alloc_workspace);
- }
+ return &workspace->list;
+fail:
+ zlib_free_workspace(&workspace->list);
+ return ERR_PTR(-ENOMEM);
}
-/*
- * given an address space and start/len, compress the bytes.
- *
- * pages are allocated to hold the compressed result and stored
- * in ''pages''
- *
- * out_pages is used to return the number of pages allocated. There
- * may be pages allocated even if we return an error
- *
- * total_in is used to return the number of bytes actually read. It
- * may be smaller then len if we had to exit early because we
- * ran out of room in the pages array or because we cross the
- * max_out threshold.
- *
- * total_out is used to return the total number of compressed bytes
- *
- * max_out tells us the max number of bytes that we''re allowed to
- * stuff into pages
- */
-int btrfs_zlib_compress_pages(struct address_space *mapping,
- u64 start, unsigned long len,
- struct page **pages,
- unsigned long nr_dest_pages,
- unsigned long *out_pages,
- unsigned long *total_in,
- unsigned long *total_out,
- unsigned long max_out)
+static int zlib_compress_pages(struct list_head *ws,
+ struct address_space *mapping,
+ u64 start, unsigned long len,
+ struct page **pages,
+ unsigned long nr_dest_pages,
+ unsigned long *out_pages,
+ unsigned long *total_in,
+ unsigned long *total_out,
+ unsigned long max_out)
{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
int ret;
- struct workspace *workspace;
char *data_in;
char *cpage_out;
int nr_pages = 0;
@@ -208,10 +95,6 @@ int btrfs_zlib_compress_pages(struct address_space *mapping,
*total_out = 0;
*total_in = 0;
- workspace = find_zlib_workspace();
- if (IS_ERR(workspace))
- return -1;
-
if (Z_OK != zlib_deflateInit(&workspace->def_strm, 3)) {
printk(KERN_WARNING "deflateInit failed\n");
ret = -1;
@@ -317,35 +200,18 @@ out:
kunmap(in_page);
page_cache_release(in_page);
}
- free_workspace(workspace);
return ret;
}
-/*
- * pages_in is an array of pages with compressed data.
- *
- * disk_start is the starting logical offset of this array in the file
- *
- * bvec is a bio_vec of pages from the file that we want to decompress into
- *
- * vcnt is the count of pages in the biovec
- *
- * srclen is the number of bytes in pages_in
- *
- * The basic idea is that we have a bio that was created by readpages.
- * The pages in the bio are for the uncompressed data, and they may not
- * be contiguous. They all correspond to the range of bytes covered by
- * the compressed extent.
- */
-int btrfs_zlib_decompress_biovec(struct page **pages_in,
- u64 disk_start,
- struct bio_vec *bvec,
- int vcnt,
- size_t srclen)
+static int zlib_decompress_biovec(struct list_head *ws, struct page **pages_in,
+ u64 disk_start,
+ struct bio_vec *bvec,
+ int vcnt,
+ size_t srclen)
{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
int ret = 0;
int wbits = MAX_WBITS;
- struct workspace *workspace;
char *data_in;
size_t total_out = 0;
unsigned long page_bytes_left;
@@ -363,10 +229,6 @@ int btrfs_zlib_decompress_biovec(struct page **pages_in,
unsigned long current_buf_start;
char *kaddr;
- workspace = find_zlib_workspace();
- if (IS_ERR(workspace))
- return -ENOMEM;
-
data_in = kmap(pages_in[page_in_index]);
workspace->inf_strm.next_in = data_in;
workspace->inf_strm.avail_in = min_t(size_t, srclen, PAGE_CACHE_SIZE);
@@ -392,8 +254,7 @@ int btrfs_zlib_decompress_biovec(struct page **pages_in,
if (Z_OK != zlib_inflateInit2(&workspace->inf_strm, wbits)) {
printk(KERN_WARNING "inflateInit failed\n");
- ret = -1;
- goto out;
+ return -1;
}
while (workspace->inf_strm.total_in < srclen) {
ret = zlib_inflate(&workspace->inf_strm, Z_NO_FLUSH);
@@ -519,35 +380,21 @@ done:
zlib_inflateEnd(&workspace->inf_strm);
if (data_in)
kunmap(pages_in[page_in_index]);
-out:
- free_workspace(workspace);
return ret;
}
-/*
- * a less complex decompression routine. Our compressed data fits in a
- * single page, and we want to read a single page out of it.
- * start_byte tells us the offset into the compressed data we''re
interested in
- */
-int btrfs_zlib_decompress(unsigned char *data_in,
- struct page *dest_page,
- unsigned long start_byte,
- size_t srclen, size_t destlen)
+static int zlib_decompress(struct list_head *ws, unsigned char *data_in,
+ struct page *dest_page,
+ unsigned long start_byte,
+ size_t srclen, size_t destlen)
{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
int ret = 0;
int wbits = MAX_WBITS;
- struct workspace *workspace;
unsigned long bytes_left = destlen;
unsigned long total_out = 0;
char *kaddr;
- if (destlen > PAGE_CACHE_SIZE)
- return -ENOMEM;
-
- workspace = find_zlib_workspace();
- if (IS_ERR(workspace))
- return -ENOMEM;
-
workspace->inf_strm.next_in = data_in;
workspace->inf_strm.avail_in = srclen;
workspace->inf_strm.total_in = 0;
@@ -568,8 +415,7 @@ int btrfs_zlib_decompress(unsigned char *data_in,
if (Z_OK != zlib_inflateInit2(&workspace->inf_strm, wbits)) {
printk(KERN_WARNING "inflateInit failed\n");
- ret = -1;
- goto out;
+ return -1;
}
while (bytes_left > 0) {
@@ -619,12 +465,13 @@ next:
ret = 0;
zlib_inflateEnd(&workspace->inf_strm);
-out:
- free_workspace(workspace);
return ret;
}
-void btrfs_zlib_exit(void)
-{
- free_workspaces();
-}
+struct btrfs_compress_op btrfs_zlib_compress = {
+ .alloc_workspace = zlib_alloc_workspace,
+ .free_workspace = zlib_free_workspace,
+ .compress_pages = zlib_compress_pages,
+ .decompress_biovec = zlib_decompress_biovec,
+ .decompress = zlib_decompress,
+};
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Lzo is a much faster compression algorithm than gzib, so would allow
more users to enable transparent compression, and some users can
choose from compression ratio and speed for different applications
Usage:
# mount -t btrfs -o compress[=<zlib,lzo>] dev /mnt
or
# mount -t btrfs -o compress-force[=<zlib,lzo>] dev /mnt
"-o compress" without argument is still allowed for compatability.
Performance:
The test copied a linux source tarball (~400M) from an ext4 partition
to the btrfs partition, and then extracted it.
(time in second)
lzo zlib nocompress
copy: 10.6 21.7 14.9
extract: 70.1 94.4 66.6
(data size in MB)
lzo zlib nocompress
copy: 185.87 108.69 394.49
extract: 193.80 132.36 381.21
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
---
fs/btrfs/Makefile | 2 +-
fs/btrfs/compression.c | 1 +
fs/btrfs/compression.h | 1 +
fs/btrfs/ctree.h | 5 +-
fs/btrfs/lzo.c | 498 ++++++++++++++++++++++++++++++++++++++++++++++++
fs/btrfs/super.c | 6 +
6 files changed, 510 insertions(+), 3 deletions(-)
create mode 100644 fs/btrfs/lzo.c
diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index a35eb36..31610ea 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -6,5 +6,5 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o
root-tree.o dir-item.o \
transaction.o inode.o file.o tree-defrag.o \
extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
- export.o tree-log.o acl.o free-space-cache.o zlib.o \
+ export.o tree-log.o acl.o free-space-cache.o zlib.o lzo.o \
compression.o delayed-ref.o relocation.o
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 4c6068b..84c5490 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -714,6 +714,7 @@ static wait_queue_head_t
comp_workspace_wait[BTRFS_COMPRESS_TYPES];
struct btrfs_compress_op *btrfs_compress_op[] = {
&btrfs_zlib_compress,
+ &btrfs_lzo_compress,
};
int __init btrfs_init_compress(void)
diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
index 9b5f2f3..f7ce217 100644
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -73,5 +73,6 @@ struct btrfs_compress_op {
};
extern struct btrfs_compress_op btrfs_zlib_compress;
+extern struct btrfs_compress_op btrfs_lzo_compress;
#endif
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index b0f8b4d..f9c2b00 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -530,8 +530,9 @@ struct btrfs_timespec {
enum btrfs_compression_type {
BTRFS_COMPRESS_NONE = 0,
BTRFS_COMPRESS_ZLIB = 1,
- BTRFS_COMPRESS_TYPES = 1,
- BTRFS_COMPRESS_LAST = 2,
+ BTRFS_COMPRESS_LZO = 2,
+ BTRFS_COMPRESS_TYPES = 2,
+ BTRFS_COMPRESS_LAST = 3,
};
struct btrfs_inode_item {
diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
new file mode 100644
index 0000000..0a518f3
--- /dev/null
+++ b/fs/btrfs/lzo.c
@@ -0,0 +1,498 @@
+/*
+ * Copyright (C) 2008 Oracle. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/bio.h>
+#include <linux/lzo.h>
+#include "compression.h"
+
+#define LZO_LEN 4
+
+struct workspace {
+ void *mem;
+ void *buf; /* where compressed data goes */
+ void *cbuf; /* where decompressed data goes */
+ struct list_head list;
+};
+
+static void lzo_free_workspace(struct list_head *ws)
+{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
+
+ vfree(workspace->buf);
+ vfree(workspace->cbuf);
+ vfree(workspace->mem);
+ kfree(workspace);
+}
+
+static struct list_head *lzo_alloc_workspace(void)
+{
+ struct workspace *workspace;
+
+ workspace = kzalloc(sizeof(*workspace), GFP_NOFS);
+ if (!workspace)
+ return ERR_PTR(-ENOMEM);
+
+ workspace->mem = vmalloc(LZO1X_MEM_COMPRESS);
+ workspace->buf = vmalloc(lzo1x_worst_compress(PAGE_CACHE_SIZE));
+ workspace->cbuf = vmalloc(lzo1x_worst_compress(PAGE_CACHE_SIZE));
+ if (!workspace->mem || !workspace->buf || !workspace->cbuf)
+ goto fail;
+
+ INIT_LIST_HEAD(&workspace->list);
+
+ return &workspace->list;
+fail:
+ lzo_free_workspace(&workspace->list);
+ return ERR_PTR(-ENOMEM);
+}
+
+static inline void write_compress_length(char *buf, size_t len)
+{
+ __le32 dlen;
+
+ dlen = cpu_to_le32(len);
+ memcpy(buf, &dlen, LZO_LEN);
+}
+
+static inline size_t read_compress_length(char *buf)
+{
+ __le32 dlen;
+
+ memcpy(&dlen, buf, LZO_LEN);
+ return le32_to_cpu(dlen);
+}
+
+static int lzo_compress_pages(struct list_head *ws,
+ struct address_space *mapping,
+ u64 start, unsigned long len,
+ struct page **pages,
+ unsigned long nr_dest_pages,
+ unsigned long *out_pages,
+ unsigned long *total_in,
+ unsigned long *total_out,
+ unsigned long max_out)
+{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
+ int ret = -1;
+ char *data_in;
+ char *cpage_out;
+ int nr_pages = 0;
+ struct page *in_page = NULL;
+ struct page *out_page = NULL;
+ unsigned long bytes_left;
+
+ size_t in_len;
+ size_t out_len;
+ char *buf;
+ unsigned long tot_in = 0;
+ unsigned long tot_out = 0;
+ unsigned long pg_bytes_left;
+ unsigned long out_offset;
+ unsigned long bytes;
+
+ *out_pages = 0;
+ *total_out = 0;
+ *total_in = 0;
+
+ in_page = find_get_page(mapping, start >> PAGE_CACHE_SHIFT);
+ data_in = kmap(in_page);
+
+ /*
+ * store the size of all chunks of compressed data in
+ * the first 4 bytes
+ */
+ out_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
+ cpage_out = kmap(out_page);
+ out_offset = LZO_LEN;
+ tot_out = LZO_LEN;
+ pages[0] = out_page;
+ nr_pages = 1;
+ pg_bytes_left = PAGE_CACHE_SIZE - LZO_LEN;
+
+ /* compress at most one page of data each time */
+ in_len = min(len, PAGE_CACHE_SIZE);
+ while (tot_in < len) {
+ ret = lzo1x_1_compress(data_in, in_len, workspace->cbuf,
+ &out_len, workspace->mem);
+ if (ret != LZO_E_OK) {
+ printk(KERN_DEBUG "btrfs deflate in loop returned %d\n",
+ ret);
+ goto out;
+ }
+
+ /* store the size of this chunk of compressed data */
+ write_compress_length(cpage_out + out_offset, out_len);
+ tot_out += LZO_LEN;
+ out_offset += LZO_LEN;
+ pg_bytes_left -= LZO_LEN;
+
+ tot_in += in_len;
+ tot_out += out_len;
+
+ /* copy bytes from the working buffer into the pages */
+ buf = workspace->cbuf;
+ while (out_len) {
+ bytes = min_t(unsigned long, pg_bytes_left, out_len);
+
+ memcpy(cpage_out + out_offset, buf, bytes);
+
+ out_len -= bytes;
+ pg_bytes_left -= bytes;
+ buf += bytes;
+ out_offset += bytes;
+
+ /*
+ * we need another page for writing out.
+ *
+ * Note if there''s less than 4 bytes left, we just
+ * skip to a new page.
+ */
+ if ((out_len == 0 && pg_bytes_left < LZO_LEN) ||
+ pg_bytes_left == 0) {
+ if (pg_bytes_left) {
+ memset(cpage_out + out_offset, 0,
+ pg_bytes_left);
+ tot_out += pg_bytes_left;
+ }
+
+ /* we''re done, don''t allocate new page */
+ if (out_len == 0 && tot_in >= len) break;
+
+ kunmap(out_page);
+ if (nr_pages == nr_dest_pages) {
+ out_page = NULL;
+ goto out;
+ }
+
+ out_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
+ cpage_out = kmap(out_page);
+ pages[nr_pages++] = out_page;
+
+ pg_bytes_left = PAGE_CACHE_SIZE;
+ out_offset = 0;
+ }
+ }
+
+ /* we''re making it bigger, give up */
+ if (tot_in > 8192 && tot_in < tot_out)
+ goto out;
+
+ /* we''re all done */
+ if (tot_in >= len)
+ break;
+
+ if (tot_out > max_out)
+ break;
+
+ bytes_left = len - tot_in;
+ kunmap(in_page);
+ page_cache_release(in_page);
+
+ start += PAGE_CACHE_SIZE;
+ in_page = find_get_page(mapping, start >> PAGE_CACHE_SHIFT);
+ data_in = kmap(in_page);
+ in_len = min(bytes_left, PAGE_CACHE_SIZE);
+ }
+
+ if (tot_out > tot_in)
+ goto out;
+
+ /* store the size of all chunks of compressed data */
+ cpage_out = kmap(pages[0]);
+ write_compress_length(cpage_out, tot_out);
+
+ kunmap(pages[0]);
+
+ ret = 0;
+ *total_out = tot_out;
+ *total_in = tot_in;
+out:
+ *out_pages = nr_pages;
+ if (out_page)
+ kunmap(out_page);
+
+ if (in_page) {
+ kunmap(in_page);
+ page_cache_release(in_page);
+ }
+
+ return ret;
+}
+
+static int lzo_decompress_biovec(struct list_head *ws,
+ struct page **pages_in,
+ u64 disk_start,
+ struct bio_vec *bvec,
+ int vcnt,
+ size_t srclen)
+{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
+ int ret = 0;
+ char *data_in;
+ unsigned long page_bytes_left;
+ unsigned long page_in_index = 0;
+ unsigned long page_out_index = 0;
+ struct page *page_out;
+ unsigned long total_pages_in = (srclen + PAGE_CACHE_SIZE - 1) /
+ PAGE_CACHE_SIZE;
+ unsigned long buf_start;
+ unsigned long buf_offset = 0;
+ unsigned long bytes;
+ unsigned long working_bytes;
+ unsigned long pg_offset;
+ unsigned long start_byte;
+ unsigned long current_buf_start;
+ char *kaddr;
+
+ size_t in_len;
+ size_t out_len;
+ unsigned long in_offset;
+ unsigned long in_page_bytes_left;
+ unsigned long tot_in;
+ unsigned long tot_out;
+ unsigned long tot_len;
+ char *buf;
+
+ data_in = kmap(pages_in[0]);
+ tot_len = read_compress_length(data_in);
+
+ tot_in = LZO_LEN;
+ in_offset = LZO_LEN;
+ tot_len = min_t(size_t, srclen, tot_len);
+ in_page_bytes_left = PAGE_CACHE_SIZE - LZO_LEN;
+
+ tot_out = 0;
+ page_out = bvec[0].bv_page;
+ page_bytes_left = PAGE_CACHE_SIZE;
+ pg_offset = 0;
+
+ while (tot_in < tot_len) {
+ in_len = read_compress_length(data_in + in_offset);
+ in_page_bytes_left -= LZO_LEN;
+ in_offset += LZO_LEN;
+ tot_in += LZO_LEN;
+
+ tot_in += in_len;
+ working_bytes = in_len;
+
+ /* fast path: avoid using the working buffer */
+ if (in_page_bytes_left >= in_len) {
+ buf = data_in + in_offset;
+ bytes = in_len;
+ goto cont;
+ }
+
+ /* copy bytes from the pages into the working buffer */
+ buf = workspace->cbuf;
+ buf_offset = 0;
+ while (working_bytes) {
+ bytes = min(working_bytes, in_page_bytes_left);
+
+ memcpy(buf + buf_offset, data_in + in_offset, bytes);
+ buf_offset += bytes;
+cont:
+ working_bytes -= bytes;
+ in_page_bytes_left -= bytes;
+ in_offset += bytes;
+
+ /* check if we need to pick another page */
+ if ((working_bytes == 0 && in_page_bytes_left < LZO_LEN)
+ || in_page_bytes_left == 0) {
+ tot_in += in_page_bytes_left;
+
+ if (working_bytes == 0 && tot_in >= tot_len)
+ break;
+
+ kunmap(pages_in[page_in_index]);
+ page_in_index++;
+ if (page_in_index >= total_pages_in) {
+ ret = -1;
+ data_in = NULL;
+ goto done;
+ }
+ data_in = kmap(pages_in[page_in_index]);
+
+ in_page_bytes_left = PAGE_CACHE_SIZE;
+ in_offset = 0;
+ }
+ }
+
+ out_len = lzo1x_worst_compress(PAGE_CACHE_SIZE);
+ ret = lzo1x_decompress_safe(buf, in_len, workspace->buf,
+ &out_len);
+ if (ret != LZO_E_OK) {
+ printk(KERN_WARNING "btrfs decompress failed\n");
+ ret = -1;
+ break;
+ }
+
+ /*
+ * buf start is the byte offset we''re of the start of
+ * our workspace buffer
+ */
+ buf_start = tot_out;
+
+ /* tot_out is the last byte of the workspace buffer */
+ tot_out += out_len;
+
+ working_bytes = tot_out - buf_start;
+
+ /*
+ * start_byte is the first byte of the page we''re currently
+ * copying into relative to the start of the compressed data.
+ */
+ start_byte = page_offset(page_out) - disk_start;
+
+ if (working_bytes == 0) {
+ /* we didn''t make progress in this inflate
+ * call, we''re done
+ */
+ break;
+ }
+
+ /* we haven''t yet hit data corresponding to this page */
+ if (tot_out <= start_byte)
+ continue;
+
+ /*
+ * the start of the data we care about is offset into
+ * the middle of our working buffer
+ */
+ if (tot_out > start_byte && buf_start < start_byte) {
+ buf_offset = start_byte - buf_start;
+ working_bytes -= buf_offset;
+ } else {
+ buf_offset = 0;
+ }
+ current_buf_start = buf_start;
+
+ /* copy bytes from the working buffer into the pages */
+ while (working_bytes > 0) {
+ bytes = min(PAGE_CACHE_SIZE - pg_offset,
+ PAGE_CACHE_SIZE - buf_offset);
+ bytes = min(bytes, working_bytes);
+ kaddr = kmap_atomic(page_out, KM_USER0);
+ memcpy(kaddr + pg_offset, workspace->buf + buf_offset,
+ bytes);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page_out);
+
+ pg_offset += bytes;
+ page_bytes_left -= bytes;
+ buf_offset += bytes;
+ working_bytes -= bytes;
+ current_buf_start += bytes;
+
+ /* check if we need to pick another page */
+ if (page_bytes_left == 0) {
+ page_out_index++;
+ if (page_out_index >= vcnt) {
+ ret = 0;
+ goto done;
+ }
+
+ page_out = bvec[page_out_index].bv_page;
+ pg_offset = 0;
+ page_bytes_left = PAGE_CACHE_SIZE;
+ start_byte = page_offset(page_out) - disk_start;
+
+ /*
+ * make sure our new page is covered by this
+ * working buffer
+ */
+ if (tot_out <= start_byte)
+ break;
+
+ /* the next page in the biovec might not
+ * be adjacent to the last page, but it
+ * might still be found inside this working
+ * buffer. bump our offset pointer
+ */
+ if (tot_out > start_byte &&
+ current_buf_start < start_byte) {
+ buf_offset = start_byte - buf_start;
+ working_bytes = tot_out - start_byte;
+ current_buf_start = buf_start +
+ buf_offset;
+ }
+ }
+ }
+ }
+done:
+ if (data_in)
+ kunmap(pages_in[page_in_index]);
+ return ret;
+}
+
+static int lzo_decompress(struct list_head *ws, unsigned char *data_in,
+ struct page *dest_page,
+ unsigned long start_byte,
+ size_t srclen, size_t destlen)
+{
+ struct workspace *workspace = list_entry(ws, struct workspace, list);
+ size_t in_len;
+ size_t out_len;
+ size_t tot_len;
+ int ret = 0;
+ char *kaddr;
+ unsigned long bytes;
+
+ BUG_ON(srclen < LZO_LEN);
+
+ tot_len = read_compress_length(data_in);
+ data_in += LZO_LEN;
+
+ in_len = read_compress_length(data_in);
+ data_in += LZO_LEN;
+
+ out_len = PAGE_CACHE_SIZE;
+ ret = lzo1x_decompress_safe(data_in, in_len, workspace->buf, &out_len);
+ if (ret != LZO_E_OK) {
+ printk("btrfs decompress failed!\n");
+ ret = -1;
+ goto out;
+ }
+
+ if (out_len < start_byte) {
+ ret = -1;
+ goto out;
+ }
+
+ bytes = min_t(unsigned long, destlen, out_len - start_byte);
+
+ kaddr = kmap_atomic(dest_page, KM_USER0);
+ memcpy(kaddr, workspace->buf + start_byte, bytes);
+ kunmap_atomic(kaddr, KM_USER0);
+out:
+ return ret;
+}
+
+struct btrfs_compress_op btrfs_lzo_compress = {
+ .alloc_workspace = lzo_alloc_workspace,
+ .free_workspace = lzo_free_workspace,
+ .compress_pages = lzo_compress_pages,
+ .decompress_biovec = lzo_decompress_biovec,
+ .decompress = lzo_decompress,
+};
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index a2e5c79..5670f30 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -159,6 +159,9 @@ int btrfs_parse_options(struct btrfs_root *root, char
*options)
strcmp(args[0].from, "zlib") == 0) {
compress_type = "zlib";
info->compress_type = BTRFS_COMPRESS_ZLIB;
+ } else if (strcmp(args[0].from, "lzo") == 0) {
+ compress_type = "lzo";
+ info->compress_type = BTRFS_COMPRESS_LZO;
} else {
ret = -EINVAL;
goto out;
@@ -173,6 +176,9 @@ int btrfs_parse_options(struct btrfs_root *root, char
*options)
strcmp(args[0].from, "zlib") == 0) {
compress_type = "zlib";
info->compress_type = BTRFS_COMPRESS_ZLIB;
+ } else if (strcmp(args[0].from, "lzo") == 0) {
+ compress_type = "lzo";
+ info->compress_type = BTRFS_COMPRESS_LZO;
} else {
ret = -EINVAL;
goto out;
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Li Zefan
2010-Oct-25 07:12 UTC
[PATCH 4/5] btrfs: Allow to specify compress method when defrag
Update defrag ioctl, so one can choose lzo or zlib when turning
on compression in defrag operation.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
---
fs/btrfs/ioctl.c | 6 +++++-
fs/btrfs/ioctl.h | 9 ++++++++-
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index ecc49ee..2ea05df 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -584,8 +584,12 @@ static int btrfs_defrag_file(struct file *file,
}
total_read++;
mutex_lock(&inode->i_mutex);
- if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)
+ if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS) {
BTRFS_I(inode)->force_compress = BTRFS_COMPRESS_ZLIB;
+ if (range->compress_type)
+ BTRFS_I(inode)->force_compress + range->compress_type;
+ }
ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
if (ret)
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 424694a..776a2b4 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -122,8 +122,15 @@ struct btrfs_ioctl_defrag_range_args {
*/
__u32 extent_thresh;
+ /*
+ * which compression method to use if turning on compression
+ * for this defrag operation. If unspecified, zlib will
+ * be used
+ */
+ __u32 compress_type;
+
/* spare for later */
- __u32 unused[5];
+ __u32 unused[4];
};
struct btrfs_ioctl_space_info {
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Add a common function to copy decompressed data from working buffer
to bio pages.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
---
fs/btrfs/compression.c | 92 +++++++++++++++++++++++++++++++++++++++
fs/btrfs/compression.h | 5 ++
fs/btrfs/lzo.c | 101 +++-----------------------------------------
fs/btrfs/zlib.c | 111 +++++------------------------------------------
4 files changed, 115 insertions(+), 194 deletions(-)
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 84c5490..c7f695b 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -927,3 +927,95 @@ void __exit btrfs_exit_compress(void)
{
free_workspaces();
}
+
+/*
+ * Copy uncompressed data from working buffer to pages.
+ *
+ * buf_start is the byte offset we''re of the start of our workspace
buffer.
+ *
+ * total_out is the last byte of the buffer
+ */
+int btrfs_decompress_buf2page(char *buf, unsigned long buf_start,
+ unsigned long total_out, u64 disk_start,
+ struct bio_vec *bvec, int vcnt,
+ unsigned long *page_index,
+ unsigned long *pg_offset)
+{
+ unsigned long buf_offset;
+ unsigned long current_buf_start;
+ unsigned long start_byte;
+ unsigned long working_bytes = total_out - buf_start;
+ unsigned long bytes;
+ char *kaddr;
+ struct page *page_out = bvec[*page_index].bv_page;
+
+ /*
+ * start byte is the first byte of the page we''re currently
+ * copying into relative to the start of the compressed data.
+ */
+ start_byte = page_offset(page_out) - disk_start;
+
+ /* we haven''t yet hit data corresponding to this page */
+ if (total_out <= start_byte)
+ return 1;
+
+ /*
+ * the start of the data we care about is offset into
+ * the middle of our working buffer
+ */
+ if (total_out > start_byte && buf_start < start_byte) {
+ buf_offset = start_byte - buf_start;
+ working_bytes -= buf_offset;
+ } else {
+ buf_offset = 0;
+ }
+ current_buf_start = buf_start;
+
+ /* copy bytes from the working buffer into the pages */
+ while (working_bytes > 0) {
+ bytes = min(PAGE_CACHE_SIZE - *pg_offset,
+ PAGE_CACHE_SIZE - buf_offset);
+ bytes = min(bytes, working_bytes);
+ kaddr = kmap_atomic(page_out, KM_USER0);
+ memcpy(kaddr + *pg_offset, buf + buf_offset, bytes);
+ kunmap_atomic(kaddr, KM_USER0);
+ flush_dcache_page(page_out);
+
+ *pg_offset += bytes;
+ buf_offset += bytes;
+ working_bytes -= bytes;
+ current_buf_start += bytes;
+
+ /* check if we need to pick another page */
+ if (*pg_offset == PAGE_CACHE_SIZE) {
+ (*page_index)++;
+ if (*page_index >= vcnt)
+ return 0;
+
+ page_out = bvec[*page_index].bv_page;
+ *pg_offset = 0;
+ start_byte = page_offset(page_out) - disk_start;
+
+ /*
+ * make sure our new page is covered by this
+ * working buffer
+ */
+ if (total_out <= start_byte)
+ return 1;
+
+ /*
+ * the next page in the biovec might not be adjacent
+ * to the last page, but it might still be found
+ * inside this working buffer. bump our offset pointer
+ */
+ if (total_out > start_byte &&
+ current_buf_start < start_byte) {
+ buf_offset = start_byte - buf_start;
+ working_bytes = total_out - start_byte;
+ current_buf_start = buf_start + buf_offset;
+ }
+ }
+ }
+
+ return 1;
+}
diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h
index f7ce217..5100017 100644
--- a/fs/btrfs/compression.h
+++ b/fs/btrfs/compression.h
@@ -34,6 +34,11 @@ int btrfs_decompress_biovec(int type, struct page **pages_in,
u64 disk_start,
struct bio_vec *bvec, int vcnt, size_t srclen);
int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page,
unsigned long start_byte, size_t srclen, size_t destlen);
+int btrfs_decompress_buf2page(char *buf, unsigned long buf_start,
+ unsigned long total_out, u64 disk_start,
+ struct bio_vec *bvec, int vcnt,
+ unsigned long *page_index,
+ unsigned long *pg_offset);
int btrfs_submit_compressed_write(struct inode *inode, u64 start,
unsigned long len, u64 disk_start,
diff --git a/fs/btrfs/lzo.c b/fs/btrfs/lzo.c
index 0a518f3..3d91e28 100644
--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -249,12 +249,10 @@ static int lzo_decompress_biovec(struct list_head *ws,
size_t srclen)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
- int ret = 0;
+ int ret = 0, ret2;
char *data_in;
- unsigned long page_bytes_left;
unsigned long page_in_index = 0;
unsigned long page_out_index = 0;
- struct page *page_out;
unsigned long total_pages_in = (srclen + PAGE_CACHE_SIZE - 1) /
PAGE_CACHE_SIZE;
unsigned long buf_start;
@@ -262,9 +260,6 @@ static int lzo_decompress_biovec(struct list_head *ws,
unsigned long bytes;
unsigned long working_bytes;
unsigned long pg_offset;
- unsigned long start_byte;
- unsigned long current_buf_start;
- char *kaddr;
size_t in_len;
size_t out_len;
@@ -284,8 +279,6 @@ static int lzo_decompress_biovec(struct list_head *ws,
in_page_bytes_left = PAGE_CACHE_SIZE - LZO_LEN;
tot_out = 0;
- page_out = bvec[0].bv_page;
- page_bytes_left = PAGE_CACHE_SIZE;
pg_offset = 0;
while (tot_in < tot_len) {
@@ -348,97 +341,15 @@ cont:
break;
}
- /*
- * buf start is the byte offset we''re of the start of
- * our workspace buffer
- */
buf_start = tot_out;
-
- /* tot_out is the last byte of the workspace buffer */
tot_out += out_len;
- working_bytes = tot_out - buf_start;
-
- /*
- * start_byte is the first byte of the page we''re currently
- * copying into relative to the start of the compressed data.
- */
- start_byte = page_offset(page_out) - disk_start;
-
- if (working_bytes == 0) {
- /* we didn''t make progress in this inflate
- * call, we''re done
- */
+ ret2 = btrfs_decompress_buf2page(workspace->buf, buf_start,
+ tot_out, disk_start,
+ bvec, vcnt,
+ &page_out_index, &pg_offset);
+ if (ret2 == 0)
break;
- }
-
- /* we haven''t yet hit data corresponding to this page */
- if (tot_out <= start_byte)
- continue;
-
- /*
- * the start of the data we care about is offset into
- * the middle of our working buffer
- */
- if (tot_out > start_byte && buf_start < start_byte) {
- buf_offset = start_byte - buf_start;
- working_bytes -= buf_offset;
- } else {
- buf_offset = 0;
- }
- current_buf_start = buf_start;
-
- /* copy bytes from the working buffer into the pages */
- while (working_bytes > 0) {
- bytes = min(PAGE_CACHE_SIZE - pg_offset,
- PAGE_CACHE_SIZE - buf_offset);
- bytes = min(bytes, working_bytes);
- kaddr = kmap_atomic(page_out, KM_USER0);
- memcpy(kaddr + pg_offset, workspace->buf + buf_offset,
- bytes);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page_out);
-
- pg_offset += bytes;
- page_bytes_left -= bytes;
- buf_offset += bytes;
- working_bytes -= bytes;
- current_buf_start += bytes;
-
- /* check if we need to pick another page */
- if (page_bytes_left == 0) {
- page_out_index++;
- if (page_out_index >= vcnt) {
- ret = 0;
- goto done;
- }
-
- page_out = bvec[page_out_index].bv_page;
- pg_offset = 0;
- page_bytes_left = PAGE_CACHE_SIZE;
- start_byte = page_offset(page_out) - disk_start;
-
- /*
- * make sure our new page is covered by this
- * working buffer
- */
- if (tot_out <= start_byte)
- break;
-
- /* the next page in the biovec might not
- * be adjacent to the last page, but it
- * might still be found inside this working
- * buffer. bump our offset pointer
- */
- if (tot_out > start_byte &&
- current_buf_start < start_byte) {
- buf_offset = start_byte - buf_start;
- working_bytes = tot_out - start_byte;
- current_buf_start = buf_start +
- buf_offset;
- }
- }
- }
}
done:
if (data_in)
diff --git a/fs/btrfs/zlib.c b/fs/btrfs/zlib.c
index 3d8c501..4053472 100644
--- a/fs/btrfs/zlib.c
+++ b/fs/btrfs/zlib.c
@@ -210,24 +210,16 @@ static int zlib_decompress_biovec(struct list_head *ws,
struct page **pages_in,
size_t srclen)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
- int ret = 0;
+ int ret = 0, ret2;
int wbits = MAX_WBITS;
char *data_in;
size_t total_out = 0;
- unsigned long page_bytes_left;
unsigned long page_in_index = 0;
unsigned long page_out_index = 0;
- struct page *page_out;
unsigned long total_pages_in = (srclen + PAGE_CACHE_SIZE - 1) /
PAGE_CACHE_SIZE;
unsigned long buf_start;
- unsigned long buf_offset;
- unsigned long bytes;
- unsigned long working_bytes;
unsigned long pg_offset;
- unsigned long start_byte;
- unsigned long current_buf_start;
- char *kaddr;
data_in = kmap(pages_in[page_in_index]);
workspace->inf_strm.next_in = data_in;
@@ -237,8 +229,6 @@ static int zlib_decompress_biovec(struct list_head *ws,
struct page **pages_in,
workspace->inf_strm.total_out = 0;
workspace->inf_strm.next_out = workspace->buf;
workspace->inf_strm.avail_out = PAGE_CACHE_SIZE;
- page_out = bvec[page_out_index].bv_page;
- page_bytes_left = PAGE_CACHE_SIZE;
pg_offset = 0;
/* If it''s deflate, and it''s got no preset dictionary, then
@@ -260,100 +250,23 @@ static int zlib_decompress_biovec(struct list_head *ws,
struct page **pages_in,
ret = zlib_inflate(&workspace->inf_strm, Z_NO_FLUSH);
if (ret != Z_OK && ret != Z_STREAM_END)
break;
- /*
- * buf start is the byte offset we''re of the start of
- * our workspace buffer
- */
- buf_start = total_out;
- /* total_out is the last byte of the workspace buffer */
+ buf_start = total_out;
total_out = workspace->inf_strm.total_out;
- working_bytes = total_out - buf_start;
-
- /*
- * start byte is the first byte of the page we''re currently
- * copying into relative to the start of the compressed data.
- */
- start_byte = page_offset(page_out) - disk_start;
-
- if (working_bytes == 0) {
- /* we didn''t make progress in this inflate
- * call, we''re done
- */
- if (ret != Z_STREAM_END)
- ret = -1;
+ /* we didn''t make progress in this inflate call, we''re done
*/
+ if (buf_start == total_out)
break;
- }
- /* we haven''t yet hit data corresponding to this page */
- if (total_out <= start_byte)
- goto next;
-
- /*
- * the start of the data we care about is offset into
- * the middle of our working buffer
- */
- if (total_out > start_byte && buf_start < start_byte) {
- buf_offset = start_byte - buf_start;
- working_bytes -= buf_offset;
- } else {
- buf_offset = 0;
- }
- current_buf_start = buf_start;
-
- /* copy bytes from the working buffer into the pages */
- while (working_bytes > 0) {
- bytes = min(PAGE_CACHE_SIZE - pg_offset,
- PAGE_CACHE_SIZE - buf_offset);
- bytes = min(bytes, working_bytes);
- kaddr = kmap_atomic(page_out, KM_USER0);
- memcpy(kaddr + pg_offset, workspace->buf + buf_offset,
- bytes);
- kunmap_atomic(kaddr, KM_USER0);
- flush_dcache_page(page_out);
-
- pg_offset += bytes;
- page_bytes_left -= bytes;
- buf_offset += bytes;
- working_bytes -= bytes;
- current_buf_start += bytes;
-
- /* check if we need to pick another page */
- if (page_bytes_left == 0) {
- page_out_index++;
- if (page_out_index >= vcnt) {
- ret = 0;
- goto done;
- }
-
- page_out = bvec[page_out_index].bv_page;
- pg_offset = 0;
- page_bytes_left = PAGE_CACHE_SIZE;
- start_byte = page_offset(page_out) - disk_start;
-
- /*
- * make sure our new page is covered by this
- * working buffer
- */
- if (total_out <= start_byte)
- goto next;
-
- /* the next page in the biovec might not
- * be adjacent to the last page, but it
- * might still be found inside this working
- * buffer. bump our offset pointer
- */
- if (total_out > start_byte &&
- current_buf_start < start_byte) {
- buf_offset = start_byte - buf_start;
- working_bytes = total_out - start_byte;
- current_buf_start = buf_start +
- buf_offset;
- }
- }
+ ret2 = btrfs_decompress_buf2page(workspace->buf, buf_start,
+ total_out, disk_start,
+ bvec, vcnt,
+ &page_out_index, &pg_offset);
+ if (ret2 == 0) {
+ ret = 0;
+ goto done;
}
-next:
+
workspace->inf_strm.next_out = workspace->buf;
workspace->inf_strm.avail_out = PAGE_CACHE_SIZE;
--
1.7.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 25, 2010 at 03:11:22PM +0800, Li Zefan wrote:> Lzo is a much faster compression algorithm than gzib, so would allow > more users to enable transparent compression, and some users can > choose from compression ratio and compression speed.This is also much smaller than I expected, really nice. It looks like older kernels won''t properly deal (nicely give EIO) with lzo compressed files? We can add compatbits to deal with that if it is the case. -chris -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Chris Mason wrote:> On Mon, Oct 25, 2010 at 03:11:22PM +0800, Li Zefan wrote: >> Lzo is a much faster compression algorithm than gzib, so would allow >> more users to enable transparent compression, and some users can >> choose from compression ratio and compression speed. > > This is also much smaller than I expected, really nice. It looks like > older kernels won''t properly deal (nicely give EIO) with lzo compressed > files? > > We can add compatbits to deal with that if it is the case. >I forgot compatibility issue with older kernels.. Though I didn''t test older kernels, I don''t think they can deal with lzo compressed files properly, at least not for inlined extents, in which case I think btrfs will just show compressed data to the users. So yes, an incompat flag is needed. -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 25, 2010 at 9:34 PM, Li Zefan <lizf@cn.fujitsu.com> wrote:> Chris Mason wrote: >> On Mon, Oct 25, 2010 at 03:11:22PM +0800, Li Zefan wrote: >>> Lzo is a much faster compression algorithm than gzib, so would allow >>> more users to enable transparent compression, and some users can >>> choose from compression ratio and compression speed. >> >> This is also much smaller than I expected, really nice. It looks like >> older kernels won''t properly deal (nicely give EIO) with lzo compressed >> files? >> >> We can add compatbits to deal with that if it is the case. >> > > I forgot compatibility issue with older kernels.. > > Though I didn''t test older kernels, I don''t think they can deal with lzo > compressed files properly, at least not for inlined extents, in which > case I think btrfs will just show compressed data to the users. > > So yes, an incompat flag is needed.I''ve been testing this set of patches on a 2.6.36 kernel with the latest btrfs-unstable patches, and I wanted to provide my positive feedback. The lzo compression patches worked as expected, and I did not encounter any stability problems in my testing (which mainly consisted of decompressing a root partition archive and doing some compiling chores in a chroot environment on that drive). I did some crude benchmarking on decompressing an archived root partition to an empty btrfs drive, and my results were similar to the results posted by Li Zefan in the original post. The lzo compression did not compress quite as well as zlib, but was much faster. I did some test mounting of a lzo-compressed partition with an older non-lzo-patched kernel, and as expected, the contents of the files were garbled. But I did not encounter kernel oops or other issues when trying to read the garbled files. I also wanted to confirm that my other zlib-compressed partitions did not encounter any issues when bouncing back and forth between a lzo-patched kernel and older kernels. As expected, I did not see any issues in the partitions that had only been mounted with zlib compression. You''ll want an incompat flag as indicated in previous posts, but I look forward to seeing lzo compression in the future. -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Mitch Harder wrote:> On Mon, Oct 25, 2010 at 9:34 PM, Li Zefan <lizf@cn.fujitsu.com> wrote: >> Chris Mason wrote: >>> On Mon, Oct 25, 2010 at 03:11:22PM +0800, Li Zefan wrote: >>>> Lzo is a much faster compression algorithm than gzib, so would allow >>>> more users to enable transparent compression, and some users can >>>> choose from compression ratio and compression speed. >>> This is also much smaller than I expected, really nice. It looks like >>> older kernels won''t properly deal (nicely give EIO) with lzo compressed >>> files? >>> >>> We can add compatbits to deal with that if it is the case. >>> >> I forgot compatibility issue with older kernels.. >> >> Though I didn''t test older kernels, I don''t think they can deal with lzo >> compressed files properly, at least not for inlined extents, in which >> case I think btrfs will just show compressed data to the users. >> >> So yes, an incompat flag is needed. > > I''ve been testing this set of patches on a 2.6.36 kernel with the > latest btrfs-unstable patches, and I wanted to provide my positive > feedback. > > The lzo compression patches worked as expected, and I did not > encounter any stability problems in my testing (which mainly consisted > of decompressing a root partition archive and doing some compiling > chores in a chroot environment on that drive). > > I did some crude benchmarking on decompressing an archived root > partition to an empty btrfs drive, and my results were similar to the > results posted by Li Zefan in the original post. The lzo compression > did not compress quite as well as zlib, but was much faster. > > I did some test mounting of a lzo-compressed partition with an older > non-lzo-patched kernel, and as expected, the contents of the files > were garbled. But I did not encounter kernel oops or other issues > when trying to read the garbled files. > > I also wanted to confirm that my other zlib-compressed partitions did > not encounter any issues when bouncing back and forth between a > lzo-patched kernel and older kernels. As expected, I did not see any > issues in the partitions that had only been mounted with zlib > compression. > > You''ll want an incompat flag as indicated in previous posts, but I > look forward to seeing lzo compression in the future. >Thanks for testing! I had been occupied by other things, so have been silent on this. Actually I''ve added the incompat flag, but haven''t done userspace programs. I''m setting up a git tree, and will send out a pull request to Chris this week. (probabaly) And I think I can add your Tested-by in the whole patchset? Except for the ioctl change, which I guess you didn''t test. We really need more review and test for btrfs patches, so what you''ve done is really appreciatated. :) -- Li Zefan -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Nov 15, 2010 at 6:57 PM, Li Zefan <lizf@cn.fujitsu.com> wrote:> Mitch Harder wrote: >> On Mon, Oct 25, 2010 at 9:34 PM, Li Zefan <lizf@cn.fujitsu.com> wrote: >>> Chris Mason wrote: >>>> On Mon, Oct 25, 2010 at 03:11:22PM +0800, Li Zefan wrote: >>>>> Lzo is a much faster compression algorithm than gzib, so would allow >>>>> more users to enable transparent compression, and some users can >>>>> choose from compression ratio and compression speed. >>>> This is also much smaller than I expected, really nice. It looks like >>>> older kernels won''t properly deal (nicely give EIO) with lzo compressed >>>> files? >>>> >>>> We can add compatbits to deal with that if it is the case. >>>> >>> I forgot compatibility issue with older kernels.. >>> >>> Though I didn''t test older kernels, I don''t think they can deal with lzo >>> compressed files properly, at least not for inlined extents, in which >>> case I think btrfs will just show compressed data to the users. >>> >>> So yes, an incompat flag is needed. >> >> I''ve been testing this set of patches on a 2.6.36 kernel with the >> latest btrfs-unstable patches, and I wanted to provide my positive >> feedback. >> >> The lzo compression patches worked as expected, and I did not >> encounter any stability problems in my testing (which mainly consisted >> of decompressing a root partition archive and doing some compiling >> chores in a chroot environment on that drive). >> >> I did some crude benchmarking on decompressing an archived root >> partition to an empty btrfs drive, and my results were similar to the >> results posted by Li Zefan in the original post. The lzo compression >> did not compress quite as well as zlib, but was much faster. >> >> I did some test mounting of a lzo-compressed partition with an older >> non-lzo-patched kernel, and as expected, the contents of the files >> were garbled. But I did not encounter kernel oops or other issues >> when trying to read the garbled files. >> >> I also wanted to confirm that my other zlib-compressed partitions did >> not encounter any issues when bouncing back and forth between a >> lzo-patched kernel and older kernels. As expected, I did not see any >> issues in the partitions that had only been mounted with zlib >> compression. >> >> You''ll want an incompat flag as indicated in previous posts, but I >> look forward to seeing lzo compression in the future. >> > > Thanks for testing! > > I had been occupied by other things, so have been silent on this. > Actually I''ve added the incompat flag, but haven''t done userspace > programs. > > I''m setting up a git tree, and will send out a pull request to > Chris this week. (probabaly) > > And I think I can add your Tested-by in the whole patchset? Except > for the ioctl change, which I guess you didn''t test. > > We really need more review and test for btrfs patches, so what > you''ve done is really appreciatated. :) >Glad to help. Feel free to add "Tested-by Mitch Harder <mitch.harder@sabayonlinux.org>" Regarding the "ioctl change", I tested the five patches submitted to the M/L on Oct. 25, 2010. Some minor merging changes were required on patch 2/5 for the enum containing the new lzo options in super.c (due to some other recent modifications to that enum for space_cache option). So if there was an additional "ioctl change", I did not test it. -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html