gpxctawjc5oh at irational.org
2013-Sep-18 13:29 UTC
[asterisk-users] sipgate outgoing calls
Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' -- SIP/sipgate-0000014d is circuit-busy == Everyone is busy/congested at this time (1:0/1/0) here is my sip.conf file [general] port = 5060 bindaddr = 0.0.0.0 context=default qualify=no disallow=all allow=alaw allow=ulaw allow=g729 allow=gsm allow=slinear srvlookup=yes videosupport=yes alwaysauthreject=yes register => SIP-ID:SIP-Password at sipgate.co.uk/SIP-ID [sipgate] type=peer secret=SIP_PASSWORD insecure=invite username=SIP-ID defaultuser=SIP-ID fromuser=SIP-ID context=sipgate_in fromdomain=sipgate.co.uk host=sipgate.co.uk outboundproxy=proxy.live.sipgate.co.uk qualify=yes disallow=all allow=alaw dtmfmode=rfc2833 SIP-ID:SIP-Password obviously, i replace these with my login details but, are these the same thing ? SIP-Password SIP_PASSWORD the sipgate guides are contradictory http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk http://www.live.sipgate.co.uk/faq/article/508/How_do_I_configure_Asteri sk any suggestions ? Many thanks
Le 18/09/2013 15:29, gpxctawjc5oh at irational.org a ?crit :> HelloHi> > i am trying to setup sipgate gateway > > i can get incoming calls fine, but when i dial in and then try to dial > out i get this in asterisk command line > > -- Called 01179248615 at sipgate > [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 > handle_response_invite: Failed to authenticate on INVITE to > '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' > -- SIP/sipgate-0000014d is circuit-busy > == Everyone is busy/congested at this time (1:0/1/0) > > > here is my sip.conf file > > > [general] > port = 5060 > bindaddr = 0.0.0.0 > context=default > qualify=no > disallow=all > allow=alaw > allow=ulaw > allow=g729 > allow=gsm > allow=slinear > srvlookup=yes > videosupport=yes > alwaysauthreject=yes > > register => SIP-ID:SIP-Password at sipgate.co.uk/SIP-ID > > [sipgate] > type=peer > secret=SIP_PASSWORD > insecure=invite > username=SIP-ID > defaultuser=SIP-ID > fromuser=SIP-ID > context=sipgate_in > fromdomain=sipgate.co.uk > host=sipgate.co.uk > outboundproxy=proxy.live.sipgate.co.uk > qualify=yes > disallow=all > allow=alaw > dtmfmode=rfc2833 > > > SIP-ID:SIP-Password > obviously, i replace these with my login details > > but, are these the same thing ? > SIP-Password > SIP_PASSWORD > > the sipgate guides are contradictory > > http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk > http://www.live.sipgate.co.uk/faq/article/508/How_do_I_configure_Asteri > sk > > > any suggestions ? > > Many thanksMy setup with sipgate.de [sipgate] type=peer secret=MY-PASSWORD defaultuser=SIP-ID host=217.10.79.9 fromuser=SIP-ID fromdomain=sipgate.de context=incoming-sipgate ;qualify=900 dtmfmode=info directmedia=yes insecure=port,invite disallow=all allow=ulaw,alaw accountcode=MY-ACCOUNTCODE What you forget is to register with them: ; Sipgate register => SIP-ID:MY-PASSWORD at sipgate.de/SIP-ID ;don't accept to register without FQDN Hope that help -- Daniel
Hi, Am Mittwoch, den 18.09.2013, 14:29 +0100 schrieb gpxctawjc5oh at irational.org:> Hello > > i am trying to setup sipgate gateway > > i can get incoming calls fine, but when i dial in and then try to dial > out i get this in asterisk command lineWhat Sipgate product are You using? At least in Germany there are different configurations for the different products necessary. For Sipgate trunking and Sipgate team You have to configure an outboundproxy (which differs between both products). For Sipgate Basic you don't need an outboundproxy. As far as I remember there was an issue with some asterisk versions and the outboundproxy for Sipdate team. Karsten