hello list, i have a question related to zapata.conf,if i do any change in zapata.conf i must restart asterisk or just i restart zapata ,and how to do . ?service zaptel restart? or there is any other command Thanks and regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/1db0fd8e/attachment.htm>
it depends a little bit on the driver and asterisk version... the safest way to become changes applied is to stop asterisk, reload the driver and than start asterisk again. regards, yves btw..: zaptel ist outdated... you should definitely upgrade using dahdi drivers... Am 25.03.2013 11:44, schrieb Salaheddine Elharit:> hello list, > > i have a question related to zapata.conf,if i do any change in > zapata.conf i must restart asterisk or just i restart zapata ,and how > to do . > > "service zaptel restart" or there is any other command > > Thanks and regards > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/9e4f16b6/attachment.htm>
i use asterisk 1.4, how i can do to reload dirver 1.service asterisk stop 2 CLI> reload chan_zap.so 3 service asterisk start that is right or i miss something ? 2013/3/25 Yves A. <yves030 at gmx.de>> it depends a little bit on the driver and asterisk version... > the safest way to become changes applied is to stop asterisk, reload the > driver and than start asterisk again. > > regards, > yves > > btw..: > zaptel ist outdated... you should definitely upgrade using dahdi drivers... > > > Am 25.03.2013 11:44, schrieb Salaheddine Elharit: > > hello list, > > i have a question related to zapata.conf,if i do any change in > zapata.conf i must restart asterisk or just i restart zapata ,and how to do > . > > ?service zaptel restart? or there is any other command > > Thanks and regards > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/d79f32ce/attachment.htm>
Service asterisk stop Service zaptel restart Service asterisk start -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit Sent: Monday, March 25, 2013 11:04 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] question about zapata.conf i use asterisk 1.4, how i can do to reload dirver 1.service asterisk stop 2 CLI> reload chan_zap.so 3 service asterisk start that is right or i miss something ? 2013/3/25 Yves A. <yves030 at gmx.de> it depends a little bit on the driver and asterisk version... the safest way to become changes applied is to stop asterisk, reload the driver and than start asterisk again. regards, yves btw..: zaptel ist outdated... you should definitely upgrade using dahdi drivers... Am 25.03.2013 11:44, schrieb Salaheddine Elharit: hello list, i have a question related to zapata.conf,if i do any change in zapata.conf i must restart asterisk or just i restart zapata ,and how to do . "service zaptel restart" or there is any other command Thanks and regards -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
thank you so much fo the upgrade from zptel to dahdi, if there is any possibility to upgrade to dahdi without impacting my installation of asterisk and other application already installed in my server. if you can tell how to upgrade using dahdi drivers thanks and best regards 2013/3/25 Eric Wieling <EWieling at nyigc.com>> Service asterisk stop > Service zaptel restart > Service asterisk start > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto: > asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit > Sent: Monday, March 25, 2013 11:04 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] question about zapata.conf > > i use asterisk 1.4, how i can do to reload dirver > > 1.service asterisk stop > 2 CLI> reload chan_zap.so > 3 service asterisk start > that is right or i miss something ? > > > > > > 2013/3/25 Yves A. <yves030 at gmx.de> > > > it depends a little bit on the driver and asterisk version... > the safest way to become changes applied is to stop asterisk, > reload the driver and than start asterisk again. > > regards, > yves > > btw..: > zaptel ist outdated... you should definitely upgrade using dahdi > drivers... > > > Am 25.03.2013 11:44, schrieb Salaheddine Elharit: > > > hello list, > > i have a question related to zapata.conf,if i do any > change in zapata.conf i must restart asterisk or just i restart zapata ,and > how to do . > > "service zaptel restart" or there is any other command > > Thanks and regards > > > > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar > every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > New to Asterisk? Join us for a live introductory webinar every > Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/1f746d67/attachment.htm>
hi, migrating from zaptel to dahdi HAS an impact... new config files, new options and a new channeldriver that has to be used in your dialplan ... you would have to select the DAHDI channel instead of your ZAP channel when dialing... if you?re to afraid to do it... then leave it as it is and follow the ntars-maxime (never touch a running system)... regards, yves Am 25.03.2013 16:15, schrieb Salaheddine Elharit:> thank you so much > > fo the upgrade from zptel to dahdi, if there is any possibility to > upgrade to dahdi without impacting my installation of asterisk and > other application already installed in my server. > > if you can tell how to upgrade using dahdi drivers > > thanks and best regards > > > 2013/3/25 Eric Wieling <EWieling at nyigc.com <mailto:EWieling at nyigc.com>> > > Service asterisk stop > Service zaptel restart > Service asterisk start > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > <mailto:asterisk-users-bounces at lists.digium.com> > [mailto:asterisk-users-bounces at lists.digium.com > <mailto:asterisk-users-bounces at lists.digium.com>] On Behalf Of > Salaheddine Elharit > Sent: Monday, March 25, 2013 11:04 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] question about zapata.conf > > i use asterisk 1.4, how i can do to reload dirver > > 1.service asterisk stop > 2 CLI> reload chan_zap.so > 3 service asterisk start > that is right or i miss something ? > > > > > > 2013/3/25 Yves A. <yves030 at gmx.de <mailto:yves030 at gmx.de>> > > > it depends a little bit on the driver and asterisk version... > the safest way to become changes applied is to stop > asterisk, reload the driver and than start asterisk again. > > regards, > yves > > btw..: > zaptel ist outdated... you should definitely upgrade using > dahdi drivers... > > > Am 25.03.2013 11:44, schrieb Salaheddine Elharit: > > > hello list, > > i have a question related to zapata.conf,if i do > any change in zapata.conf i must restart asterisk or just i > restart zapata ,and how to do . > > "service zaptel restart" or there is any other command > > Thanks and regards > > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory > webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar > every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/1d4cfcc7/attachment.htm>
ok thank you so much for your help and support 2013/3/25 Yves A. <yves030 at gmx.de>> hi, > migrating from zaptel to dahdi HAS an impact... new config files, new > options and a new channeldriver that has to be > used in your dialplan ... you would have to select the DAHDI channel > instead of your ZAP channel when dialing... > if you?re to afraid to do it... then leave it as it is and follow the > ntars-maxime (never touch a running system)... > regards, > yves > > Am 25.03.2013 16:15, schrieb Salaheddine Elharit: > > thank you so much > > fo the upgrade from zptel to dahdi, if there is any possibility to > upgrade to dahdi without impacting my installation of asterisk and other > application already installed in my server. > > if you can tell how to upgrade using dahdi drivers > > thanks and best regards > > > 2013/3/25 Eric Wieling <EWieling at nyigc.com> > >> Service asterisk stop >> Service zaptel restart >> Service asterisk start >> >> -----Original Message----- >> From: asterisk-users-bounces at lists.digium.com [mailto: >> asterisk-users-bounces at lists.digium.com] On Behalf Of Salaheddine Elharit >> Sent: Monday, March 25, 2013 11:04 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] question about zapata.conf >> >> i use asterisk 1.4, how i can do to reload dirver >> >> 1.service asterisk stop >> 2 CLI> reload chan_zap.so >> 3 service asterisk start >> that is right or i miss something ? >> >> >> >> >> >> 2013/3/25 Yves A. <yves030 at gmx.de> >> >> >> it depends a little bit on the driver and asterisk version... >> the safest way to become changes applied is to stop asterisk, >> reload the driver and than start asterisk again. >> >> regards, >> yves >> >> btw..: >> zaptel ist outdated... you should definitely upgrade using dahdi >> drivers... >> >> >> Am 25.03.2013 11:44, schrieb Salaheddine Elharit: >> >> >> hello list, >> >> i have a question related to zapata.conf,if i do any >> change in zapata.conf i must restart asterisk or just i restart zapata ,and >> how to do . >> >> "service zaptel restart" or there is any other command >> >> Thanks and regards >> >> >> >> >> >> -- >> >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by >> http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar >> every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> -- >> >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by >> http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every >> Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130325/b362e30c/attachment-0001.htm>
On Mon, Mar 25, 2013 at 10:44:47AM +0000, Salaheddine Elharit wrote:> hello list, > > i have a question related to zapata.conf,if i do any change in zapata.conf > i must restart asterisk or just i restart zapata ,and how to do . > > ?service zaptel restart? or there is any other command/etc/asterisk/zapata.conf is a configuration ifle of Asterisk's chan_zap.so alone. So changes to it would generally require no more than restart of Asterisk. The simpler of them would be applied with a simple reload (or 'reload chan_zap.so' as you mention). -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir