For some reason 1.4.4.x was not reading chan_dahdi.conf. When I symlinked it to zapata.conf it worked. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling Sent: Wednesday, May 30, 2012 2:35 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] Sangoma Card Issue Has anyone experienced an issue with Sangoma analog cards where the card suddenly stops working? Trying to dial out shows the channel as busy, even though there is no active call on that port? This happened to us often when we used Digium cards (in fact this issue is why we stopped using Digium). -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
On 06/06/2012 09:46 AM, Eric Wieling wrote:> For some reason 1.4.4.x was not reading chan_dahdi.conf. When I symlinked it to zapata.conf it worked.That means Asterisk (1.4.4.x?) was built against Zaptel, not DAHDI. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com & www.asterisk.org