mark morreny
2008-Mar-27 10:08 UTC
[asterisk-users] Problem with socket_process: Call rejected by 127.0.0.1: Busy
Hi I am not sure why this is happening or whether it has anything to do with my iaxmodem setup. When receiving a fax via iaxmodem, I got an error message saying *chan_iax2.c:7542 socket_process: Call rejected by 127.0.0.1: Busy*
Al Baker
2008-Mar-27 10:48 UTC
[asterisk-users] Question about PCI Slots for DIGIUMs Boards
I had sent this to Digium Sales and cant get a response from them, I don't. know what that means...... So I thought I would ask it hear since i know others have struggled with this. "I an considering using *your High Density T*1 cards on a number of servers we are considering purchasing. The vendor lists that his system has: PCI Express*: two x8 slots*, t*wo x8 low profile slots*; *PCI-X: 64-bit/100MHz* Could you please clarify *WHICH* of the above listed *PCI slots* are suitable for use with your *High Density T1 cards*. If there is *more than one combination that is possible*, could you please indicate *WHICH *which high density T1 cards will work in *WHICH* type of PCI slot." Thanks for any guidance and help since DIGIUM sales seems to be too busy to advise a potential customer
Jared Smith
2008-Mar-27 12:56 UTC
[asterisk-users] Question about PCI Slots for DIGIUMs Boards
On Thu, 2008-03-27 at 06:48 -0400, Al Baker wrote:> "I an considering using *your High Density T*1 cards on a number of > servers we are considering purchasing.Two-port T1 cards? Four-port T1 cards?> Could you please clarify *WHICH* of the above listed *PCI slots* are > suitable for use with your *High Density T1 cards*. If there is *more > than one combination that is possible*, could you please indicate *WHICH > *which high density T1 cards will work in *WHICH* type of PCI slot."PCI or PCI-X 3.3 Volt Slots --------------------------- TE412P (Quad span T1/E1/J1/PRI with DSP-based Echo Cancellation) TE212P (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) PCI 5.0 Volt Slots --------------------------- TE407P (Quad span T1/E1/J1/PRI with DSP-based Echo Cancellation) TE207P (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) PCI-E (PCI Express) slots ------------------------- TE420B (Quad Span T1/E1/J1/PRI with DSP-based Echo Cancellation) TE220B (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) There are also a variety of models available without the echo cancellation modules onboard, but personally I recommend purchasing the echo cancellation modules in most situations. -- Jared Smith Community Relations Manager Digium, Inc.
Horwich IT Services (Godwin Stewart)
2008-Mar-27 15:24 UTC
[asterisk-users] Question about PCI Slots for DIGIUMs Boards
On Thu, 27 Mar 2008 06:48:58 -0400, Al Baker <bwentdg at pipeline.com> wrote:> "I an considering using *your High Density T*1 cards on a number of > servers we are considering purchasing. The vendor lists that his system > has: > > PCI Express*: two x8 slots*, t*wo x8 low profile slots*; *PCI-X: > 64-bit/100MHz* > > Could you please clarify *WHICH* of the above listed *PCI slots* are > suitable for use with your *High Density T1 cards*.None of the above listed are PCI slots. PCI != PCI Express -- Godwin Stewart - Horwich IT services
Al Baker
2008-Mar-27 16:16 UTC
[asterisk-users] Question about PCI Slots for DIGIUMs Boards
This will be 4 T1s to a card.So, just so I am not confused. In my original e-mail I said " "I an considering using *your High Density T*1 cards on a number of servers we are considering purchasing. The VENDOR lists that his SYSTEM has: PCI Express*: two x8 slots*, twoo x8 low profile slots*; *PCI-X: 64-bit/100MHz* ===========================And you list 3 possible PCI slots for your DIGIUM Quad T1 Cards PCI or PCI-X 3.3 Volt Slots PCI 5.0 Volt Slots PCI-E (PCI Express) slots =========================Here is the Confusion - 1) Can ANY of your QUAD cards go in the "PCI Express - two x8 slots" - Yes or NO ? 2 Can ANY of your QUAD cards go in the "PCI Express - two x8 LOW Profile Slots" - Yes or No ? 3) Can your Quad cards you list as fitting a "PCI or PCI-X 3.3 Volt Slots" fit in the "PCI-X: 64-bit/100MHz" slot OR would I have to ask the vendor "Is this PCI-X: 64-bit/100MHz" definitely a 3.3 Volt Slot ? Yes - It would absolutely definitely fit OR NO - It will NOT fit OR To answer that I need more info ????? THX for your help Jared Smith wrote:> On Thu, 2008-03-27 at 06:48 -0400, Al Baker wrote: > >> "I an considering using *your High Density T*1 cards on a number of >> servers we are considering purchasing. >> > > Two-port T1 cards? Four-port T1 cards? > > >> Could you please clarify *WHICH* of the above listed *PCI slots* are >> suitable for use with your *High Density T1 cards*. If there is *more >> than one combination that is possible*, could you please indicate *WHICH >> *which high density T1 cards will work in *WHICH* type of PCI slot." >> > > PCI or PCI-X 3.3 Volt Slots > --------------------------- > TE412P (Quad span T1/E1/J1/PRI with DSP-based Echo Cancellation) > TE212P (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) > > PCI 5.0 Volt Slots > --------------------------- > TE407P (Quad span T1/E1/J1/PRI with DSP-based Echo Cancellation) > TE207P (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) > > PCI-E (PCI Express) slots > ------------------------- > TE420B (Quad Span T1/E1/J1/PRI with DSP-based Echo Cancellation) > TE220B (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) > > There are also a variety of models available without the echo > cancellation modules onboard, but personally I recommend purchasing the > echo cancellation modules in most situations. > >
Al Baker
2008-Mar-27 18:27 UTC
[asterisk-users] Question about PCI Slots for DIGIUMs Boards
Ok - that is even more confusing , since one of them looks like it MIGHT be a PCI slot in the list "PCI Express*: two x8 slots*, t*wo x8 low profile slots*; *PCI-X: 64-bit/100MHz* | / \ | | | | | | So now I am really confused, because "Jared Smith -Community Relations Manager,Digium, Inc." said in His Post Quote " *PCI or PCI-*X 3.3 Volt Slots --------------------------- TE412P (Quad span T1/E1/J1/PRI with DSP-based Echo Cancellation) TE212P (Dual span T1/E1/J1/PRI with DSP-based Echo Cancellation) " *So, what is the *_Real Answer_* here ? Any and all help greatly appreciatted* Horwich IT Services (Godwin Stewart) wrote:> On Thu, 27 Mar 2008 06:48:58 -0400, Al Baker <bwentdg at pipeline.com> wrote: > > >> "I an considering using *your High Density T*1 cards on a number of >> servers we are considering purchasing. The vendor lists that his system >> has: >> >> PCI Express*: two x8 slots*, t*wo x8 low profile slots*; *PCI-X: >> 64-bit/100MHz* >> >> Could you please clarify *WHICH* of the above listed *PCI slots* are >> suitable for use with your *High Density T1 cards*. >> > > None of the above listed are PCI slots. > > PCI != PCI Express > >