Hello Victor.
First, let me say I am confused about this:
> I've changed the line (chan_unicall.c):
>
> uc_callparm_calling_party_category(callparms,
> UC_CALLER_CATEGORY_NATIONAL_SUBSCRIBER_CALL);
>
> to
>
> uc_callparm_calling_party_category(callparms,
> UC_CALLER_CATEGORY_NATIONAL_PRIORITY_SUBSCRIBER_CALL);
>
> because without this I cant receive calls from the telco. With or without
this I
> can't place calls to the pbx.
I am quite sure you have made a mistake in this statement, why? simply
because this code is executed when YOU START the call to the far end
(whatever it is, Telmex or the other PBX), so it makes no sense to say
that w/o that change you can't receive calls, no sense at all. I am
sure you messed up somewhere else in the configuration files just like
possibly you are doing right now for the PBX. In anycase, I am about
to make a new release of chan_unicall Asterisk driver that will
include a way to modify the calling party category from the dialplan
extensions.conf
Now, regarding your problem when receiving calls from the pbx, I think
you have configured the PBX to not send ANI digits, and you configured
chan_unicall to expect ANI digits, hence the timeout. Try configuring
Asterisk with 0 callerid for the PBX side, or configure the other PBX
to send the proper number of ANI digits.
Regards,
Moises Silva
On Jan 18, 2008 9:41 AM, Victor Toofic <toofics at gmail.com>
wrote:> Hi!
>
> Im having some troubles trying to configure * as a bridge between a telco
> and a pbx with R2, the scenario is this:
>
> ------------ E1/R2 --------- E1/R2 ------------
> | Telco |-------------| * |-------------| PBX |
> | (Telmex) | --------- | |
> ------------ ------------
>
> I can receive calls from the telco and can place calls to the pbx, I also
> can place calls to the telco.. but I can't receive any calls from the
pbx.
> When receive a call from the pbx I get this:
>
> cause 32771 - T3 timed out
>
> If I connect the pbx directly to the telco there is no problem, the calls
> are stablished correctly.
>
> Im using the package at:
>
> http://www.moythreads.com/astunicall/downloads/
>
http://www.moythreads.com/astunicall/files/astunicall-1.2.25-0.1.tar.gz
>
> that contains:
>
> asterisk-1.2.25
> spandsp-0.0.4
> unicall-0.0.5pre1
> libmfcr2-0.0.3
> libsupertone-0.0.2
> libunicall-0.0.3
> zaptel-1.2.22
>
> My zaptel.conf is this:
>
> loadzone=mx
> defaultzone=mx
> span=1,1,0,cas,hdb3
> span=2,1,0,cas,hdb3
> span=3,0,0,cas,hdb3
> span=4,0,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
> cas=32-46:1101
> cas=48-62:1101
> cas=63-77:1101
> cas=79-93:1101
> cas=94-103:1101
> cas=110-124:1101
>
> and unicall.conf is this:
>
> [channels]
> usecallerid=no
> hidecallerid=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=no
> cancallforward=no
> callreturn=no
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> immediate=yes
> loglevel=255
> protocolclass=mfcr2
>
> protocolvariant=mx,10,4,16
>
> group=1
> protocolend=cpe
> context=incoming1
> channel => 1-15
> channel => 17-31
>
> group=2
> protocolend=cpe
> context=incoming2
> channel => 32-46
> channel => 48-62
>
> protocolvariant=mx,10,8
>
> group=3
> immediate=yes
> usecallerid=yes
> protocolend=co
> context=incoming3
> channel => 63-77
> channel => 79-93
>
> group=4
> protocolend=co
> context=incoming4
> channel => 94-103
> channel => 110-124
>
> The port #1 of a TE405P card is connected to the telco and the port #3 is
> connected to the pbx.
>
> I've changed the line (chan_unicall.c):
>
> uc_callparm_calling_party_category(callparms,
> UC_CALLER_CATEGORY_NATIONAL_SUBSCRIBER_CALL);
>
> to
>
> uc_callparm_calling_party_category(callparms,
> UC_CALLER_CATEGORY_NATIONAL_PRIORITY_SUBSCRIBER_CALL);
>
> because without this I cant receive calls from the telco. With or without
this I
> can't place calls to the pbx.
>
> When I receive a call from the telco I place it directly to the pbx.. and
> that works ok:
>
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <-
0001
> [1/IDLE /Idle /Idle ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Detected
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Creating a
> new call with CRN 32770
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1101 ->
> [2/DETECTED/Seize ack /Seize ack ]
> Jan 16 12:27:01 NOTICE[4136] chan_unicall.c: Unicall/2 event Detected
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 4
on
> [2/DETECTED/Seize ack /Seize ack ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 6 on ->
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 4
off
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 6 off ->
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 2
on
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 on ->
> [2/DETECTED/Group C /ANI request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 2
off
> [2/DETECTED/Group C /ANI request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 off ->
> [2/DETECTED/Group C /ANI request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- F
on
> [2/DETECTED/Group C /ANI request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 5 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- F
off
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 5 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 6
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 6
off
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 0
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 0
off
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 0
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 3 on ->
> [2/DETECTED/Group B /Go to grp II ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 0
off
> [2/DETECTED/Group B /Go to grp II ]
> Jan 16 12:27:01 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 3 off ->
> [2/DETECTED/Group B /Go to grp II ]
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 2
on
> [2/DETECTED/Group B /Go to grp II ]
> Jan 16 12:27:02 NOTICE[4136] chan_unicall.c: Unicall/2 event Offered
> Jan 16 12:27:02 NOTICE[4136] chan_unicall.c: CRN 32770 - Offered on
> channel 0 (ANI: , DNIS: 4600, Cat: 1)
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Call
> control(5)
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Accept call
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 on ->
> [2/OFFERED /Group B /Accepted Paid]
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 <- 2
off
> [2/OFFERED /Group B /Accepted Paid]
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 1 off ->
> [2/OFFERED /Group B /Accepted Paid]
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Answer guard
> expired
> Jan 16 12:27:02 NOTICE[4136] chan_unicall.c: Unicall/2 event Accepted
> Jan 16 12:27:02 DEBUG[4136] chan_unicall.c: MFC/R2 UniCall/2 Channel gains
> Jan 16 12:27:02 DEBUG[4146] pbx.c: Function result is ''
> Jan 16 12:27:02 NOTICE[4146] chan_unicall.c: Answer Call
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/2 Call
> control(6)
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/2 Answer call
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/2 0101 ->
> [1/ACCEPTED/Answer /Accepted Paid]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: unicall_call called -
> 'g3/4600'
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 Call
> control(1)
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 Make call
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 Creating a
> new call with CRN 32770
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 0001 ->
> [1/DIALING /Seize /Idle ]
> Jan 16 12:27:02 NOTICE[4146] chan_unicall.c: Unicall/64 event Dialing
> Jan 16 12:27:02 NOTICE[4146] chan_unicall.c: Unicall/2 event Answered
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/2 Channel echo
> cancel
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: Enabled echo cancellation on
> channel 2
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: Exception on 72, channel 64
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <-
1101
> [1/DIALING /Seize /Idle ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 4 on ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
on
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 4 off ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
> off [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 6 on ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
on
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 6 off ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
> off [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 0 on ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
on
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:02 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 0 off ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
> off [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 0 on ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 3
on
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 0 off ->
> [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 3
> off [2/DIALING /Group I /DNIS ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 2 on ->
> [2/PROCEED /Group II /Category ]
> Jan 16 12:27:03 NOTICE[4146] chan_unicall.c: Unicall/64 event Proceeding
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
on
> [2/PROCEED /Group II /Category ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 2 off ->
> [2/PROCEED /Group II /Category ]
> Jan 16 12:27:03 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <- 1
> off [2/PROCEED /Group II /Category ]
> Jan 16 12:27:03 NOTICE[4146] chan_unicall.c: Unicall/64 event Alerting
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Exception on 72, channel 64
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 <-
0101
> [1/ALERTING/Await answer /Category ]
> Jan 16 12:27:27 NOTICE[4146] chan_unicall.c: Unicall/64 event Connected
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: MFC/R2 UniCall/64 Channel echo
> cancel
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Enabled echo cancellation on
> channel 64
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: needanswer
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: unicall_bridge called
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Stoping tones on 2/0 talking
> to 64/0
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Stoping tones on 64/0 talking
> to 2/0
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Making 64 slave to master 2
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Added 72 to conference
> 3848/1023
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Added 12 to conference
> 3848/1023
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Updated conferencing on 2,
> with 2 conference users
> Jan 16 12:27:27 DEBUG[4146] chan_unicall.c: Updated conferencing on 64,
> with 0 conference users
>
>
> But when I receive a call from the pbx.. I get this:
>
> Jan 16 12:20:39 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <-
0001
> [1/IDLE /Idle /Idle ]
> Jan 16 12:20:39 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 Detected
> Jan 16 12:20:39 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 Creating a
> new call with CRN 32770
> Jan 16 12:20:39 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1101 ->
> [2/DETECTED/Seize ack /Seize ack ]
> Jan 16 12:20:39 NOTICE[4085] chan_unicall.c: Unicall/65 event Detected
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 8
on
> [2/DETECTED/Seize ack /Seize ack ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 8
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/64 R2 prot.
> err. [2/DETECTED/Group C /Category req ] cause 32771 - T3 timed out
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/64 1001 ->
> [1/IDLE /Idle /Idle ]
> Jan 16 12:20:41 NOTICE[4085] chan_unicall.c: Unicall/64 event Protocol
> failure
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/64 Channel echo
> cancel
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: disabled echo cancellation on
> channel 64
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/64 <-
1001
> [1/IDLE /Idle /Idle ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/64 1001 ->
> [1/IDLE /Idle /Idle ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 2
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 2
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 4
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 4
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:41 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:42 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 5
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:42 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:42 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 5
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:42 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 5
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 5
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 0
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 0
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:43 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:44 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 0
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:44 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 on ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:44 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 0
> off [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:44 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1 off ->
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:45 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 7
on
> [2/DETECTED/Group A /DNIS request ]
> Jan 16 12:20:45 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 6 on ->
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:20:45 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 <- 7
> off [2/DETECTED/Group C /Category req ]
> Jan 16 12:20:45 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 6 off ->
> [2/DETECTED/Group C /Category req ]
> Jan 16 12:20:50 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 R2 prot.
> err. [2/DETECTED/Group C /Category req ] cause 32771 - T3 timed out
> Jan 16 12:20:50 DEBUG[4085] chan_unicall.c: MFC/R2 UniCall/65 1001 ->
> [1/IDLE /Idle /Idle ]
> Jan 16 12:20:50 NOTICE[4085] chan_unicall.c: Unicall/65 event Protocol
> failure
>
>
> I've tried a lot of variations with these variables:
>
> protocolvariant=mx,10,8
> group=3
> immediate=yes
> usecallerid=yes
> protocolend=co
>
> adding 8 16 24 at the end of protocolvariant (4th param), using
immediate=no,
> usecallerid=no, protocolend=cpe and protocolend=co.. I mean.. I've
tried a
> lot of combinations without success.
>
> Dont know if this is a configuration related problem.. or there is
> something else I am missing ?? Hope someone could help me. Thanks...
>
> PS. Sorry for the long mail.
>
> --
> Greetings..
> Victor Toofic
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
"Within C++, there is a much smaller and cleaner language struggling
to get out."