New install, using TDM400p. wctdm is loaded, asterisk loads. Zaptel and zapata.conf are from a working system, same model board, same module locations. CLI command zap show status shows all OK, zap show channels shows nothing defined. Incoming calls show nothing on CLI, analog handsets have no dial tone and, of course, shown nohting on CLI. joe a.
Hi joe, seems like your card is working but not your modules...have you checked if the led on the TDM400P are on? Try to change the FXO/FXS modules, maybe they are not working good. Giorgio joe acquisto wrote:> New install, using TDM400p. wctdm is loaded, asterisk loads. Zaptel and zapata.conf are from a working system, same model board, same module locations. > > CLI command zap show status shows all OK, zap show channels shows nothing defined. > > Incoming calls show nothing on CLI, analog handsets have no dial tone and, of course, shown nohting on CLI. > > joe a. > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >
Thanks. Turns out etc/asterisk/zapata.conf had two entries for [channels]. First one was blank. I had cut and pasted and somehow did not notice this utill I was on the phone with Digium. I guess asterisk reads the first and ignores the next one. Removing the first one fixed the problem. joe a. Giorgio Incantalupo<gincantalupo@fgasoftware.com> Wrote: 3/19/2007 12:22 PM:> Hi joe, > seems like your card is working but not your modules...have you checked > if the led on the TDM400P are on? > Try to change the FXO/FXS modules, maybe they are not working good. > > > Giorgio > > > joe acquisto wrote: >> New install, using TDM400p. wctdm is loaded, asterisk loads. Zaptel and >> zapata.conf are from a working system, same model board, same module >> locations. >> >> CLI command zap show status shows all OK, zap show channels shows nothing >> defined. >> >> Incoming calls show nothing on CLI, analog handsets have no dial tone and, >> of course, shown nohting on CLI. >> >> joe a. >> >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users