You may want to give a try to this document I wrote about mfcr2 with Asterisk.
http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf
Regards
On 11/24/06, Alyed Tzompa <alyed.tzompa@simitel.com>
wrote:> Hello!
>
> I'm tryuing to bring up an R2 connection but eventhough I've
followed the
> guidelines in: http://zarzamora.com.mx/asterisk/17
> something seems to be missing.
>
>
> When an incomming call is generated I get:
>
> Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 <- 0001 [1/ 1/Idle /Idle ]
> Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Detected
> Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Making a new call with CRN 32771
> Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 1101 -> [2/ 2/Idle /Idle ]
> Nov 24 06:01:17 WARNING[-197416016]: chan_unicall.c:2672 handle_uc_event:
> Unicall/24 event Detected
>
> and that's it, afterwards just a busy tone and the telco guy says the
> channel turns "sealed".
>
>
> When I try an outbound call I get:
>
> -- Attempting call on Unicall/g2/12345678 for s@default:1 (Retry 1)
> Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Call control(1)
> Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Make call
> Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Making a new call with CRN 32769
> Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 0001 -> [1/ 1/Idle /Idle ]
> Nov 24 05:53:52 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event:
> Unicall/24 event Dialing
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 seize_ack_wait_expired
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 R2 prot. err. [1/ 40/Seize /Idle ] cause
> 32776 - Seize ack timed out
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 1001 -> [1/ 1/Idle /Idle ]
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:2672 handle_uc_event:
> Unicall/24 event Protocol failure
> -- Unicall/24 protocol error. Cause 32776
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Channel echo cancel
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Channel gains
> Nov 24 05:53:54 WARNING[-286483536]: chan_unicall.c:612 unicall_report:
> MFC/R2 UniCall/24 Channel switching
> -- Hungup 'UniCall/24-1'
> Nov 24 05:53:54 NOTICE[-286483536]: pbx_spool.c:234 attempt_thread: Call
> failed to go through, reason 1
>
>
>
> Something else funny is happening: as soon as the telco makes a reset of
> the trunk they say they start receving data as if the PBX would be
> generating calls, then all channels go "sealed" except for 1.
>
>
> Anyone having an idea on how to solve this?
>
>
> Alyed
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
--
"Su nombre es GNU/Linux, no solamente Linux, mas info en
http://www.gnu.org"