On Tue, Oct 10, 2006 at 11:43:09PM +0100, David Bath
wrote:> Hi All,
>
>
>
> I've tried to find the solution to this, but sadly met with failure.
> I've got an asterisk box with two X100P's in, and both cards have
the
> same strange problem. After 2min 40seconds (always: within +/- 1sec)
> they drop an outbound call. Inbound calls are not affected... they stay
> up as long as required.
>
Do you use busydetect? Any chance that there's a busy tone there?
>
>
> I've seen a fair bit of chatter about similar kinds of problems
> sometimes being related to callprogess detecting false hang-ups, so
I've
> made sure this is disabled in Zapata.conf but it seems to have had no
> effect.
>
>
>
> I was running a slightly older version of zaptel/asterisk (1.2.0) and
> I've upgraded to the lastest build, but also with no success.
Details, pleasse:
zapata.conf
logs from a call (set verbose to at least 3, and enable full in
logger.conf).
--
Tzafrir Cohen sip:tzafrir@local.xorcom.com
icq#16849755 iax:tzafrir@local.xorcom.com
+972-50-7952406 jabber:tzafrir@jabber.org
tzafrir.cohen@xorcom.com http://www.xorcom.com