Hi all, i've an hipath conneted to my asterisk box by a TE110P i can call from astersik to any hipath extension but i can't call from hipath extensions to astersik ones. asterisk (te110p) <--> (TMS2) hipath 3550 in the future i'll connect the hipath to a telecom pri. the pri in the hipath is configured as EURO PP (with CRC4) i've already checked all previust post about this topic without any clue. many thanks /etc/zaptel.conf span=1,0,0,ccs,hdb3,crc4,yellow bchan=1-15 dchan=16 bchan=17-31 loadzone=it defaultzone=it ---------------------------- /etc/asterisk/zapata.conf [trunkgroups] [channels] language=it context=from-zaptel signalling=pri_net switchtype=euroisdn rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1-15 channel => 17-31 ------------------------------- thats the debug when i try to call from the hipath < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1), class= Normal Event (0) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1), class= Normal Event (0) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null ---------------------------------- bye bivio -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061002/5c051360/attachment.htm
Giordano Grandis
2006-Oct-02 01:25 UTC
R: [asterisk-users] Siemens Hipath <-> asterisk, pri problem
Look at your extensions in context "from-zaptel" adding the s extensions and add immediate=yes in zapata.conf Ciao ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di bivio Inviato: luned? 2 ottobre 2006 10.04 A: asterisk-users@lists.digium.com Oggetto: [asterisk-users] Siemens Hipath <-> asterisk, pri problem Hi all, i've an hipath conneted to my asterisk box by a TE110P i can call from astersik to any hipath extension but i can't call from hipath extensions to astersik ones. asterisk (te110p) <--> (TMS2) hipath 3550 in the future i'll connect the hipath to a telecom pri. the pri in the hipath is configured as EURO PP (with CRC4) i've already checked all previust post about this topic without any clue. many thanks /etc/zaptel.conf span=1,0,0,ccs,hdb3,crc4,yellow bchan=1-15 dchan=16 bchan=17-31 loadzone=it defaultzone=it ---------------------------- /etc/asterisk/zapata.conf [trunkgroups] [channels] language=it context=from-zaptel signalling=pri_net switchtype=euroisdn rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1-15 channel => 17-31 ------------------------------- thats the debug when i try to call from the hipath < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) ]NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan ( E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) ]NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null ---------------------------------- bye bivio -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061002/dcb45d4f/attachment.htm
Marco Mouta
2006-Oct-02 01:43 UTC
[asterisk-users] Siemens Hipath <-> asterisk, pri problem
please post your from-zaptel context in extensions.conf On 10/2/06, bivio <elbivio@gmail.com> wrote:> > Hi all, > i've an hipath conneted to my asterisk box by a TE110P i can call from > astersik to any hipath extension but i can't call from hipath extensions to > astersik ones. > asterisk (te110p) <--> (TMS2) hipath 3550 in the future i'll connect the > hipath to a telecom pri. > > the pri in the hipath is configured as EURO PP (with CRC4) > i've already checked all previust post about this topic without any clue. > many thanks > > /etc/zaptel.conf > > span=1,0,0,ccs,hdb3,crc4,yellow > bchan=1-15 > dchan=16 > bchan=17-31 > loadzone=it > defaultzone=it > ---------------------------- > > /etc/asterisk/zapata.conf > > [trunkgroups] > > [channels] > > language=it > context=from-zaptel > signalling=pri_net > switchtype=euroisdn > rxwink=300 ; Atlas seems to use long (250ms) winks > ; > ; Whether or not to do distinctive ring detection on FXO lines > ; > ;usedistinctiveringdetection=yes > > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=no > echotraining=800 > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > channel => 1-15 > channel => 17-31 > > ------------------------------- > > thats the debug when i try to call from the hipath > > < Protocol Discriminator: Q.931 (8) len=26 > < Call Ref: len= 2 (reference 1/0x1) (Originator) > < Message type: SETUP (5) > < [04 03 80 90 a3] > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > < Ext: 1 User information layer 1: A-Law > (35) > < [18 03 a1 83 9f] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > < Ext: 1 Channel: 31 ] > < [6c 05 01 80 31 30 30] > < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > < Presentation: Presentation permitted, user > number not screened (0) '100' ] > < [7d 02 91 81] > < IE: High-layer Compatibility (len = 4) > -- Making new call for cr 1 > -- Processing Q.931 Call Setup > -- Processing IE 4 (cs0, Bearer Capability) > -- Processing IE 24 (cs0, Channel Identification) > -- Processing IE 108 (cs0, Calling Party Number) > -- Processing IE 125 (cs0, High-layer Compatibility) > -- Extension '' in context 'from-zaptel' from '100' does not exist. > Rejecting call on channel 0/31, span 1 > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate > Call Initiated > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 1/0x1) (Terminator) > > Message type: RELEASE COMPLETE (90) > > [08 02 81 81] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Unallocated (unassigned) number (1), > class = Normal Event (0) ] > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > < Protocol Discriminator: Q.931 (8) len=26 > < Call Ref: len= 2 (reference 1/0x1) (Originator) > < Message type: SETUP (5) > < [04 03 80 90 a3] > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > < Ext: 1 User information layer 1: A-Law > (35) > < [18 03 a1 83 9f] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified Channel > Type: 3 > < Ext: 1 Channel: 31 ] > < [6c 05 01 80 31 30 30] > < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: > ISDN/Telephony Numbering Plan ( E.164/E.163) (1) > < Presentation: Presentation permitted, user > number not screened (0) '100' ] > < [7d 02 91 81] > < IE: High-layer Compatibility (len = 4) > -- Making new call for cr 1 > -- Processing Q.931 Call Setup > -- Processing IE 4 (cs0, Bearer Capability) > -- Processing IE 24 (cs0, Channel Identification) > -- Processing IE 108 (cs0, Calling Party Number) > -- Processing IE 125 (cs0, High-layer Compatibility) > -- Extension '' in context 'from-zaptel' from '100' does not exist. > Rejecting call on channel 0/31, span 1 > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate > Call Initiated > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 1/0x1) (Terminator) > > Message type: RELEASE COMPLETE (90) > > [08 02 81 81] > > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Unallocated (unassigned) number (1), > class = Normal Event (0) ] > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > ---------------------------------- > > bye > bivio > > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > >-- Com os melhores cumprimentos, Marco Mouta -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061002/4ab4438a/attachment.htm
Viktor Tatianin
2006-Oct-02 01:55 UTC
[asterisk-users] Siemens Hipath <-> asterisk, pri problem
Hello I connect HICOM to Asterisk Zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-isdn-external ;signalling=fxs_ks ;rxwink=300 ; Atlas seems to use long (250ms) winks signalling=pri_cpe switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown callerid=asreceived usedistinctiveringdetection=yes usecallingpres=yes ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=400 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf ;Include AMP configs #include zapata_additional.conf channel=> 1-15,17-31 zaptel.conf # Global data span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of bivio Sent: Monday, October 02, 2006 11:04 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] Siemens Hipath <-> asterisk, pri problem Hi all, i've an hipath conneted to my asterisk box by a TE110P i can call from astersik to any hipath extension but i can't call from hipath extensions to astersik ones. asterisk (te110p) <--> (TMS2) hipath 3550 in the future i'll connect the hipath to a telecom pri. the pri in the hipath is configured as EURO PP (with CRC4) i've already checked all previust post about this topic without any clue. many thanks /etc/zaptel.conf span=1,0,0,ccs,hdb3,crc4,yellow bchan=1-15 dchan=16 bchan=17-31 loadzone=it defaultzone=it ---------------------------- /etc/asterisk/zapata.conf [trunkgroups] [channels] language=it context=from-zaptel signalling=pri_net switchtype=euroisdn rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=800 rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no channel => 1-15 channel => 17-31 ------------------------------- thats the debug when i try to call from the hipath < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1), class= Normal Event (0) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null < Protocol Discriminator: Q.931 (8) len=26 < Call Ref: len= 2 (reference 1/0x1) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < Ext: 1 User information layer 1: A-Law (35) < [18 03 a1 83 9f] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Preferred Dchan: 0 < ChanSel: Reserved < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 31 ] < [6c 05 01 80 31 30 30] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan ( E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '100' ] < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) -- Making new call for cr 1 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 125 (cs0, High-layer Compatibility) -- Extension '' in context 'from-zaptel' from '100' does not exist. Rejecting call on channel 0/31, span 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Present, peerstate Call Initiated> Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 1/0x1) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 81] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:Private network serving the local user (1)> Ext: 1 Cause: Unallocated (unassigned) number (1), class= Normal Event (0) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null ---------------------------------- bye bivio -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061002/d3d08ccf/attachment.htm