asterisk users - Jul 2006 - FXS: No ringtone

Hi all,

I am running Asterisk 1.2.7.1, with a Sangoma A101 card in it.  I also have 2
Digium FXO cards, and
I have premicells connected to the FXO's .  Calls come in off the Sangoma E1
cards, from a Philips
PABX.  The problem I have is that the user, when he dials from his desk phone,
does not get any
ringtone when he dials  a cell phone, which goes over the premicells.  So the
cell phone will ring,
but the user wont hear anything until the cell perosn answers, then
everything's fine.  But when I
try to debug it, I used a sip phone to dial a cell number, that you get
ringtone.

Yet other calls from the PBX, non cell calls, have ringtone.  So when a call
uses the E1 anf FXO, I
get no ringtone.

Has anyone seen this before

-- 
thanks,
yusuf

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

On Jul 10, 2006, at 1:23 AM, yusuf wrote:
> Hi all,
>
> I am running Asterisk 1.2.7.1, with a Sangoma A101 card in it.  I also 
> have 2 Digium FXO cards, and I have premicells connected to the FXO's 
> .  Calls come in off the Sangoma E1 cards, from a Philips PABX.  The 
> problem I have is that the user, when he dials from his desk phone, 
> does not get any ringtone when he dials  a cell phone, which goes over 
> the premicells.  So the cell phone will ring, but the user wont hear 
> anything until the cell perosn answers, then everything's fine.  But 
> when I try to debug it, I used a sip phone to dial a cell number, that 
> you get ringtone.
>
> Yet other calls from the PBX, non cell calls, have ringtone.  So when 
> a call uses the E1 anf FXO, I get no ringtone.
>
> Has anyone seen this before
>
Oh yeah, what you are talking about is ring back, not ringtone.  I 
think the r option in the asterisk dial command might help you as that 
forces ringback.

Marty